Both of these drivers use ioport_map(), so they need to
depend on HAS_IOPORT_MAP. Otherwise, they cannot be built
even with COMPILE_TEST on architectures without an ioport
implementation, such as ARCH=um.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>

Pull gpio updates from Bartosz Golaszewski:

 - new driver for the Realtek Otto GPIO controller

 - ACPI support for gpio-mpc8xxx

 - edge event support for gpio-sch (+ Kconfig fixes)

 - Kconfig improvements in gpio-ich

 - fixes to older issues in gpio-mockup

 - ACPI quirk for ignoring EC wakeups on Dell Venue 10 Pro 5055

 - improve the GPIO aggregator code by using more generic interfaces
   instead of reimplementing them in the driver

 - convert the DT bindings for gpio-74x164 to yaml

 - documentation improvements

 - a slew of other minor fixes and improvements to GPIO drivers

* tag 'gpio-updates-for-v5.13-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (34 commits)
  dt-bindings: gpio: add YAML description for rockchip,gpio-bank
  gpio: mxs: remove useless function
  dt-bindings: gpio: fairchild,74hc595: Convert to json-schema
  gpio: it87: remove unused code
  gpio: 104-dio-48e: Fix coding style issues
  gpio: mpc8xxx: Add ACPI support
  gpio: ich: Switch to be dependent on LPC_ICH
  gpio: sch: Drop MFD_CORE selection
  gpio: sch: depends on LPC_SCH
  gpiolib: acpi: Add quirk to ignore EC wakeups on Dell Venue 10 Pro 5055
  gpio: sch: Hook into ACPI GPE handler to catch GPIO edge events
  gpio: sch: Add edge event support
  gpio: aggregator: Replace custom get_arg() with a generic next_arg()
  lib/cmdline: Export next_arg() for being used in modules
  gpio: omap: Use device_get_match_data() helper
  gpio: Add Realtek Otto GPIO support
  dt-bindings: gpio: Binding for Realtek Otto GPIO
  docs: kernel-parameters: Add gpio_mockup_named_lines
  docs: kernel-parameters: Move gpio-mockup for alphabetic order
  lib: bitmap: provide devm_bitmap_alloc() and devm_bitmap_zalloc()
  ...

Driver is neither dependent to PCI nor using MFD_CORE.
Replace those dependency and selection by dependency on LPC_ICH.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Since we are depended on LPC_SCH, which selects MFD_CORE,
we don't need to do it ourselves.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Since LPC_SCH provides GPIO functionality, GPIO_SCH should depend on
LPC_SCH to prevent kconfig warning and build errors:

WARNING: unmet direct dependencies detected for LPC_SCH
  Depends on [n]: HAS_IOMEM [=y] && PCI [=n]
  Selected by [y]:
  - GPIO_SCH [=y] && GPIOLIB [=y] && X86 [=y] && (X86 [=y] || COMPILE_TEST [=n]) && ACPI [=y]

and

../drivers/mfd/lpc_sch.c:204:1: warning: data definition has no type or storage class
 module_pci_driver(lpc_sch_driver);
 ^~~~~~~~~~~~~~~~~
../drivers/mfd/lpc_sch.c:204:1: error: type defaults to ‘int’ in declaration of ‘module_pci_driver’ [-Werror=implicit-int]
../drivers/mfd/lpc_sch.c:204:1: warning: parameter names (without types) in function declaration
../drivers/mfd/lpc_sch.c:197:26: warning: ‘lpc_sch_driver’ defined but not used [-Wunused-variable]
 static struct pci_driver lpc_sch_driver = {
                          ^~~~~~~~~~~~~~

Fixes: 6c46215d6b62 ("gpio: sch: Hook into ACPI GPE handler to catch GPIO edge events")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Denis Turischev <denis@compulab.co.il>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Neither the ACPI description on Intel Minnowboard (v1) platform provides
the required information to establish a generic handling nor the hardware
capable of doing it. According to the data sheet the hardware can generate
SCI events. Therefore, we need to hook from the driver into GPE handler of
the ACPI subsystem in order to catch and report GPIO-related events.

Validated on the Inlel Minnowboard (v1) platform and Intel Galileo Gen 2.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Add the required infrastructure to enable and report edge events
of the pins to the GPIO core. The actual hook-up of the event interrupt
will happen separately.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Co-developed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Realtek MIPS SoCs (platform name Otto) have GPIO controllers with up to
64 GPIOs, divided over two banks. Each bank has a set of registers for
32 GPIOs, with support for edge-triggered interrupts.

Each GPIO bank consists of four 8-bit GPIO ports (ABCD and EFGH). Most
registers pack one bit per GPIO, except for the IMR register, which
packs two bits per GPIO (AB-CD).

Although the byte order is currently assumed to have port A..D at offset
0x0..0x3, this has been observed to be reversed on other, Lexra-based,
SoCs (e.g. RTL8196E/97D/97F).

Interrupt support is disabled for the fallback devicetree-compatible
'realtek,otto-gpio'. This allows for quick support of GPIO banks in
which the byte order would be unknown. In this case, the port ordering
in the IMR registers may not match the reversed order in the other
registers (DCBA, and BA-DC or DC-BA).

Signed-off-by: Sander Vanheule <sander@svanheule.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>

Support GPO(s) found from ROHM BD71815 power management IC. The IC has two
GPO pins but only one is properly documented in the data-sheet. The driver
exposes by default only the documented GPO. The second GPO is connected to
E5 pin and is marked as GND in the data-sheet. Control for this
undocumented pin can be enabled using a special DT property.

This driver is derived from work by Peter Yang <yanglsh@embest-tech.com>
although not so much of the original is left.

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

Adds interrupt support to the Xilinx GPIO driver so that rising and
falling edge line events can be supported. Since interrupt support is
an optional feature in the Xilinx IP, the driver continues to support
devices which have no interrupt provided.
Depends on OF_GPIO framework for of_xlate function to translate
gpiospec to the GPIO number and flags.

Signed-off-by: Robert Hancock <hancock@sedsystems.ca>
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>