linux.git/drivers/gpio/Kconfig, branch v5.10

Merge tag 'mfd-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

2020-10-14T22:56:58+00:00

Pull MFD updates from Lee Jones:
 "New Drivers:
   - Add support for initialising shared (between children) Regmaps
   - Add support for Kontron SL28CPLD
   - Add support for ENE KB3930 Embedded Controller
   - Add support for Intel FPGA PAC MAX 10 BMC

  New Device Support:
   - Add support for Power to Ricoh RN5T618
   - Add support for UART to Intel Lakefield
   - Add support for LP87524_Q1 to Texas Instruments LP87565

  New Functionality:
   - Device Tree; ene-kb3930, sl28cpld, syscon, lp87565, lp87524-q1
   - Use new helper dev_err_probe(); madera-core, stmfx, wcd934x
   - Use new GPIOD API; dm355evm_msp
   - Add wake-up capability; sprd-sc27xx-spi
   - Add ACPI support; kempld-core

  Fix-ups:
   - Trivial (spelling/whitespace); Kconfig, ab8500
   - Fix for unused variables; khadas-mcu, kempld-core
   - Remove unused header file(s); mt6360-core
   - Use correct IRQ flags in docs; act8945a, gateworks-gsc, rohm,bd70528-pmic
   - Add COMPILE_TEST support; asic3, tmio_core
   - Add dependency on I2C; SL28CPLD

  Bug Fixes:
   - Fix memory leak(s); sm501
   - Do not free regmap_config's 'name' until exit; syscon"

* tag 'mfd-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (34 commits)
  mfd: kempld-core: Fix unused variable 'kempld_acpi_table' when !ACPI
  mfd: sl28cpld: Depend on I2C
  mfd: asic3: Build if COMPILE_TEST=y
  dt-bindings: mfd: Correct interrupt flags in examples
  mfd: Add ACPI support to Kontron PLD driver
  mfd: intel-m10-bmc: Add Intel MAX 10 BMC chip support for Intel FPGA PAC
  mfd: lp87565: Add LP87524-Q1 variant
  dt-bindings: mfd: Add LP87524-Q1
  dt-bindings: mfd: lp87565: Convert to yaml
  mfd: mt6360: Remove unused include 
  mfd: sm501: Fix leaks in probe()
  mfd: syscon: Don't free allocated name for regmap_config
  dt-bindings: mfd: syscon: Document Exynos3 and Exynos5433 compatibles
  dt-bindings: mfd: syscon: Merge Samsung Exynos Sysreg bindings
  dt-bindings: mfd: ab8500: Remove weird Unicode characters
  mfd: sprd: Add wakeup capability for PMIC IRQ
  mfd: intel-lpss: Add device IDs for UART ports for Lakefield
  mfd: dm355evm_msp: Convert LEDs to GPIO descriptor table
  mfd: wcd934x: Simplify with dev_err_probe()
  mfd: stmfx: Simplify with dev_err_probe()
  ...

gpiolib: add build option for CDEV v1 ABI

2020-09-30T08:56:46+00:00

Add a build option to allow the removal of the CDEV v1 ABI.

Suggested-by: Bartosz Golaszewski 
Signed-off-by: Kent Gibson 
Reviewed-by: Andy Shevchenko 
Signed-off-by: Bartosz Golaszewski

gpiolib: make cdev a build option

2020-09-30T08:56:42+00:00

Make the gpiolib-cdev module a build option.  This allows the CDEV
interface to be removed from the kernel to reduce kernel size in
applications where is it not required, and provides the parent for
other CDEV interface specific build options to follow.

Suggested-by: Bartosz Golaszewski 
Signed-off-by: Kent Gibson 
Reviewed-by: Andy Shevchenko 
Signed-off-by: Bartosz Golaszewski

gpio: mxc: Support module build

2020-09-29T13:04:31+00:00

Change config to tristate, add module device table, module author,
description and license to support module build for i.MX GPIO driver.

As this is a SoC GPIO module, it provides common functions for most
of the peripheral devices, such as GPIO pins control, secondary
interrupt controller for GPIO pins IRQ etc., without GPIO driver, most
of the peripheral devices will NOT work properly, so GPIO module is
similar with clock, pinctrl driver that should be loaded ONCE and
never unloaded.

Since MXC GPIO driver needs to have init function to register syscore
ops once, here still use subsys_initcall(), NOT module_platform_driver().

Signed-off-by: Anson Huang 
Link: https://lore.kernel.org/r/1600320829-1453-1-git-send-email-Anson.Huang@nxp.com
Signed-off-by: Linus Walleij

gpio: Add support for the sl28cpld GPIO controller

2020-09-17T15:00:20+00:00

Add support for the GPIO controller of the sl28 board management
controller. This driver is part of a multi-function device.

A controller has 8 lines. There are three different flavors:
full-featured GPIO with interrupt support, input-only and output-only.

Signed-off-by: Michael Walle 
Reviewed-by: Linus Walleij 
Reviewed-by: Andy Shevchenko 
Signed-off-by: Lee Jones

gpio: dwapb: Convert driver to using the GPIO-lib-based IRQ-chip

2020-08-27T08:32:57+00:00

GPIO-lib provides a ready-to-use interface to initialize an IRQ-chip on
top of a GPIO chip. It's better from maintainability and readability
point of view to use one instead of supporting a hand-written Generic
IRQ-chip-based implementation. Moreover the new implementation won't
cause much functional overhead but will provide a cleaner driver code.
All of that makes the DW APB GPIO driver conversion pretty much justified
especially seeing a tendency of the other GPIO drivers getting converted
too.

Here is what we do in the framework of this commit to convert the driver
to using the GPIO-lib-based IRQ-chip interface:

1) IRQ ack, mask and unmask callbacks are locally defined instead of
using the Generic IRQ-chip ones.

2) An irq_chip structure instance is embedded into the dwapb_gpio
private data. Note we can't have a static instance of that structure since
GPIO-lib will add some hooks into it by calling gpiochip_set_irq_hooks().
A warning about that would have been printed by the GPIO-lib code if we
used a single irq_chip structure instance for multiple DW APB GPIO
controllers.

3) Initialize the gpio_irq_chip structure embedded into the gpio_chip
descriptor. By default there is no IRQ enabled so any event raised will be
handled by the handle_bad_irq() IRQ flow handler. If DW APB GPIO IP-core
is synthesized to have non-shared reference IRQ-lines, then as before the
hierarchical and cascaded cases are distinguished by checking how many
parental IRQs are defined. (Note irq_set_chained_handler_and_data() won't
initialize IRQs, which descriptors couldn't be found.) If DW APB GPIO IP
is used on a platform with shared IRQ line, then we simply won't let the
GPIO-lib to initialize the parental IRQs, but will handle them locally in
the driver.

4) Discard linear IRQ-domain and Generic IRQ-chip initialization, since
GPIO-lib IRQ-chip interface will create a new domain and accept a standard
IRQ-chip structure pointer based on the setting we provided in the
gpio_irq_chip structure.

5) Manually select a proper IRQ flow handler directly in the
irq_set_type() callback by calling irq_set_handler_locked() method, since
an ordinary (not Generic) irq_chip descriptor is now utilized. Note this
shalln't give any regression

6) Alter CONFIG_GPIO_DWAPB kernel config to select
CONFIG_GPIOLIB_IRQCHIP instead of CONFIG_GENERIC_IRQ_CHIP.

Note neither 4) nor 5) shall cause a regression of commit 6a2f4b7dadd5
("gpio: dwapb: use a second irq chip"), since the later isn't properly
used here anyway.

Signed-off-by: Serge Semin 
Reviewed-by: Andy Shevchenko 
Link: https://lore.kernel.org/r/20200730152808.2955-6-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Linus Walleij

gpio: pca9570: add GPO driver for PCA9570

2020-07-16T12:35:12+00:00

NXP PCA9570 is a 4-bit I2C GPO expander without interrupt functionality.
Its ports are controlled only by a data byte without register address.

Signed-off-by: Sungbo Eo 
Reviewed-by: Andy Shevchenko 
Datasheet: https://www.nxp.com/docs/en/data-sheet/PCA9570.pdf
Link: https://lore.kernel.org/r/20200709134829.216393-1-mans0n@gorani.run
Signed-off-by: Linus Walleij

gpio: Drop superfluous dependencies on GPIOLIB

2020-06-24T10:19:47+00:00

All config options for GPIO drivers are inside a big "if GPIOLIB ...
endif" block, so there is no reason for individual config options to
have expicit dependencies on GPIOLIB.  Hence remove them.

Signed-off-by: Geert Uytterhoeven 
Signed-off-by: Bartosz Golaszewski

treewide: replace '---help---' in Kconfig files with 'help'

2020-06-13T16:57:21+00:00

Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.

This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.

There are a variety of indentation styles found.

  a) 4 spaces + '---help---'
  b) 7 spaces + '---help---'
  c) 8 spaces + '---help---'
  d) 1 space + 1 tab + '---help---'
  e) 1 tab + '---help---'    (correct indentation)
  f) 1 tab + 1 space + '---help---'
  g) 1 tab + 2 spaces + '---help---'

In order to convert all of them to 1 tab + 'help', I ran the
following commend:

  $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'

Signed-off-by: Masahiro Yamada

gpio: add a reusable generic gpio_chip using regmap

2020-06-03T08:48:37+00:00

There are quite a lot simple GPIO controller which are using regmap to
access the hardware. This driver tries to be a base to unify existing
code into one place. This won't cover everything but it should be a good
starting point.

It does not implement its own irq_chip because there is already a
generic one for regmap based devices. Instead, the irq_chip will be
instantiated in the parent driver and its irq domain will be associate
to this driver.

For now it consists of the usual registers, like set (and an optional
clear) data register, an input register and direction registers.
Out-of-the-box, it supports consecutive register mappings and mappings
where the registers have gaps between them with a linear mapping between
GPIO offset and bit position. For weirder mappings the user can register
its own .xlate().

Signed-off-by: Michael Walle 
Reviewed-by: Andy Shevchenko 
Link: https://lore.kernel.org/r/20200528145845.31436-3-michael@walle.cc
Signed-off-by: Linus Walleij