Pull EFI fixes from Ard Biesheuvel:
 "The only notable change here is the patch that changes the way we deal
  with spurious errors from the EFI memory attribute protocol. This will
  be backported to v6.6, and is intended to ensure that we will not
  paint ourselves into a corner when we tighten this further in order to
  comply with MS requirements on signed EFI code.

  Note that this protocol does not currently exist in x86 production
  systems in the field, only in Microsoft's fork of OVMF, but it will be
  mandatory for Windows logo certification for x86 PCs in the future.

   - Tighten ELF relocation checks on the RISC-V EFI stub

   - Give up if the new EFI memory attributes protocol fails spuriously
     on x86

   - Take care not to place the kernel in the lowest 16 MB of DRAM on
     x86

   - Omit special purpose EFI memory from memblock

   - Some fixes for the CXL CPER reporting code

   - Make the PE/COFF layout of mixed-mode capable images comply with a
     strict interpretation of the spec"

* tag 'efi-fixes-for-v6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
  x86/efistub: Use 1:1 file:memory mapping for PE/COFF .compat section
  cxl/trace: Remove unnecessary memcpy's
  cxl/cper: Fix errant CPER prints for CXL events
  efi: Don't add memblocks for soft-reserved memory
  efi: runtime: Fix potential overflow of soft-reserved region size
  efi/libstub: Add one kernel-doc comment
  x86/efistub: Avoid placing the kernel below LOAD_PHYSICAL_ADDR
  x86/efistub: Give up if memory attribute protocol returns an error
  riscv/efistub: Tighten ELF relocation check
  riscv/efistub: Ensure GP-relative addressing is not used

Jonathan reports that CXL CPER events dump an extra generic error
message.

	{1}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 1
	{1}[Hardware Error]: event severity: recoverable
	{1}[Hardware Error]:  Error 0, type: recoverable
	{1}[Hardware Error]:   section type: unknown, fbcd0a77-c260-417f-85a9-088b1621eba6
	{1}[Hardware Error]:   section length: 0x90
	{1}[Hardware Error]:   00000000: 00000090 00000007 00000000 0d938086 ................
	{1}[Hardware Error]:   00000010: 00100000 00000000 00040000 00000000 ................
	...

CXL events were rerouted though the CXL subsystem for additional
processing.  However, when that work was done it was missed that
cper_estatus_print_section() continued with a generic error message
which is confusing.

Teach CPER print code to ignore printing details of some section types.
Assign the CXL event GUIDs to this set to prevent confusing unknown
prints.

Reported-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Suggested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

Adding memblocks for soft-reserved regions prevents them from later being
hotplugged in by dax_kmem.

Signed-off-by: Andrew Bresticker <abrestic@rivosinc.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

md_size will have been narrowed if we have >= 4GB worth of pages in a
soft-reserved region.

Signed-off-by: Andrew Bresticker <abrestic@rivosinc.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

Add the description of @memory_type to silence the warning:
drivers/firmware/efi/libstub/alignedmem.c:27: warning: Function parameter or struct member 'memory_type' not described in 'efi_allocate_pages_aligned'

Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
[ardb: tweak comment]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

The EFI stub's kernel placement logic randomizes the physical placement
of the kernel by taking all available memory into account, and picking a
region at random, based on a random seed.

When KASLR is disabled, this seed is set to 0x0, and this results in the
lowest available region of memory to be selected for loading the kernel,
even if this is below LOAD_PHYSICAL_ADDR. Some of this memory is
typically reserved for the GFP_DMA region, to accommodate masters that
can only access the first 16 MiB of system memory.

Even if such devices are rare these days, we may still end up with a
warning in the kernel log, as reported by Tom:

 swapper/0: page allocation failure: order:10, mode:0xcc1(GFP_KERNEL|GFP_DMA), nodemask=(null),cpuset=/,mems_allowed=0

Fix this by tweaking the random allocation logic to accept a low bound
on the placement, and set it to LOAD_PHYSICAL_ADDR.

Fixes: a1b87d54f4e4 ("x86/efistub: Avoid legacy decompressor when doing EFI boot")
Reported-by: Tom Englund <tomenglund26@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218404
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

Pull drm fixes from Dave Airlie:
 "Lots going on for rc2, ivpu has a bunch of stabilisation and debugging
  work, then amdgpu and xe are the main fixes. i915, exynos have a few,
  then some misc panel and bridge fixes.

  Worth mentioning are three regressions. One of the nouveau fixes in
  6.7 for a serious deadlock had side effects, so I guess we will bring
  back the deadlock until I can figure out what should be done properly.
  There was a scheduler regression vs amdgpu which was reported in a few
  places and is now fixed. There was an i915 vs simpledrm problem
  resulting in black screens, that is reverted also.

  I'll be working on a proper nouveau fix, it kinda looks like one of
  those cases where someone tried to use an atomic where they should
  have probably used a lock, but I'll see.

  fb:
   - fix simpledrm/i915 regression by reverting change

  scheduler:
   - fix regression affecting amdgpu users due to sched draining

  nouveau:
   - revert 6.7 deadlock fix as it has side effects

  dp:
   - fix documentation warning

  ttm:
   - fix dummy page read on some platforms

  bridge:
   - anx7625 suspend fix
   - sii902x: fix probing and audio registration
   - parade-ps8640: fix suspend of bridge, aux fixes
   - samsung-dsim: avoid using FORCE_STOP_STATE

  panel:
   - simple add missing bus flags
   - fix samsung-s6d7aa0 flags

  amdgpu:
   - AC/DC power supply tracking fix
   - Don't show invalid vram vendor data
   - SMU 13.0.x fixes
   - GART fix for umr on systems without VRAM
   - GFX 10/11 UNORD_DISPATCH fixes
   - IPS display fixes (required for S0ix on some platforms)
   - Misc fixes

  i915:
   - DSI sequence revert to fix GitLab #10071 and DP test-pattern fix
   - Drop -Wstringop-overflow (broken on GCC11)

  ivpu:
   - fix recovery/reset support
   - improve submit ioctl stability
   - fix dev open/close races on unbind
   - PLL disable reset fix
   - deprecate context priority param
   - improve debug buffer logging
   - disable buffer sharing across VPU contexts
   - free buffer sgt on unbind
   - fix missing lock around shmem vmap
   - add better boot diagnostics
   - add more debug prints around mapping
   - dump MMU events in case of timeout

  v3d:
   - NULL ptr dereference fix

  exynos:
   - fix stack usage
   - fix incorrect type
   - fix dt typo
   - fix gsc runtime resume

  xe:
   - Make an ops struct static
   - Fix an implicit 0 to NULL conversion
   - A couple of 32-bit fixes
   - A migration coherency fix for Lunar Lake.
   - An error path vm id leak fix
   - Remove PVC references in kunit tests"

* tag 'drm-fixes-2024-01-27' of git://anongit.freedesktop.org/drm/drm: (66 commits)
  Revert "nouveau: push event block/allowing out of the fence context"
  drm: bridge: samsung-dsim: Don't use FORCE_STOP_STATE
  drm/sched: Drain all entities in DRM sched run job worker
  drm/amd/display: "Enable IPS by default"
  drm/amd: Add a DC debug mask for IPS
  drm/amd/display: Disable ips before dc interrupt setting
  drm/amd/display: Replay + IPS + ABM in Full Screen VPB
  drm/amd/display: Add IPS checks before dcn register access
  drm/amd/display: Add Replay IPS register for DMUB command table
  drm/amd/display: Allow IPS2 during Replay
  drm/amdgpu/gfx11: set UNORD_DISPATCH in compute MQDs
  drm/amdgpu/gfx10: set UNORD_DISPATCH in compute MQDs
  drm/amd/amdgpu: Assign GART pages to AMD device mapping
  drm/amd/pm: Fetch current power limit from FW
  drm/amdgpu: Fix null pointer dereference
  drm/amdgpu: Show vram vendor only if available
  drm/amd/pm: update the power cap setting
  drm/amdgpu: Avoid fetching vram vendor information
  drm/amdgpu/pm: Fix the power source flag error
  drm/amd/display: Fix uninitialized variable usage in core_link_ 'read_dpcd() & write_dpcd()' functions
  ...

The recently introduced EFI memory attributes protocol should be used
if it exists to ensure that the memory allocation created for the kernel
permits execution. This is needed for compatibility with tightened
requirements related to Windows logo certification for x86 PCs.

Currently, we simply strip the execute protect (XP) attribute from the
entire range, but this might be rejected under some firmware security
policies, and so in a subsequent patch, this will be changed to only
strip XP from the executable region that runs early, and make it
read-only (RO) as well.

In order to catch any issues early, ensure that the memory attribute
protocol works as intended, and give up if it produces spurious errors.

Note that the DXE services based fallback was always based on best
effort, so don't propagate any errors returned by that API.

Fixes: a1b87d54f4e4 ("x86/efistub: Avoid legacy decompressor when doing EFI boot")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

Arm FF-A fixes for v6.8

Quite a few fixes addressing issues around missing RW lock initialisation
in ffa_setup_partitions(), missing check for xa_load() return value,
use of xa_insert instead of xa_store to flag case of duplicate insertion.
It also simplifies ffa_partitions_cleanup() with xa_for_each() and xa_erase()
instead of xa_extract() and kfree(). Finally it includes fixes around
handling of partitions setup failures during initialisation.

* tag 'ffa-fixes-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
  firmware: arm_ffa: Handle partitions setup failures
  firmware: arm_ffa: Use xa_insert() and check for result
  firmware: arm_ffa: Simplify ffa_partitions_cleanup()
  firmware: arm_ffa: Check xa_load() return value
  firmware: arm_ffa: Add missing rwlock_init() for the driver partition
  firmware: arm_ffa: Add missing rwlock_init() in ffa_setup_partitions()

Link: https://lore.kernel.org/r/20240122161652.3551159-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

This reverts commit 60aebc9559492cea6a9625f514a8041717e3a2e4.

Commit 60aebc9559492cea ("drivers/firmware: Move sysfb_init() from
device_initcall to subsys_initcall_sync") messes up initialization order
of the graphics drivers and leads to blank displays on some systems. So
revert the commit.

To make the display drivers fully independent from initialization
order requires to track framebuffer memory by device and independently
from the loaded drivers. The kernel currently lacks the infrastructure
to do so.

Reported-by: Jaak Ristioja <jaak@ristioja.ee>
Closes: https://lore.kernel.org/dri-devel/ZUnNi3q3yB3zZfTl@P70.localdomain/T/#t
Reported-by: Huacai Chen <chenhuacai@loongson.cn>
Closes: https://lore.kernel.org/dri-devel/20231108024613.2898921-1-chenhuacai@loongson.cn/
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/10133
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Thorsten Leemhuis <regressions@leemhuis.info>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: stable@vger.kernel.org # v6.5+
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240123120937.27736-1-tzimmermann@suse.de