Pull ARM SoC fixes from Olof Johansson:
 "A few fixes that have trickled in through the merge window:

   - Video fixes for OMAP due to panel-dpi driver removal

   - Clock fixes for OMAP that broke no-idle quirks + nfsroot on DRA7

   - Fixing arch version on ASpeed ast2500

   - Two fixes for reset handling on ARM SCMI"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: aspeed: ast2500 is ARMv6K
  reset: reset-scmi: add missing handle initialisation
  firmware: arm_scmi: reset: fix reset_state assignment in scmi_domain_reset
  bus: ti-sysc: Remove unpaired sysc_clkdm_deny_idle()
  ARM: dts: logicpd-som-lv: Fix i2c2 and i2c3 Pin mux
  ARM: dts: am3517-evm: Fix missing video
  ARM: dts: logicpd-torpedo-baseboard: Fix missing video
  ARM: omap2plus_defconfig: Fix missing video
  bus: ti-sysc: Fix handling of invalid clocks
  bus: ti-sysc: Fix clock handling for no-idle quirks

ARM SCMI fixes for v5.4

Couple of fixes: one in scmi reset driver initialising missed scmi handle
and an other in scmi reset API implementation fixing the assignment of
reset state

* tag 'scmi-fixes-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
  reset: reset-scmi: add missing handle initialisation
  firmware: arm_scmi: reset: fix reset_state assignment in scmi_domain_reset

Link: https://lore.kernel.org/r/20190918142139.GA4370@bogus
Signed-off-by: Olof Johansson <olof@lixom.net>

Pull kernel lockdown mode from James Morris:
 "This is the latest iteration of the kernel lockdown patchset, from
  Matthew Garrett, David Howells and others.

  From the original description:

    This patchset introduces an optional kernel lockdown feature,
    intended to strengthen the boundary between UID 0 and the kernel.
    When enabled, various pieces of kernel functionality are restricted.
    Applications that rely on low-level access to either hardware or the
    kernel may cease working as a result - therefore this should not be
    enabled without appropriate evaluation beforehand.

    The majority of mainstream distributions have been carrying variants
    of this patchset for many years now, so there's value in providing a
    doesn't meet every distribution requirement, but gets us much closer
    to not requiring external patches.

  There are two major changes since this was last proposed for mainline:

   - Separating lockdown from EFI secure boot. Background discussion is
     covered here: https://lwn.net/Articles/751061/

   -  Implementation as an LSM, with a default stackable lockdown LSM
      module. This allows the lockdown feature to be policy-driven,
      rather than encoding an implicit policy within the mechanism.

  The new locked_down LSM hook is provided to allow LSMs to make a
  policy decision around whether kernel functionality that would allow
  tampering with or examining the runtime state of the kernel should be
  permitted.

  The included lockdown LSM provides an implementation with a simple
  policy intended for general purpose use. This policy provides a coarse
  level of granularity, controllable via the kernel command line:

    lockdown={integrity|confidentiality}

  Enable the kernel lockdown feature. If set to integrity, kernel features
  that allow userland to modify the running kernel are disabled. If set to
  confidentiality, kernel features that allow userland to extract
  confidential information from the kernel are also disabled.

  This may also be controlled via /sys/kernel/security/lockdown and
  overriden by kernel configuration.

  New or existing LSMs may implement finer-grained controls of the
  lockdown features. Refer to the lockdown_reason documentation in
  include/linux/security.h for details.

  The lockdown feature has had signficant design feedback and review
  across many subsystems. This code has been in linux-next for some
  weeks, with a few fixes applied along the way.

  Stephen Rothwell noted that commit 9d1f8be5cf42 ("bpf: Restrict bpf
  when kernel lockdown is in confidentiality mode") is missing a
  Signed-off-by from its author. Matthew responded that he is providing
  this under category (c) of the DCO"

* 'next-lockdown' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (31 commits)
  kexec: Fix file verification on S390
  security: constify some arrays in lockdown LSM
  lockdown: Print current->comm in restriction messages
  efi: Restrict efivar_ssdt_load when the kernel is locked down
  tracefs: Restrict tracefs when the kernel is locked down
  debugfs: Restrict debugfs when the kernel is locked down
  kexec: Allow kexec_file() with appropriate IMA policy when locked down
  lockdown: Lock down perf when in confidentiality mode
  bpf: Restrict bpf when kernel lockdown is in confidentiality mode
  lockdown: Lock down tracing and perf kprobes when in confidentiality mode
  lockdown: Lock down /proc/kcore
  x86/mmiotrace: Lock down the testmmiotrace module
  lockdown: Lock down module params that specify hardware parameters (eg. ioport)
  lockdown: Lock down TIOCSSERIAL
  lockdown: Prohibit PCMCIA CIS storage when the kernel is locked down
  acpi: Disable ACPI table override if the kernel is locked down
  acpi: Ignore acpi_rsdp kernel param when the kernel has been locked down
  ACPI: Limit access to custom_method when the kernel is locked down
  x86/msr: Restrict MSR access when the kernel is locked down
  x86: Lock down IO port access when the kernel is locked down
  ...

Commit feb4eb060c3a ("firmware: bcm47xx_nvram: Correct size_t printf
format") was wrong, and changed a printout of 'header.len' - which is an
u32 type - to use '%zu'.

It apparently did pattern matching on the other case, where it printed
out 'nvram_len', which is indeed of type 'size_t'.

Rather than undoing the change, this just makes it use the variable that
the change seemed to expect to be used.

Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: Paul Burton <paul.burton@mips.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull MIPS updates from Paul Burton:
 "Main MIPS changes:

   - boot_mem_map is removed, providing a nice cleanup made possible by
     the recent removal of bootmem.

   - Some fixes to atomics, in general providing compiler barriers for
     smp_mb__{before,after}_atomic plus fixes specific to Loongson CPUs
     or MIPS32 systems using cmpxchg64().

   - Conversion to the new generic VDSO infrastructure courtesy of
     Vincenzo Frascino.

   - Removal of undefined behavior in set_io_port_base(), fixing the
     behavior of some MIPS kernel configurations when built with recent
     clang versions.

   - Initial MIPS32 huge page support, functional on at least Ingenic
     SoCs.

   - pte_special() is now supported for some configurations, allowing
     among other things generic fast GUP to be used.

   - Miscellaneous fixes & cleanups.

  And platform specific changes:

   - Major improvements to Ingenic SoC support from Paul Cercueil,
     mostly enabled by the inclusion of the new TCU (timer-counter unit)
     drivers he's spent a very patient year or so working on. Plus some
     fixes for X1000 SoCs from Zhou Yanjie.

   - Netgear R6200 v1 systems are now supported by the bcm47xx platform.

   - DT updates for BMIPS, Lantiq & Microsemi Ocelot systems"

* tag 'mips_5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (89 commits)
  MIPS: Detect bad _PFN_SHIFT values
  MIPS: Disable pte_special() for MIPS32 with RiXi
  MIPS: ralink: deactivate PCI support for SOC_MT7621
  mips: compat: vdso: Use legacy syscalls as fallback
  MIPS: Drop Loongson _CACHE_* definitions
  MIPS: tlbex: Remove cpu_has_local_ebase
  MIPS: tlbex: Simplify r3k check
  MIPS: Select R3k-style TLB in Kconfig
  MIPS: PCI: refactor ioc3 special handling
  mips: remove ioremap_cachable
  mips/atomic: Fix smp_mb__{before,after}_atomic()
  mips/atomic: Fix loongson_llsc_mb() wreckage
  mips/atomic: Fix cmpxchg64 barriers
  MIPS: Octeon: remove duplicated include from dma-octeon.c
  firmware: bcm47xx_nvram: Allow COMPILE_TEST
  firmware: bcm47xx_nvram: Correct size_t printf format
  MIPS: Treat Loongson Extensions as ASEs
  MIPS: Remove dev_err() usage after platform_get_irq()
  MIPS: dts: mscc: describe the PTP ready interrupt
  MIPS: dts: mscc: describe the PTP register range
  ...

Pull char/misc driver updates from Greg KH:
 "Here is the big char/misc driver pull request for 5.4-rc1.

  As has been happening in previous releases, more and more individual
  driver subsystem trees are ending up in here. Now if that is good or
  bad I can't tell, but hopefully it makes your life easier as it's more
  of an aggregation of trees together to one merge point for you.

  Anyway, lots of stuff in here:
     - habanalabs driver updates
     - thunderbolt driver updates
     - misc driver updates
     - coresight and intel_th hwtracing driver updates
     - fpga driver updates
     - extcon driver updates
     - some dma driver updates
     - char driver updates
     - android binder driver updates
     - nvmem driver updates
     - phy driver updates
     - parport driver fixes
     - pcmcia driver fix
     - uio driver updates
     - w1 driver updates
     - configfs fixes
     - other assorted driver updates

  All of these have been in linux-next for a long time with no reported
  issues"

* tag 'char-misc-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (200 commits)
  misc: mic: Use PTR_ERR_OR_ZERO rather than its implementation
  habanalabs: correctly cast variable to __le32
  habanalabs: show correct id in error print
  habanalabs: stop using the acronym KMD
  habanalabs: display card name as sensors header
  habanalabs: add uapi to retrieve aggregate H/W events
  habanalabs: add uapi to retrieve device utilization
  habanalabs: Make the Coresight timestamp perpetual
  habanalabs: explicitly set the queue-id enumerated numbers
  habanalabs: print to kernel log when reset is finished
  habanalabs: replace __le32_to_cpu with le32_to_cpu
  habanalabs: replace __cpu_to_le32/64 with cpu_to_le32/64
  habanalabs: Handle HW_IP_INFO if device disabled or in reset
  habanalabs: Expose devices after initialization is done
  habanalabs: improve security in Debug IOCTL
  habanalabs: use default structure for user input in Debug IOCTL
  habanalabs: Add descriptive name to PSOC app status register
  habanalabs: Add descriptive names to PSOC scratch-pad registers
  habanalabs: create two char devices per ASIC
  habanalabs: change device_setup_cdev() to be more generic
  ...

Pull driver core updates from Greg Kroah-Hartman:
 "Here is the big driver core update for 5.4-rc1.

  There was a bit of a churn in here, with a number of core and OF
  platform patches being added to the tree, and then after much
  discussion and review and a day-long in-person meeting, they were
  decided to be reverted and a new set of patches is currently being
  reviewed on the mailing list.

  Other than that churn, there are two "persistent" branches in here
  that other trees will be pulling in as well during the merge window.
  One branch to add support for drivers to have the driver core
  automatically add sysfs attribute files when a driver is bound to a
  device so that the driver doesn't have to manually do it (and then
  clean it up, as it always gets it wrong).

  There's another branch in here for generic lookup helpers for the
  driver core that lots of busses are starting to use. That's the
  majority of the non-driver-core changes in this patch series.

  There's also some on-going debugfs file creation cleanup that has been
  slowly happening over the past few releases, with the goal to
  hopefully get that done sometime next year.

  All of these have been in linux-next for a while now with no reported
  issues"

[ Note that the above-mentioned generic lookup helpers branch was
  already brought in by the LED merge (commit 4feaab05dc1e) that had
  shared it.

  Also note that that common branch introduced an i2c bug due to a bad
  conversion, which got fixed here. - Linus ]

* tag 'driver-core-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (49 commits)
  coccinelle: platform_get_irq: Fix parse error
  driver-core: add include guard to linux/container.h
  sysfs: add BIN_ATTR_WO() macro
  driver core: platform: Export platform_get_irq_optional()
  hwmon: pwm-fan: Use platform_get_irq_optional()
  driver core: platform: Introduce platform_get_irq_optional()
  Revert "driver core: Add support for linking devices during device addition"
  Revert "driver core: Add edit_links() callback for drivers"
  Revert "of/platform: Add functional dependency link from DT bindings"
  Revert "driver core: Add sync_state driver/bus callback"
  Revert "of/platform: Pause/resume sync state during init and of_platform_populate()"
  Revert "of/platform: Create device links for all child-supplier depencencies"
  Revert "of/platform: Don't create device links for default busses"
  Revert "of/platform: Fix fn definitons for of_link_is_valid() and of_link_property()"
  Revert "of/platform: Fix device_links_supplier_sync_state_resume() warning"
  Revert "of/platform: Disable generic device linking code for PowerPC"
  devcoredump: fix typo in comment
  devcoredump: use memory_read_from_buffer
  of/platform: Disable generic device linking code for PowerPC
  device.h: Fix warnings for mismatched parameter names in comments
  ...

Fix the copy paste typo that incorrectly assigns domain_id with the
passed 'state' parameter instead of reset_state.

Fixes: 95a15d80aa0d ("firmware: arm_scmi: Add RESET protocol in SCMI v2.0")
Reported-by: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

Pull EFI updates from Ingo Molnar:

 - refactor the EFI config table handling across architectures

 - add support for the Dell EMC OEM config table

 - include AER diagnostic output to CPER handling of fatal PCIe errors

* 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efi: cper: print AER info of PCIe fatal error
  efi: Export Runtime Configuration Interface table to sysfs
  efi: ia64: move SAL systab handling out of generic EFI code
  efi/x86: move UV_SYSTAB handling into arch/x86
  efi: x86: move efi_is_table_address() into arch/x86

Pull ARM SoC driver updates from Arnd Bergmann:
 "This contains driver changes that are tightly connected to SoC
  specific code. Aside from smaller cleanups and bug fixes, here is a
  list of the notable changes.

  New device drivers:

   - The Turris Mox router has a new "moxtet" bus driver for its
     on-board pluggable extension bus. The same platform also gains a
     firmware driver.

   - The Samsung Exynos family gains a new Chipid driver exporting using
     the soc device sysfs interface

   - A similar socinfo driver for Qualcomm Snapdragon chips.

   - A firmware driver for the NXP i.MX DSP IPC protocol using shared
     memory and a mailbox

  Other changes:

   - The i.MX reset controller driver now supports the NXP i.MX8MM chip

   - Amlogic SoC specific drivers gain support for the S905X3 and A311D
     chips

   - A rework of the TI Davinci framebuffer driver to allow important
     cleanups in the platform code

   - A couple of device drivers for removed ARM SoC platforms are
     removed. Most of the removals were picked up by other maintainers,
     this contains whatever was left"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (123 commits)
  bus: uniphier-system-bus: use devm_platform_ioremap_resource()
  soc: ti: ti_sci_pm_domains: Add support for exclusive and shared access
  dt-bindings: ti_sci_pm_domains: Add support for exclusive and shared access
  firmware: ti_sci: Allow for device shared and exclusive requests
  bus: imx-weim: remove incorrect __init annotations
  fbdev: remove w90x900/nuc900 platform drivers
  spi: remove w90x900 driver
  net: remove w90p910-ether driver
  net: remove ks8695 driver
  firmware: turris-mox-rwtm: Add sysfs documentation
  firmware: Add Turris Mox rWTM firmware driver
  dt-bindings: firmware: Document cznic,turris-mox-rwtm binding
  bus: moxtet: fix unsigned comparison to less than zero
  bus: moxtet: remove set but not used variable 'dummy'
  ARM: scoop: Use the right include
  dt-bindings: power: add Amlogic Everything-Else power domains bindings
  soc: amlogic: Add support for Everything-Else power domains controller
  fbdev: da8xx: use resource management for dma
  fbdev: da8xx-fb: drop a redundant if
  fbdev: da8xx-fb: use devm_platform_ioremap_resource()
  ...