linux.git/drivers/firmware, branch v5.16-rc4

firmware: smccc: Fix check for ARCH_SOC_ID not implemented

2021-11-22T10:42:59+00:00

The ARCH_FEATURES function ID is a 32-bit SMC call, which returns
a 32-bit result per the SMCCC spec.  Current code is doing a 64-bit
comparison against -1 (SMCCC_RET_NOT_SUPPORTED) to detect that the
feature is unimplemented.  That check doesn't work in a Hyper-V VM,
where the upper 32-bits are zero as allowed by the spec.

Cast the result as an 'int' so the comparison works. The change also
makes the code consistent with other similar checks in this file.

Fixes: 821b67fa4639 ("firmware: smccc: Add ARCH_SOC_ID support")
Signed-off-by: Michael Kelley 
Reviewed-by: Sudeep Holla 
Signed-off-by: Arnd Bergmann

firmware: arm_scmi: Fix type error assignment in voltage protocol

2021-11-17T11:24:50+00:00

Fix incorrect type assignment error reported by sparse as:

drivers/firmware/arm_scmi/voltage.c:159:42: warning: incorrect type in assignment (different base types)
drivers/firmware/arm_scmi/voltage.c:159:42: expected restricted __le32 [usertype] level_index
drivers/firmware/arm_scmi/voltage.c:159:42: got unsigned int [usertype] desc_index

Link: https://lore.kernel.org/r/20211115154043.49284-1-cristian.marussi@arm.com
Fixes: 2add5cacff353 ("firmware: arm_scmi: Add voltage domain management protocol support")
Reported-by: kernel test robot 
Signed-off-by: Cristian Marussi 
Signed-off-by: Sudeep Holla

firmware: arm_scmi: Fix type error in sensor protocol

2021-11-17T11:24:50+00:00

Fix incorrect type error reported by sparse as:

drivers/firmware/arm_scmi/sensors.c:640:28: warning: incorrect type in argument 1 (different base types)
drivers/firmware/arm_scmi/sensors.c:640:28: expected unsigned int [usertype] val
drivers/firmware/arm_scmi/sensors.c:640:28: got restricted __le32 [usertype]

Link: https://lore.kernel.org/r/20211115154043.49284-2-cristian.marussi@arm.com
Fixes: 7b83c5f410889 ("firmware: arm_scmi: Add SCMI v3.0 sensor configuration support")
Signed-off-by: Cristian Marussi 
Signed-off-by: Sudeep Holla

firmware: arm_scmi: pm: Propagate return value to caller

2021-11-17T11:24:50+00:00

of_genpd_add_provider_onecell may return error, so let's propagate
its return value to caller

Link: https://lore.kernel.org/r/20211116064227.20571-1-peng.fan@oss.nxp.com
Fixes: 898216c97ed2 ("firmware: arm_scmi: add device power domain support using genpd")
Signed-off-by: Peng Fan 
Signed-off-by: Sudeep Holla

firmware: arm_scmi: Fix base agent discover response

2021-11-17T11:24:50+00:00

According to scmi specification, the response of the discover agent request
is made of:
- int32 status
- uint32 agent_id
- uint8 name[16]

but the current implementation doesn't take into account the agent_id field
and only allocates a rx buffer of SCMI_MAX_STR_SIZE length

Allocate the correct length for rx buffer and copy the name from the
correct offset in the response.

While no error were returned until v5.15, v5.16-rc1 fails with virtio_scmi
transport channel:

 | arm-scmi firmware:scmi0: SCMI Notifications - Core Enabled.
 | arm-scmi firmware:scmi0: SCMI Protocol v2.0 'Linaro:PMWG' Firmware version 0x2090000
 | scmi-virtio virtio0: tx:used len 28 is larger than in buflen 24

Link: https://lore.kernel.org/r/20211117081856.9932-1-vincent.guittot@linaro.org
Fixes: b6f20ff8bd94 ("firmware: arm_scmi: add common infrastructure and support for base protocol")
Tested-by: Cristian Marussi 
Reviewed-by: Cristian Marussi 
Signed-off-by: Vincent Guittot 
Signed-off-by: Sudeep Holla

firmware: arm_scmi: Fix null de-reference on error path

2021-11-15T10:58:42+00:00

During channel setup a failure in the call of scmi_vio_feed_vq_rx() leads
to an attempt to access a dev pointer by dereferencing vioch->cinfo at
a time when vioch->cinfo has still to be initialized.

Fix it by providing the device reference directly to scmi_vio_feed_vq_rx.

Link: https://lore.kernel.org/r/20211112180705.41601-1-cristian.marussi@arm.com
Fixes: 46abe13b5e3db ("firmware: arm_scmi: Add virtio transport")
Signed-off-by: Cristian Marussi 
Signed-off-by: Sudeep Holla

Merge branch 'exit-cleanups-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace

2021-11-11T00:15:54+00:00

Pull exit cleanups from Eric Biederman:
 "While looking at some issues related to the exit path in the kernel I
  found several instances where the code is not using the existing
  abstractions properly.

  This set of changes introduces force_fatal_sig a way of sending a
  signal and not allowing it to be caught, and corrects the misuse of
  the existing abstractions that I found.

  A lot of the misuse of the existing abstractions are silly things such
  as doing something after calling a no return function, rolling BUG by
  hand, doing more work than necessary to terminate a kernel thread, or
  calling do_exit(SIGKILL) instead of calling force_sig(SIGKILL).

  In the review a deficiency in force_fatal_sig and force_sig_seccomp
  where ptrace or sigaction could prevent the delivery of the signal was
  found. I have added a change that adds SA_IMMUTABLE to change that
  makes it impossible to interrupt the delivery of those signals, and
  allows backporting to fix force_sig_seccomp

  And Arnd found an issue where a function passed to kthread_run had the
  wrong prototype, and after my cleanup was failing to build."

* 'exit-cleanups-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (23 commits)
  soc: ti: fix wkup_m3_rproc_boot_thread return type
  signal: Add SA_IMMUTABLE to ensure forced siganls do not get changed
  signal: Replace force_sigsegv(SIGSEGV) with force_fatal_sig(SIGSEGV)
  exit/r8188eu: Replace the macro thread_exit with a simple return 0
  exit/rtl8712: Replace the macro thread_exit with a simple return 0
  exit/rtl8723bs: Replace the macro thread_exit with a simple return 0
  signal/x86: In emulate_vsyscall force a signal instead of calling do_exit
  signal/sparc32: In setup_rt_frame and setup_fram use force_fatal_sig
  signal/sparc32: Exit with a fatal signal when try_to_clear_window_buffer fails
  exit/syscall_user_dispatch: Send ordinary signals on failure
  signal: Implement force_fatal_sig
  exit/kthread: Have kernel threads return instead of calling do_exit
  signal/s390: Use force_sigsegv in default_trap_handler
  signal/vm86_32: Properly send SIGSEGV when the vm86 state cannot be saved.
  signal/vm86_32: Replace open coded BUG_ON with an actual BUG_ON
  signal/sparc: In setup_tsb_params convert open coded BUG into BUG
  signal/powerpc: On swapcontext failure force SIGSEGV
  signal/sh: Use force_sig(SIGKILL) instead of do_group_exit(SIGKILL)
  signal/mips: Update (_save|_restore)_fp_context to fail with -EFAULT
  signal/sparc32: Remove unreachable do_exit in do_sparc_fault
  ...

Merge tag 'gpio-updates-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux

2021-11-08T19:55:21+00:00

Pull gpio updates from Bartosz Golaszewski:
 "We have a single new driver, new features in others and some cleanups
  all over the place.

  Nothing really stands out and it is all relatively small.

   - new driver: gpio-modepin (plus relevant change in zynqmp firmware)

   - add interrupt support to gpio-virtio

   - enable the 'gpio-line-names' property in the DT bindings for
     gpio-rockchip

   - use the subsystem helpers where applicable in gpio-uniphier instead
     of accessing IRQ structures directly

   - code shrink in gpio-xilinx

   - add interrupt to gpio-mlxbf2 (and include the removal of custom
     interrupt code from the mellanox ethernet driver)

   - support multiple interrupts per bank in gpio-tegra186 (and force
     one interrupt per bank in older models)

   - fix GPIO line IRQ offset calculation in gpio-realtek-otto

   - drop unneeded MODULE_ALIAS expansions in multiple drivers

   - code cleanup in gpio-aggregator

   - minor improvements in gpio-max730x and gpio-mc33880

   - Kconfig cleanups"

* tag 'gpio-updates-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  virtio_gpio: drop packed attribute
  gpio: virtio: Add IRQ support
  gpio: realtek-otto: fix GPIO line IRQ offset
  gpio: clean up Kconfig file
  net: mellanox: mlxbf_gige: Replace non-standard interrupt handling
  gpio: mlxbf2: Introduce IRQ support
  gpio: mc33880: Drop if with an always false condition
  gpio: max730x: Make __max730x_remove() return void
  gpio: aggregator: Wrap access to gpiochip_fwd.tmp[]
  gpio: modepin: Add driver support for modepin GPIO controller
  dt-bindings: gpio: zynqmp: Add binding documentation for modepin
  firmware: zynqmp: Add MMIO read and write support for PS_MODE pin
  gpio: tps65218: drop unneeded MODULE_ALIAS
  gpio: max77620: drop unneeded MODULE_ALIAS
  gpio: xilinx: simplify getting .driver_data
  gpio: tegra186: Support multiple interrupts per bank
  gpio: tegra186: Force one interrupt per bank
  gpio: uniphier: Use helper functions to get private data from IRQ data
  gpio: uniphier: Use helper function to get IRQ hardware number
  dt-bindings: gpio: add gpio-line-names to rockchip,gpio-bank.yaml

Merge branch 'akpm' (patches from Andrew)

2021-11-06T21:08:17+00:00

Merge misc updates from Andrew Morton:
 "257 patches.

  Subsystems affected by this patch series: scripts, ocfs2, vfs, and
  mm (slab-generic, slab, slub, kconfig, dax, kasan, debug, pagecache,
  gup, swap, memcg, pagemap, mprotect, mremap, iomap, tracing, vmalloc,
  pagealloc, memory-failure, hugetlb, userfaultfd, vmscan, tools,
  memblock, oom-kill, hugetlbfs, migration, thp, readahead, nommu, ksm,
  vmstat, madvise, memory-hotplug, rmap, zsmalloc, highmem, zram,
  cleanups, kfence, and damon)"

* emailed patches from Andrew Morton : (257 commits)
  mm/damon: remove return value from before_terminate callback
  mm/damon: fix a few spelling mistakes in comments and a pr_debug message
  mm/damon: simplify stop mechanism
  Docs/admin-guide/mm/pagemap: wordsmith page flags descriptions
  Docs/admin-guide/mm/damon/start: simplify the content
  Docs/admin-guide/mm/damon/start: fix a wrong link
  Docs/admin-guide/mm/damon/start: fix wrong example commands
  mm/damon/dbgfs: add adaptive_targets list check before enable monitor_on
  mm/damon: remove unnecessary variable initialization
  Documentation/admin-guide/mm/damon: add a document for DAMON_RECLAIM
  mm/damon: introduce DAMON-based Reclamation (DAMON_RECLAIM)
  selftests/damon: support watermarks
  mm/damon/dbgfs: support watermarks
  mm/damon/schemes: activate schemes based on a watermarks mechanism
  tools/selftests/damon: update for regions prioritization of schemes
  mm/damon/dbgfs: support prioritization weights
  mm/damon/vaddr,paddr: support pageout prioritization
  mm/damon/schemes: prioritize regions within the quotas
  mm/damon/selftests: support schemes quotas
  mm/damon/dbgfs: support quotas of schemes
  ...

memblock: rename memblock_free to memblock_phys_free

2021-11-06T20:30:41+00:00

Since memblock_free() operates on a physical range, make its name
reflect it and rename it to memblock_phys_free(), so it will be a
logical counterpart to memblock_phys_alloc().

The callers are updated with the below semantic patch:

    @@
    expression addr;
    expression size;
    @@
    - memblock_free(addr, size);
    + memblock_phys_free(addr, size);

Link: https://lkml.kernel.org/r/20210930185031.18648-6-rppt@kernel.org
Signed-off-by: Mike Rapoport 
Cc: Christophe Leroy 
Cc: Juergen Gross 
Cc: Shahab Vahedi 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds