The i.MX95 System manager exports SCMI CPU protocol for linux to manage
cpu cores. The driver is to use the cpu Protocol interface to
start, stop a cpu cores (eg, M7).

Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Message-Id: <20250408-imx-lmm-cpu-v4-6-4c5f4a456e49@nxp.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

The i.MX95 System manager exports SCMI LMM protocol for linux to manage
Logical Machines. The driver is to use the LMM Protocol interface to
boot, shutdown a LM.

Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Message-Id: <20250408-imx-lmm-cpu-v4-5-4c5f4a456e49@nxp.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

i.MX fixes for 6.14:

- A tqma8mpql board fix from Alexander Stein to correct vqmmc-supply for
  usdhc3
- A change from Joe Hattori to fix OF node leak in imx-scu driver probe
- A soc-imx8m driver fix from Peng Fan unregister cpufreq and soc device
  in cleanup path
- A couple of changes from Stefan Eichenberger to fix iMX6 Apalis
  poweroff and iMX8M verdin-dahlia sound-card descriptions

* tag 'imx-fixes-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  arm64: dts: freescale: imx8mm-verdin-dahlia: add Microphone Jack to sound card
  arm64: dts: freescale: imx8mp-verdin-dahlia: add Microphone Jack to sound card
  soc: imx8m: Unregister cpufreq and soc dev in cleanup path
  ARM: dts: imx6qdl-apalis: Fix poweroff on Apalis iMX6
  arm64: dts: freescale: tqma8mpql: Fix vqmmc-supply
  firmware: imx-scu: fix OF node leak in .probe()

Link: https://lore.kernel.org/r/Z8A+rihFV4K3l8QR@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

imx_scu_probe() calls of_parse_phandle_with_args(), but does not
release the OF node reference obtained by it. Add a of_node_put() call
after done with the node.

Fixes: f25a066d1a07 ("firmware: imx-scu: Support one TX and one RX")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

The i.MX System Controller Management Interface firmware is only present
on Freescale i.MX SoCs.  Hence add a dependency on ARCH_MXC, to prevent
asking the user about this driver when configuring a kernel without
Freescale i.MX platform support.

Fixes: 514b2262ade48a05 ("firmware: arm_scmi: Fix i.MX build dependency")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The newly added SCMI vendor driver references functions in the
protocol driver but needs a Kconfig dependency to ensure it can link,
essentially the Kconfig dependency needs to be reversed to match the
link time dependency:

  |  arm-linux-gnueabi-ld: sound/soc/fsl/fsl_mqs.o: in function `fsl_mqs_sm_write':
  |  	fsl_mqs.c:(.text+0x1aa): undefined reference to `scmi_imx_misc_ctrl_set'
  |  arm-linux-gnueabi-ld: sound/soc/fsl/fsl_mqs.o: in function `fsl_mqs_sm_read':
  |  	fsl_mqs.c:(.text+0x1ee): undefined reference to `scmi_imx_misc_ctrl_get'

This however only works after changing the dependency in the SND_SOC_FSL_MQS
driver as well, which uses 'select IMX_SCMI_MISC_DRV' to turn on a
driver it depends on. This is generally a bad idea, so the best solution
is to change that into a dependency.

To allow the ASoC driver to keep building with the SCMI support, this
needs to be an optional dependency that enforces the link-time
dependency if IMX_SCMI_MISC_DRV is a loadable module but not
depend on it if that is disabled.

Fixes: 61c9f03e22fc ("firmware: arm_scmi: Add initial support for i.MX MISC protocol")
Fixes: 101c9023594a ("ASoC: fsl_mqs: Support accessing registers by scmi interface")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Message-Id: <20241115230555.2435004-1-arnd@kernel.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

After commit 0edb555a65d1 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.

Convert all platform drivers below drivers/firmware to use .remove(),
with the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/36974feb6035201d53384557259ec72fe311053b.1731397962.git.u.kleine-koenig@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The i.MX95 System manager exports SCMI MISC protocol for linux to do
various settings, such as set board gpio expander as wakeup source.

The driver is to add the support.

Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Message-Id: <20240823-imx95-bbm-misc-v2-v8-5-e600ed9e9271@nxp.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/f4cc1ffe30b837d5eab96f2924f51999dfa9f671.1703693980.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull pmdomain updates from Ulf Hansson:

 - Move Kconfig files into the pmdomain subsystem

 - Drop use of genpd's redundant ->opp_to_performance_state() callback

 - amlogic:
    - Add support for the T7 power-domains controller
    - Fix mask for the second NNA mem power-domain

 - bcm: Fixup ASB register read and comparison for bcm2835-power

 - imx: Fix device link problem for consumers of the pgc power-domain

 - mediatek: Add support for the MT8365 power domains

 - qcom:
    - Add support for the rpmhpds for SC8380XP power-domains
    - Add support for the rpmhpds for SM8650 power-domains
    - Add support for the rpmhpd clocks for SM7150
    - Add support for the rpmpds for MSM8917 (families) power-domains

 - starfive: Add support for the JH7110 AON PMU

* tag 'pmdomain-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (56 commits)
  pmdomain: amlogic: Fix mask for the second NNA mem PD domain
  pmdomain: qcom: rpmhpd: Add SC8380XP power domains
  pmdomain: qcom: rpmhpd: Add SM8650 RPMh Power Domains
  dt-bindings: power: rpmpd: Add SC8380XP support
  dt-bindings: power: qcom,rpmhpd: Add GMXC PD index
  dt-bindings: power: qcom,rpmpd: document the SM8650 RPMh Power Domains
  pmdomain: imx: Make imx pgc power domain also set the fwnode
  pmdomain: qcom: rpmpd: Add QM215 power domains
  pmdomain: qcom: rpmpd: Add MSM8917 power domains
  dt-bindings: power: rpmpd: Add MSM8917, MSM8937 and QM215
  pmdomain: bcm: bcm2835-power: check if the ASB register is equal to enable
  pmdomain: qcom: rpmhpd: Drop the ->opp_to_performance_state() callback
  pmdomain: qcom: rpmpd: Drop the ->opp_to_performance_state() callback
  pmdomain: qcom: cpr: Drop the ->opp_to_performance_state() callback
  pmdomain: Use device_get_match_data()
  pmdomain: ti: add missing of_node_put
  pmdomain: mediatek: Add support for MT8365
  pmdomain: mediatek: Add support for MTK_SCPD_STRICT_BUS_PROTECTION cap
  pmdomain: mediatek: Add support for WAY_EN operations
  pmdomain: mediatek: Unify configuration for infracfg and smi
  ...