linux.git/drivers/firmware/dmi_scan.c, branch v4.1

firmware: dmi_scan: Fix ordering of product_uuid

2015-05-14T12:40:50+00:00

In function dmi_present(), dmi_walk_early() calls dmi_table(), which
calls dmi_decode(), which ultimately calls dmi_save_uuid(). This last
function makes a decision based on the value of global variable
dmi_ver. The problem is that this variable is set right _after_
dmi_walk_early() returns. So dmi_save_uuid() always sees dmi_ver == 0
regardless of the actual version implemented.

This causes /sys/class/dmi/id/product_uuid to always use the old
ordering even on systems implementing DMI/SMBIOS 2.6 or later, which
should use the new ordering.

This is broken since kernel v3.8 for legacy DMI implementations and
since kernel v3.10 for SMBIOS 2 implementations. SMBIOS 3
implementations with the 64-bit entry point are not affected.

The first breakage does not matter much as in practice legacy DMI
implementations are always for versions older than 2.6, which is when
the UUID ordering changed. The second breakage is more problematic as
it affects the vast majority of x86 systems manufactured since 2009.

Signed-off-by: Jean Delvare 
Fixes: 9f9c9cbb6057 ("drivers/firmware/dmi_scan.c: fetch dmi version from SMBIOS if it exists")
Fixes: 79bae42d51a5 ("dmi_scan: refactor dmi_scan_machine(), {smbios,dmi}_present()")
Acked-by: Zhenzhong Duan 
Cc: Ben Hutchings 
Cc: Artem Savkov 
Cc: Ivan Khoronzhuk 
Cc: Matt Fleming 
Cc: stable@vger.kernel.org [v3.10+]

firmware: dmi_scan: Simplified displayed version

2015-05-14T12:40:50+00:00

The trailing .x adds no information for the reader, and if anyone
tries to parse that line, this is more work as they have 3 different
formats to handle instead of 2. Plus, this makes backporting fixes
harder.

Signed-off-by: Jean Delvare 
Fixes: 95be58df74a5 ("firmware: dmi_scan: Use full dmi version for SMBIOS3")
Cc: Ivan Khoronzhuk

Merge branch 'core-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2015-04-13T17:22:30+00:00

Pull EFI update from Ingo Molnar:
 "This tree includes various fixes, cleanups, a new efi=debug boot
  option and EFI boot stub memory allocation optimizations"

* 'core-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efi/libstub: Retrieve FDT size when loaded from UEFI config table
  efi: Clean up the efi_call_phys_[prolog|epilog]() save/restore interaction
  efi: Disable interrupts around EFI calls, not in the epilog/prolog calls
  x86/efi: Add a "debug" option to the efi= cmdline
  firmware: dmi_scan: Use direct access to static vars
  firmware: dmi_scan: Use full dmi version for SMBIOS3

firmware: dmi_scan: Prevent dmi_num integer overflow

2015-03-27T10:53:46+00:00

dmi_num is a u16, dmi_len is a u32, so this construct:

	dmi_num = dmi_len / 4;

would result in an integer overflow for a DMI table larger than
256 kB. I've never see such a large table so far, but SMBIOS 3.0
makes it possible so maybe we'll see such tables in the future.

So instead of faking a structure count when the entry point does
not provide it, adjust the loop condition in dmi_table() to properly
deal with the case where dmi_num is not set.

This bug was introduced with the initial SMBIOS 3.0 support in commit
fc43026278b2 ("dmi: add support for SMBIOS 3.0 64-bit entry point").

Signed-off-by: Jean Delvare 
Cc: Matt Fleming 
Cc: Ivan Khoronzhuk 
Cc: 
Acked-by: Ard Biesheuvel 
Signed-off-by: Matt Fleming

firmware: dmi_scan: Use direct access to static vars

2015-03-26T14:00:15+00:00

There is no reason to pass static vars to function that can use
only them.

The dmi_table() can use only dmi_len and dmi_num static vars, so use
them directly. In this case we can freely change their type in one
place and slightly decrease redundancy.

Signed-off-by: Ivan Khoronzhuk 
Signed-off-by: Matt Fleming

firmware: dmi_scan: Use full dmi version for SMBIOS3

2015-03-26T13:48:15+00:00

New SMBIOS3 spec adds additional field for versioning - docrev.
The docrev identifies the revision of a specification implemented in
the table structures, so display SMBIOSv3 versions in format,
like "3.22.1".

In case of only 32 bit entry point for versions > 3 display
dmi version like "3.22.x" as we don't know the docrev.

In other cases display version like it was.

Signed-off-by: Ivan Khoronzhuk 
Signed-off-by: Matt Fleming

firmware: dmi_scan: Fix dmi_len type

2015-02-24T18:54:17+00:00

According to SMBIOSv3 specification the length of DMI table can be
up to 32bits wide. So use appropriate type to avoid overflow.

It's obvious that dmi_num theoretically can be more than u16 also,
so it's can be changed to u32 or at least it's better to use int
instead of u16, but on that moment I cannot imagine dmi structure
count more than 65535 and it can require changing type of vars that
work with it. So I didn't correct it.

Acked-by: Ard Biesheuvel 
Signed-off-by: Ivan Khoronzhuk 
Cc: 
Signed-off-by: Matt Fleming

firmware: dmi_scan: Fix dmi scan to handle "End of Table" structure

2015-02-18T14:47:30+00:00

The dmi-sysfs should create "End of Table" entry, that is type 127. But
after adding initial SMBIOS v3 support fc43026278b2 ("dmi: add support
for SMBIOS 3.0 64-bit entry point") the 127-0 entry is not handled any
more, as result it's not created in dmi sysfs for instance. This is
important because the size of whole DMI table must correspond to sum of
all DMI entry sizes.

So move the end-of-table check after it's handled by dmi_table.

Reviewed-by: Ard Biesheuvel 
Signed-off-by: Ivan Khoronzhuk 
Cc:  # v3.19
Signed-off-by: Matt Fleming

dmi: add support for SMBIOS 3.0 64-bit entry point

2014-11-05T08:03:19+00:00

The DMTF SMBIOS reference spec v3.0.0 defines a new 64-bit entry point,
which enables support for SMBIOS structure tables residing at a physical
offset over 4 GB. This is especially important for upcoming arm64
platforms whose system RAM resides entirely above the 4 GB boundary.

For the UEFI case, this code attempts to detect the new SMBIOS 3.0
header magic at the offset passed in the SMBIOS3_TABLE_GUID UEFI
configuration table. If this configuration table is not provided, or
if we fail to parse the header, we fall back to using the legacy
SMBIOS_TABLE_GUID configuration table. This is in line with the spec,
that allows both configuration tables to be provided, but mandates that
they must point to the same structure table, unless the version pointed
to by the 64-bit entry point is a superset of the 32-bit one.

For the non-UEFI case, the detection logic is modified to look for the
SMBIOS 3.0 header magic before it looks for the legacy header magic.

Note that this patch is based on version 3.0.0d [draft] of the
specification, which is expected not to deviate from the final version
in ways that would affect the correctness of this implementation.

Tested-by: Suravee Suthikulpanit 
Acked-by: Leif Lindholm 
Tested-by: Leif Lindholm 
Cc: Andrew Morton 
Cc: Tony Luck 
Acked-by: Matt Fleming 
Signed-off-by: Ard Biesheuvel

firmware/dmi_scan: generalize for use by other archs

2014-01-24T00:36:57+00:00

This patch makes a couple of changes to the SMBIOS/DMI scanning
code so it can be used on other archs (such as ARM and arm64):
(a) wrap the calls to ioremap()/iounmap(), this allows the use of a
    flavor of ioremap() more suitable for random unaligned access;
(b) allow the non-EFI fallback probe into hardcoded physical address
    0xF0000 to be disabled.

Signed-off-by: Ard Biesheuvel 
Acked-by: Grant Likely 
Cc: Ingo Molnar 
Cc "Luck, Tony" 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds