Rollback currently supported SCMI clock protocol version to v2.0 since
some of the mandatory v3.0 features are indeed still not supported yet.

Fixes: b5efc28a754d ("firmware: arm_scmi: Add protocol versioning checks")
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20240109181716.2338636-1-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

The clock protocol version as per the SCMI v3.2 specification is 0x30000.
Enable the v3.0 clock protocol features only when clock protocol version
equals 0x30000.

The previous beta version of the spec had this value set to 0x20001 and
th same value trickled down from the initial development. The version
update were missed in the driver.

Fixes: e49e314a2cf7 ("firmware: arm_scmi: Add clock v3.2 CONFIG_SET support")
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20240109150106.2066739-1-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

Use xa_insert() when saving per-channel raw queues to better check for
duplicates.

Fixes: 7860701d1e6e ("firmware: arm_scmi: Add per-channel raw injection support")
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20240108185050.1628687-2-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

When storing opps by level or index use xa_insert() instead of xa_store()
and add error-checking to spot bad duplicates indexes possibly wrongly
provided by the platform firmware.

Fixes: 31c7c1397a33 ("firmware: arm_scmi: Add v3.2 perf level indexing mode support")
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20240108185050.1628687-1-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

linux/bug.h includes asm-generic/bug.h already and hence replacing
asm-generic/bug.h with linux/bug.h will not regress any build.
Also, it is always better to avoid header file inclusion from asm-generic
if possible.

Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Tanzir Hasan <tanzirh@google.com>
Link: https://lore.kernel.org/r/20231226-shmem-v1-1-ea15ce81d8ba@google.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

On reception of a completion interrupt the shared memory area is accessed
to retrieve the message header at first and then, if the message sequence
number identifies a transaction which is still pending, the related
payload is fetched too.

When an SCMI command times out the channel ownership remains with the
platform until eventually a late reply is received and, as a consequence,
any further transmission attempt remains pending, waiting for the channel
to be relinquished by the platform.

Once that late reply is received the channel ownership is given back
to the agent and any pending request is then allowed to proceed and
overwrite the SMT area of the just delivered late reply; then the wait
for the reply to the new request starts.

It has been observed that the spurious IRQ related to the late reply can
be wrongly associated with the freshly enqueued request: when that happens
the SCMI stack in-flight lookup procedure is fooled by the fact that the
message header now present in the SMT area is related to the new pending
transaction, even though the real reply has still to arrive.

This race-condition on the A2P channel can be detected by looking at the
channel status bits: a genuine reply from the platform will have set the
channel free bit before triggering the completion IRQ.

Add a consistency check to validate such condition in the A2P ISR.

Reported-by: Xinglong Yang <xinglong.yang@cixtech.com>
Closes: https://lore.kernel.org/all/PUZPR06MB54981E6FA00D82BFDBB864FBF08DA@PUZPR06MB5498.apcprd06.prod.outlook.com/
Fixes: 5c8a47a5a91d ("firmware: arm_scmi: Make scmi core independent of the transport type")
Cc: stable@vger.kernel.org # 5.15+
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Tested-by: Xinglong Yang <xinglong.yang@cixtech.com>
Link: https://lore.kernel.org/r/20231220172112.763539-1-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

Pull char/misc and other driver updates from Greg KH:
 "Here is the big set of char/misc and other driver subsystem changes
  for 6.8-rc1.

  Other than lots of binder driver changes (as you can see by the merge
  conflicts) included in here are:

   - lots of iio driver updates and additions

   - spmi driver updates

   - eeprom driver updates

   - firmware driver updates

   - ocxl driver updates

   - mhi driver updates

   - w1 driver updates

   - nvmem driver updates

   - coresight driver updates

   - platform driver remove callback api changes

   - tags.sh script updates

   - bus_type constant marking cleanups

   - lots of other small driver updates

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (341 commits)
  android: removed duplicate linux/errno
  uio: Fix use-after-free in uio_open
  drivers: soc: xilinx: add check for platform
  firmware: xilinx: Export function to use in other module
  scripts/tags.sh: remove find_sources
  scripts/tags.sh: use -n to test archinclude
  scripts/tags.sh: add local annotation
  scripts/tags.sh: use more portable -path instead of -wholename
  scripts/tags.sh: Update comment (addition of gtags)
  firmware: zynqmp: Convert to platform remove callback returning void
  firmware: turris-mox-rwtm: Convert to platform remove callback returning void
  firmware: stratix10-svc: Convert to platform remove callback returning void
  firmware: stratix10-rsu: Convert to platform remove callback returning void
  firmware: raspberrypi: Convert to platform remove callback returning void
  firmware: qemu_fw_cfg: Convert to platform remove callback returning void
  firmware: mtk-adsp-ipc: Convert to platform remove callback returning void
  firmware: imx-dsp: Convert to platform remove callback returning void
  firmware: coreboot_table: Convert to platform remove callback returning void
  firmware: arm_scpi: Convert to platform remove callback returning void
  firmware: arm_scmi: Convert to platform remove callback returning void
  ...

Pull pmdomain updates from Ulf Hansson:
 "Core:
   - Move the generic PM domain and its governor to the pmdomain
     subsystem
   - Drop the unused pm_genpd_opp_to_performance_state()

  Providers:
   - Convert some providers to let the ->remove() callback return void
   - amlogic: Add support for G12A ISP power domain
   - arm: Move the SCPI power-domain driver to the pmdomain subsystem
   - arm: Move Kconfig options to the pmdomain subsystem
   - qcom: Update part number to X1E80100 for the rpmhpd"

* tag 'pmdomain-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
  PM: domains: Move genpd and its governor to the pmdomain subsystem
  PM: domains: Drop redundant header for genpd
  PM: domains: Drop the unused pm_genpd_opp_to_performance_state()
  PM: domains: fix domain_governor kernel-doc warnings
  pmdomain: xilinx/zynqmp: Convert to platform remove callback returning void
  pmdomain: qcom-cpr: Convert to platform remove callback returning void
  pmdomain: imx93-pd: Convert to platform remove callback returning void
  pmdomain: imx93-blk-ctrl: Convert to platform remove callback returning void
  pmdomain: imx8mp-blk-ctrl: Convert to platform remove callback returning void
  pmdomain: imx8m-blk-ctrl: Convert to platform remove callback returning void
  pmdomain: imx-gpcv2: Convert to platform remove callback returning void
  pmdomain: imx-gpc: Convert to platform remove callback returning void
  pmdomain: imx-pgc: Convert to platform remove callback returning void
  pmdomain: amlogic: meson-ee-pwrc: add support for G12A ISP power domain
  dt-bindings: power: meson-g12a-power: document ISP power domain
  firmware: arm_scpi: Move power-domain driver to the pmdomain dir
  pmdomain: arm_scmi: Move Kconfig options to the pmdomain subsystem
  pmdomain: qcom: rpmhpd: Update part number to X1E80100
  dt-bindings: power: rpmpd: Update part number to X1E80100

Pull SoC driver updates from Arnd Bergmann:
 "A new drivers/cache/ subsystem is added to contain drivers for
  abstracting cache flush methods on riscv and potentially others, as
  this is needed for handling non-coherent DMA but several SoCs require
  nonstandard hardware methods for it.

  op-tee gains support for asynchronous notification with FF-A, as well
  as support for a system thread for executing in secure world.

  The tee, reset, bus, memory and scmi subsystems have a couple of minor
  updates.

  Platform specific soc driver changes include:

   - Samsung Exynos gains driver support for Google GS101 (Tensor G1)
     across multiple subsystems

   - Qualcomm Snapdragon gains support for SM8650 and X1E along with
     added features for some other SoCs

   - Mediatek adds support for "Smart Voltage Scaling" on MT8186 and
     MT8195, and driver support for MT8188 along with some code
     refactoring.

   - Microchip Polarfire FPGA support for "Auto Update" of the FPGA
     bitstream

   - Apple M1 mailbox driver is rewritten into a SoC driver

   - minor updates on amlogic, mvebu, ti, zynq, imx, renesas and
     hisilicon"

* tag 'soc-drivers-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (189 commits)
  memory: ti-emif-pm: Convert to platform remove callback returning void
  memory: ti-aemif: Convert to platform remove callback returning void
  memory: tegra210-emc: Convert to platform remove callback returning void
  memory: tegra186-emc: Convert to platform remove callback returning void
  memory: stm32-fmc2-ebi: Convert to platform remove callback returning void
  memory: exynos5422-dmc: Convert to platform remove callback returning void
  memory: renesas-rpc-if: Convert to platform remove callback returning void
  memory: omap-gpmc: Convert to platform remove callback returning void
  memory: mtk-smi: Convert to platform remove callback returning void
  memory: jz4780-nemc: Convert to platform remove callback returning void
  memory: fsl_ifc: Convert to platform remove callback returning void
  memory: fsl-corenet-cf: Convert to platform remove callback returning void
  memory: emif: Convert to platform remove callback returning void
  memory: brcmstb_memc: Convert to platform remove callback returning void
  memory: brcmstb_dpfe: Convert to platform remove callback returning void
  soc: qcom: llcc: Fix LLCC_TRP_ATTR2_CFGn offset
  firmware: qcom: qseecom: fix memory leaks in error paths
  dt-bindings: clock: google,gs101: rename CMU_TOP gate defines
  soc: qcom: llcc: Fix typo in kernel-doc
  dt-bindings: soc: qcom,aoss-qmp: document the X1E80100 Always-On Subsystem side channel
  ...

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/86165c8ccd0bb47000a29e711102795b36c8df41.1703693980.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>