linux.git/drivers/firmware/arm_scmi, branch v6.7 Linux kernel source tree firmware: arm_scmi: Fix possible frequency truncation when using level indexing mode 2023-12-04T12:33:44+00:00 Sudeep Holla sudeep.holla@arm.com 2023-11-30T20:43:43+00:00 77f5032e94f244ba08db51e17ca8f37bd7ff9acb The multiplier is already promoted to unsigned long, however the frequency calculations done when using level indexing mode doesn't use the multiplier computed. It instead hardcodes the multiplier value of 1000 at all the usage sites. Clean that up by assigning the multiplier value of 1000 when using the perf level indexing mode and update the frequency calculations to use the multiplier instead. It should fix the possible frequency truncation for all the values greater than or equal to 4GHz on 64-bit machines. Fixes: 31c7c1397a33 ("firmware: arm_scmi: Add v3.2 perf level indexing mode support") Reported-by: Sibi Sankar <quic_sibis@quicinc.com> Closes: https://lore.kernel.org/all/20231129065748.19871-3-quic_sibis@quicinc.com/ Cc: Cristian Marussi <cristian.marussi@arm.com> Link: https://lore.kernel.org/r/20231130204343.503076-2-sudeep.holla@arm.com Reviewed-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> 
The multiplier is already promoted to unsigned long, however the
frequency calculations done when using level indexing mode doesn't
use the multiplier computed. It instead hardcodes the multiplier
value of 1000 at all the usage sites.

Clean that up by assigning the multiplier value of 1000 when using
the perf level indexing mode and update the frequency calculations to
use the multiplier instead. It should fix the possible frequency
truncation for all the values greater than or equal to 4GHz on 64-bit
machines.

Fixes: 31c7c1397a33 ("firmware: arm_scmi: Add v3.2 perf level indexing mode support")
Reported-by: Sibi Sankar <quic_sibis@quicinc.com>
Closes: https://lore.kernel.org/all/20231129065748.19871-3-quic_sibis@quicinc.com/
Cc: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20231130204343.503076-2-sudeep.holla@arm.com
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
firmware: arm_scmi: Fix frequency truncation by promoting multiplier type 2023-12-04T12:32:53+00:00 Sudeep Holla sudeep.holla@arm.com 2023-11-30T20:43:42+00:00 8e3c98d9187e09274fc000a7d1a77b070a42d259 Fix the possible frequency truncation for all values equal to or greater 4GHz on 64bit machines by updating the multiplier 'mult_factor' to 'unsigned long' type. It is also possible that the multiplier itself can be greater than or equal to 2^32. So we need to also fix the equation computing the value of the multiplier. Fixes: a9e3fbfaa0ff ("firmware: arm_scmi: add initial support for performance protocol") Reported-by: Sibi Sankar <quic_sibis@quicinc.com> Closes: https://lore.kernel.org/all/20231129065748.19871-3-quic_sibis@quicinc.com/ Cc: Cristian Marussi <cristian.marussi@arm.com> Link: https://lore.kernel.org/r/20231130204343.503076-1-sudeep.holla@arm.com Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> 
Fix the possible frequency truncation for all values equal to or greater
4GHz on 64bit machines by updating the multiplier 'mult_factor' to
'unsigned long' type. It is also possible that the multiplier itself can
be greater than or equal to 2^32. So we need to also fix the equation
computing the value of the multiplier.

Fixes: a9e3fbfaa0ff ("firmware: arm_scmi: add initial support for performance protocol")
Reported-by: Sibi Sankar <quic_sibis@quicinc.com>
Closes: https://lore.kernel.org/all/20231129065748.19871-3-quic_sibis@quicinc.com/
Cc: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20231130204343.503076-1-sudeep.holla@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Merge tag 'scmi-updates-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers 2023-10-16T20:54:17+00:00 Arnd Bergmann arnd@arndb.de 2023-10-16T20:54:08+00:00 d1debb7b322c4f290875925ba0d058c884d4244a Arm SCMI updates for v6.7 Main additions this time include: 1. SCMI v3.2 clock configuration support: This helps to retrieve the enabled state of a clock as well as allow to set OEM specific clock configurations. 2. Support for generic performance scaling(DVFS): The current SCMI DVFS support is limited to the CPUs in the kernel. This extension enables it to used for all kind of devices and not only for the CPUs. It updates the SCMI cpufreq to utilize the power domain bindings. It also adds a more generic SCMI performance domain based on the genpd framework that as be used for all the non-CPU devices. 3. Extend the generic performance scaling(DVFS) support for firmware driver OPPs: Consumer drivers for devices that are attached to the SCMI performance domain can't make use of the current OPP library to scale performance as the OPPs are firmware driven and often obtained from the firmware rather than the device tree. These changes extend the generic OPP and genpd PM domain frameworks to identify and utilise these firmware driven OPPs. 4. SCMI v3.2 clock parent support: This enables the support for discovering and changing parent clocks and extending the SCMI clk driver to use the same. 5. Qualcom SMC/HVC transport support: The Qualcomm virtual platforms require capability id in the hypervisor call to identify which doorbell to assert when supporting multiple SMC/HVC based SCMI transport channels. Extra parameter is added to support the same and the same is obtained at the fixed address in the shared memory which is initialised by the firmware. 6. Move the existing SCMI power domain driver under drivers/pmdomain Apart from the above main changes, it also include couple of minor fixes and cosmetic reworks. * tag 'scmi-updates-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: (37 commits) firmware: arm_scmi: Add qcom smc/hvc transport support dt-bindings: arm: Add new compatible for smc/hvc transport for SCMI firmware: arm_scmi: Convert u32 to unsigned long to align with arm_smccc_1_1_invoke() clk: scmi: Add support for clock {set,get}_parent firmware: arm_scmi: Add support for clock parents clk: scmi: Free scmi_clk allocated when the clocks with invalid info are skipped firmware: arm_scpi: Use device_get_match_data() firmware: arm_scmi: Add generic OPP support to the SCMI performance domain firmware: arm_scmi: Specify the performance level when adding an OPP firmware: arm_scmi: Simplify error path in scmi_dvfs_device_opps_add() OPP: Extend support for the opp-level beyond required-opps OPP: Switch to use dev_pm_domain_set_performance_state() OPP: Extend dev_pm_opp_data with a level OPP: Add dev_pm_opp_add_dynamic() to allow more flexibility PM: domains: Implement the ->set_performance_state() callback for genpd PM: domains: Introduce dev_pm_domain_set_performance_state() firmware: arm_scmi: Rename scmi_{msg_,}clock_config_{get,set}_{2,21} firmware: arm_scmi: Do not use !! on boolean when setting msg->flags firmware: arm_scmi: Move power-domain driver to the pmdomain dir pmdomain: arm: Add the SCMI performance domain ... Link: https://lore.kernel.org/r/20231010124347.1620040-1-sudeep.holla@arm.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> 
Arm SCMI updates for v6.7

Main additions this time include:

1. SCMI v3.2 clock configuration support:
   This helps to retrieve the enabled state of a clock as well as allow
   to set OEM specific clock configurations.

2. Support for generic performance scaling(DVFS):
   The current SCMI DVFS support is limited to the CPUs in the kernel.
   This extension enables it to used for all kind of devices and not
   only for the CPUs. It updates the SCMI cpufreq to utilize the power
   domain bindings. It also adds a more generic SCMI performance domain
   based on the genpd framework that as be used for all the non-CPU
   devices.

3. Extend the generic performance scaling(DVFS) support for firmware
   driver OPPs:
   Consumer drivers for devices that are attached to the SCMI performance
   domain can't make use of the current OPP library to scale performance
   as the OPPs are firmware driven and often obtained from the firmware
   rather than the device tree. These changes extend the generic OPP
   and genpd PM domain frameworks to identify and utilise these firmware
   driven OPPs.

4. SCMI v3.2 clock parent support:
   This enables the support for discovering and changing parent clocks
   and extending the SCMI clk driver to use the same.

5. Qualcom SMC/HVC transport support:
   The Qualcomm virtual platforms require capability id in the hypervisor
   call to identify which doorbell to assert when supporting multiple
   SMC/HVC based SCMI transport channels. Extra parameter is added to
   support the same and the same is obtained at the fixed address in the
   shared memory which is initialised by the firmware.

6. Move the existing SCMI power domain driver under drivers/pmdomain

Apart from the above main changes, it also include couple of minor fixes
and cosmetic reworks.

* tag 'scmi-updates-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: (37 commits)
  firmware: arm_scmi: Add qcom smc/hvc transport support
  dt-bindings: arm: Add new compatible for smc/hvc transport for SCMI
  firmware: arm_scmi: Convert u32 to unsigned long to align with arm_smccc_1_1_invoke()
  clk: scmi: Add support for clock {set,get}_parent
  firmware: arm_scmi: Add support for clock parents
  clk: scmi: Free scmi_clk allocated when the clocks with invalid info are skipped
  firmware: arm_scpi: Use device_get_match_data()
  firmware: arm_scmi: Add generic OPP support to the SCMI performance domain
  firmware: arm_scmi: Specify the performance level when adding an OPP
  firmware: arm_scmi: Simplify error path in scmi_dvfs_device_opps_add()
  OPP: Extend support for the opp-level beyond required-opps
  OPP: Switch to use dev_pm_domain_set_performance_state()
  OPP: Extend dev_pm_opp_data with a level
  OPP: Add dev_pm_opp_add_dynamic() to allow more flexibility
  PM: domains: Implement the ->set_performance_state() callback for genpd
  PM: domains: Introduce dev_pm_domain_set_performance_state()
  firmware: arm_scmi: Rename scmi_{msg_,}clock_config_{get,set}_{2,21}
  firmware: arm_scmi: Do not use !! on boolean when setting msg->flags
  firmware: arm_scmi: Move power-domain driver to the pmdomain dir
  pmdomain: arm: Add the SCMI performance domain
  ...

Link: https://lore.kernel.org/r/20231010124347.1620040-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
firmware: arm_scmi: Add qcom smc/hvc transport support 2023-10-09T21:07:13+00:00 Nikunj Kela quic_nkela@quicinc.com 2023-10-09T19:14:37+00:00 da405477e7670782241234ea6b4309f3224ecb63 This change adds the support for SCMI message exchange on Qualcomm virtual platforms. The hypervisor associates an object-id also known as capability-id with each smc/hvc doorbell object. The capability-id is used to identify the doorbell from the VM's capability namespace, similar to a file-descriptor. The hypervisor, in addition to the function-id, expects the capability-id to be passed in x1 register when SMC/HVC call is invoked. The capability-id is allocated by the hypervisor on bootup and is stored in the shmem region by the firmware before starting Linux. Signed-off-by: Nikunj Kela <quic_nkela@quicinc.com> Reviewed-by: Brian Masney <bmasney@redhat.com> Link: https://lore.kernel.org/r/20231009191437.27926-3-quic_nkela@quicinc.com Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> 
This change adds the support for SCMI message exchange on Qualcomm
virtual platforms.

The hypervisor associates an object-id also known as capability-id
with each smc/hvc doorbell object. The capability-id is used to
identify the doorbell from the VM's capability namespace, similar
to a file-descriptor.

The hypervisor, in addition to the function-id, expects the capability-id
to be passed in x1 register when SMC/HVC call is invoked.

The capability-id is allocated by the hypervisor on bootup and is stored in
the shmem region by the firmware before starting Linux.

Signed-off-by: Nikunj Kela <quic_nkela@quicinc.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20231009191437.27926-3-quic_nkela@quicinc.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
firmware: arm_scmi: Convert u32 to unsigned long to align with arm_smccc_1_1_invoke() 2023-10-09T21:05:22+00:00 Sudeep Holla sudeep.holla@arm.com 2023-10-09T15:20:49+00:00 1f17395124a53a8edbb6c51e37b98b49a3523b9b All the parameters to arm_smccc_1_1_invoke() are unsigned long which aligns well on both 32-bit and 64-bit Arm based platforms. Let us store all the members in the structure scmi_smc used as the parameters to the arm_smccc_1_1_invoke() call as unsigned long. Cc: Cristian Marussi <cristian.marussi@arm.com> Reviewed-by: Cristian Marussi <cristian.marussi@arm.com> Link: https://lore.kernel.org/r/20231009152049.1428872-1-sudeep.holla@arm.com Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> 
All the parameters to arm_smccc_1_1_invoke() are unsigned long which
aligns well on both 32-bit and 64-bit Arm based platforms. Let us store
all the members in the structure scmi_smc used as the parameters to the
arm_smccc_1_1_invoke() call as unsigned long.

Cc: Cristian Marussi <cristian.marussi@arm.com>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20231009152049.1428872-1-sudeep.holla@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
firmware: arm_scmi: Add support for clock parents 2023-10-08T20:16:30+00:00 Peng Fan peng.fan@nxp.com 2023-10-03T23:42:23+00:00 77bbfe607b1d306c88bf96fed00c030f6bf462f1 SCMI v3.2 spec introduces CLOCK_POSSIBLE_PARENTS_GET, CLOCK_PARENT_SET and CLOCK_PARENT_GET. Add support for these to enable clock parents and use them in the clock driver. Reviewed-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Link: https://lore.kernel.org/r/20231004-scmi-clock-v3-v5-1-1b8a1435673e@nxp.com Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> 
SCMI v3.2 spec introduces CLOCK_POSSIBLE_PARENTS_GET, CLOCK_PARENT_SET
and CLOCK_PARENT_GET. Add support for these to enable clock parents
and use them in the clock driver.

Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20231004-scmi-clock-v3-v5-1-1b8a1435673e@nxp.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
firmware: arm_scmi: Specify the performance level when adding an OPP 2023-10-06T08:41:03+00:00 Ulf Hansson ulf.hansson@linaro.org 2023-09-25T13:17:14+00:00 5a6a104193520dc3b66ad2c7d823e00b50734ab6 To enable the performance level to be used for OPPs, let's convert into using the dev_pm_opp_add_dynamic() API when creating them. This will be particularly useful for the SCMI performance domain, as shown through subsequent changes. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20230925131715.138411-9-ulf.hansson@linaro.org Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> 
To enable the performance level to be used for OPPs, let's convert into
using the dev_pm_opp_add_dynamic() API when creating them. This will be
particularly useful for the SCMI performance domain, as shown through
subsequent changes.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20230925131715.138411-9-ulf.hansson@linaro.org
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
firmware: arm_scmi: Simplify error path in scmi_dvfs_device_opps_add() 2023-10-06T08:41:03+00:00 Ulf Hansson ulf.hansson@linaro.org 2023-09-25T13:17:13+00:00 033ca4de129646e9969a6838b44cca0fac38e219 Let's simplify the code in scmi_dvfs_device_opps_add() by using dev_pm_opp_remove_all_dynamic() in the error path. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20230925131715.138411-8-ulf.hansson@linaro.org Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> 
Let's simplify the code in scmi_dvfs_device_opps_add() by using
dev_pm_opp_remove_all_dynamic() in the error path.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20230925131715.138411-8-ulf.hansson@linaro.org
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
firmware: arm_scmi: Rename scmi_{msg_,}clock_config_{get,set}_{2,21} 2023-09-27T12:53:23+00:00 Sudeep Holla sudeep.holla@arm.com 2023-09-25T10:15:57+00:00 8b6022be4c6e3e0d37c3e1378c9ff0a2c8717b09 It is very confusing to use *_v2 for everything applicable until SCMI clock protocol version v2.0 including v1.0 for example. So let us rename such that *_v2 is used only for SCMI clock protocol v2.1 onwards. Also add comment to indicate the same explicitly. Reviewed-by: Cristian Marussi <cristian.marussi@arm.com> Link: https://lore.kernel.org/r/20230925101557.3839860-1-sudeep.holla@arm.com Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> 
It is very confusing to use *_v2 for everything applicable until SCMI
clock protocol version v2.0 including v1.0 for example. So let us rename
such that *_v2 is used only for SCMI clock protocol v2.1 onwards. Also
add comment to indicate the same explicitly.

Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20230925101557.3839860-1-sudeep.holla@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
firmware: arm_scmi: Do not use !! on boolean when setting msg->flags 2023-09-27T12:17:53+00:00 Sudeep Holla sudeep.holla@arm.com 2023-09-21T08:52:57+00:00 a10aa2584ef5223398cce82310bf5fa6ef9a75ab Both pc->async_powercap_cap_set and ignore_dresp are already boolean. Use of !! on them is obviously dubious. Sparse reports: drivers/firmware/arm_scmi/powercap.c:363:17: warning: dubious: x & !y drivers/firmware/arm_scmi/powercap.c:363:17: warning: dubious: x & !y Remove the unnecessary !! and get rid of the warning. Reviewed-by: Cristian Marussi <cristian.marussi@arm.com> Link: https://lore.kernel.org/r/20230921085257.3125744-1-sudeep.holla@arm.com Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> 
Both pc->async_powercap_cap_set and ignore_dresp are already boolean.
Use of !! on them is obviously dubious.

Sparse reports:
drivers/firmware/arm_scmi/powercap.c:363:17: warning: dubious: x & !y
drivers/firmware/arm_scmi/powercap.c:363:17: warning: dubious: x & !y

Remove the unnecessary !! and get rid of the warning.

Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20230921085257.3125744-1-sudeep.holla@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>