Pull ARM SoC driver updates from Arnd Bergmann:
 "Updates for SoC specific drivers include a few subsystems that have
  their own maintainers but send them through the soc tree:

  TEE/OP-TEE:
   - Add tracepoints around calls to secure world

  Memory controller drivers:
   - Minor fixes for Renesas, Exynos, Mediatek and Tegra platforms
   - Add debug statistics to Tegra20 memory controller
   - Update Tegra bindings and convert to dtschema

  ARM SCMI Firmware:
   - Support for modular SCMI protocols and vendor specific extensions
   - New SCMI IIO driver
   - Per-cpu DVFS

  The other driver changes are all from the platform maintainers
  directly and reflect the drivers that don't fit into any other
  subsystem as well as treewide changes for a particular platform.

  SoCFPGA:
   - Various cleanups contributed by Krzysztof Kozlowski

  Mediatek:
   - add MT8183 support to mutex driver
   - MMSYS: use per SoC array to describe the possible routing
   - add MMSYS support for MT8183 and MT8167
   - add support for PMIC wrapper with integrated arbiter
   - add support for MT8192/MT6873

  Tegra:
   - Bug fixes to PMC and clock drivers

  NXP/i.MX:
   - Update SCU power domain driver to keep console domain power on.
   - Add missing ADC1 power domain to SCU power domain driver.
   - Update comments for single global power domain in SCU power domain
     driver.
   - Add i.MX51/i.MX53 unique id support to i.MX SoC driver.

  NXP/FSL SoC driver updates for v5.13
   - Add ACPI support for RCPM driver
   - Use generic io{read,write} for QE drivers after performance
     optimized for PowerPC
   - Fix QBMAN probe to cleanup HW states correctly for kexec
   - Various cleanup and style fix for QBMAN/QE/GUTS drivers

  OMAP:
   - Preparation to use devicetree for genpd
   - ti-sysc needs iorange check improved when the interconnect target
     module has no control registers listed
   - ti-sysc needs to probe l4_wkup and l4_cfg interconnects first to
     avoid issues with missing resources and unnecessary deferred probe
   - ti-sysc debug option can now detect more devices
   - ti-sysc now warns if an old incomplete devicetree data is found as
     we now rely on it being complete for am3 and 4
   - soc init code needs to check for prcm and prm nodes for omap4/5 and
     dra7
   - omap-prm driver needs to enable autoidle retention support for
     omap4
   - omap5 clocks are missing gpmc and ocmc clock registers
   - pci-dra7xx now needs to use builtin_platform_driver instead of
     using builtin_platform_driver_probe for deferred probe to work

  Raspberry Pi:
   - Fix-up all RPi firmware drivers so as for unbind to happen in an
     orderly fashion
   - Support for RPi's PoE hat PWM bus

  Qualcomm
   - Improved detection for SCM calling conventions
   - Support for OEM specific wifi firmware path
   - Added drivers for SC7280/SM8350: RPMH, LLCC< AOSS QMP"

* tag 'arm-drivers-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits)
  soc: aspeed: fix a ternary sign expansion bug
  memory: mtk-smi: Add device-link between smi-larb and smi-common
  memory: samsung: exynos5422-dmc: handle clk_set_parent() failure
  memory: renesas-rpc-if: fix possible NULL pointer dereference of resource
  clk: socfpga: fix iomem pointer cast on 64-bit
  soc: aspeed: Adapt to new LPC device tree layout
  pinctrl: aspeed-g5: Adapt to new LPC device tree layout
  ipmi: kcs: aspeed: Adapt to new LPC DTS layout
  ARM: dts: Remove LPC BMC and Host partitions
  dt-bindings: aspeed-lpc: Remove LPC partitioning
  soc: fsl: enable acpi support in RCPM driver
  soc: qcom: mdt_loader: Detect truncated read of segments
  soc: qcom: mdt_loader: Validate that p_filesz < p_memsz
  soc: qcom: pdr: Fix error return code in pdr_register_listener
  firmware: qcom_scm: Fix kernel-doc function names to match
  firmware: qcom_scm: Suppress sysfs bind attributes
  firmware: qcom_scm: Workaround lack of "is available" call on SC7180
  firmware: qcom_scm: Reduce locking section for __get_convention()
  firmware: qcom_scm: Make __qcom_scm_is_call_available() return bool
  Revert "soc: fsl: qe: introduce qe_io{read,write}* wrappers"
  ...

When CONFIG_QCOM_SCM is y and CONFIG_HAVE_ARM_SMCCC
is not set, compiling errors are encountered as follows:

drivers/firmware/qcom_scm-smc.o: In function `__scm_smc_do_quirk':
qcom_scm-smc.c:(.text+0x36): undefined reference to `__arm_smccc_smc'
drivers/firmware/qcom_scm-legacy.o: In function `scm_legacy_call':
qcom_scm-legacy.c:(.text+0xe2): undefined reference to `__arm_smccc_smc'
drivers/firmware/qcom_scm-legacy.o: In function `scm_legacy_call_atomic':
qcom_scm-legacy.c:(.text+0x1f0): undefined reference to `__arm_smccc_smc'

Note that __arm_smccc_smc is defined when HAVE_ARM_SMCCC is y.
So add dependency on HAVE_ARM_SMCCC in QCOM_SCM configuration.

Fixes: 916f743da354 ("firmware: qcom: scm: Move the scm driver to drivers/firmware")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: He Ying <heying24@huawei.com>
Link: https://lore.kernel.org/r/20210406094200.60952-1-heying24@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The Stratix10 service layer and RCU drivers are useful only on
Stratix10, so on ARMv8.  Compile testing the RCU driver on 32-bit ARM
fails:

  drivers/firmware/stratix10-rsu.c: In function 'rsu_status_callback':
  include/linux/compiler_types.h:320:38: error: call to '__compiletime_assert_179'
    declared with attribute error: FIELD_GET: type of reg too small for mask
    _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
  ...
  drivers/firmware/stratix10-rsu.c:96:26: note: in expansion of macro 'FIELD_GET'
    priv->status.version = FIELD_GET(RSU_VERSION_MASK,

Fixes: 4483397b0353 ("ARM: socfpga: drop ARCH_SOCFPGA")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Richard Gong <richard.gong@linux.intel.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
---
v2: add Fixes tag

Agilex, N5X and Stratix 10 share all quite similar arm64 hard cores and
SoC-part.  Up to a point that N5X uses the same DTSI as Agilex.  From
the Linux kernel point of view these are flavors of the same
architecture so there is no need for three top-level arm64
architectures.  Simplify this by merging all three architectures into
ARCH_INTEL_SOCFPGA and dropping the other ARCH* arm64 Kconfig entries.

The side effect is that the INTEL_STRATIX10_SERVICE will now be
available for both 32-bit and 64-bit Intel SoCFPGA, even though it is
used only for 64-bit.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>

There is a spelling mistake in the Kconfig help text. Fix it.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20201204192250.1151316-1-colin.king@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull ARM SoC-related driver updates from Olof Johansson:
 "Various driver updates for platforms. A bulk of this is smaller fixes
  or cleanups, but some of the new material this time around is:

   - Support for Nvidia Tegra234 SoC

   - Ring accelerator support for TI AM65x

   - PRUSS driver for TI platforms

   - Renesas support for R-Car V3U SoC

   - Reset support for Cortex-M4 processor on i.MX8MQ

  There are also new socinfo entries for a handful of different SoCs and
  platforms"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (131 commits)
  drm/mediatek: reduce clear event
  soc: mediatek: cmdq: add clear option in cmdq_pkt_wfe api
  soc: mediatek: cmdq: add jump function
  soc: mediatek: cmdq: add write_s_mask value function
  soc: mediatek: cmdq: add write_s value function
  soc: mediatek: cmdq: add read_s function
  soc: mediatek: cmdq: add write_s_mask function
  soc: mediatek: cmdq: add write_s function
  soc: mediatek: cmdq: add address shift in jump
  soc: mediatek: mtk-infracfg: Fix kerneldoc
  soc: amlogic: pm-domains: use always-on flag
  reset: sti: reset-syscfg: fix struct description warnings
  reset: imx7: add the cm4 reset for i.MX8MQ
  dt-bindings: reset: imx8mq: add m4 reset
  reset: Fix and extend kerneldoc
  reset: reset-zynqmp: Added support for Versal platform
  dt-bindings: reset: Updated binding for Versal reset driver
  reset: imx7: Support module build
  soc: fsl: qe: Remove unnessesary check in ucc_set_tdm_rxtx_clk
  soc: fsl: qman: convert to use be32_add_cpu()
  ...

Pull parisc updates from Helge Deller:

 - Added fw_cfg support for parisc on qemu

 - Added font support in sti text console driver for byte- and word-mode
   ROMs

 - Switch to more fine grained lws locks and improve spinlock handling

 - Add ioread64_hi_lo() and iowrite64_hi_lo() to avoid 0-day linking
   errors

 - Mark pointers volatile in __xchg8(), __xchg32() and __xchg64() to
   help compiler

 - Header file cleanups, mostly removal of unused HP-UX compat defines

 - Drop one bit from our O_NONBLOCK define to become now 000200000

 - Add MAP_UNINITIALIZED define to avoid userspace compile errors

 - Drop CONFIG_IDE from defconfigs

 - Speed up synchronize_caches() on UP machines

 - Rewrite tlb flush threshold calculation

 - Comment fixes and cleanups

* 'parisc-5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc/sticon: Add user font support
  parisc/sticon: Always register sticon console driver
  parisc: Add MAP_UNINITIALIZED define
  parisc: Improve spinlock handling
  parisc: Install vmlinuz instead of zImage file
  parisc: Rewrite tlb flush threshold calculation
  parisc: Switch to more fine grained lws locks
  parisc: Mark pointers volatile in __xchg8(), __xchg32() and __xchg64()
  parisc: Fix comments and enable interrupts later
  parisc: Add alternative patching to synchronize_caches define
  parisc: Add ioread64_hi_lo() and iowrite64_hi_lo()
  parisc: disable CONFIG_IDE in defconfigs
  parisc: Drop useless comments in uapi/asm/signal.h
  parisc: Define O_NONBLOCK to become 000200000
  parisc: Drop HP-UX specific fcntl and signal flags
  parisc: Avoid external interrupts when IPI finishes
  parisc: Add qemu fw_cfg interface
  fw_cfg: Add support for parisc architecture

Signed-off-by: Helge Deller <deller@gmx.de>

Now, with all the plumbing in place to enable building scmi as a module
instead of built-in modules, let us enable the same.

Link: https://lore.kernel.org/r/20200907195046.56615-5-sudeep.holla@arm.com
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

This reverts commit c65822fef4adc0ba40c37a47337376ce75f7a7bc.

The initialization of Raspberry Pi 4's USB chip is now handled through a
reset controller. No need to directly call the firmware routine through a
PCI quirk.

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20200629161845.6021-7-nsaenzjulienne@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>