IA32_MCG_STATUS.RIPV indicates whether the return RIP value pushed onto
the stack as part of machine check delivery is valid or not.

Various drivers copied a code fragment that uses the RIPV bit to
determine the severity of the error as either HW_EVENT_ERR_UNCORRECTED
or HW_EVENT_ERR_FATAL, but this check is reversed (marking errors where
RIPV is set as "FATAL").

Reverse the tests so that the error is marked fatal when RIPV is not set.

Reported-by: Gabriele Paoloni <gabriele.paoloni@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20200707194324.14884-1-tony.luck@intel.com

Pull edac fix from Tony Luck:
 "Fix for the ie31200 driver that missed the first pull"

* tag 'edac_updates_for_5.9_pt2' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
  EDAC/ie31200: Fallback if host bridge device is already initialized

The Intel uncore driver may claim some of the pci ids from ie31200 which
means that the ie31200 edac driver will not initialize them as part of
pci_register_driver().

Let's add a fallback for this case to 'pci_get_device()' to get a
reference on the device such that it can still be configured. This is
similar in approach to other edac drivers.

Signed-off-by: Jason Baron <jbaron@akamai.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-edac <linux-edac@vger.kernel.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/1594923911-10885-1-git-send-email-jbaron@akamai.com

Pull EDAC updates from Tony Luck:
 "Boris is on vacation and aske me to send you the EDAC changes"

* tag 'edac_updates_for_5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
  EDAC: Fix reference count leaks
  EDAC: Remove edac_get_dimm_by_index()
  EDAC/ghes: Scan the system once on driver init
  EDAC/ghes: Remove unused members of struct ghes_edac_pvt, rename it to ghes_pvt
  EDAC/ghes: Setup DIMM label from DMI and use it in error reports
  EDAC, {skx,i10nm}: Use CPU stepping macro to pass configurations
  EDAC/mc: Call edac_inc_ue_error() before panic
  EDAC, pnd2: Set MCE_PRIO_EDAC priority for pnd2_mce_dec notifier

Pull x86 RAS updates from Ingo Molnar:
 "Boris is on vacation and he asked us to send you the pending RAS bits:

   - Print the PPIN field on CPUs that fill them out

   - Fix an MCE injection bug

   - Simplify a kzalloc in dev_mcelog_init_device()"

* tag 'ras-core-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mce, EDAC/mce_amd: Print PPIN in machine check records
  x86/mce/dev-mcelog: Use struct_size() helper in kzalloc()
  x86/mce/inject: Fix a wrong assignment of i_mce.status

Print the Protected Processor Identification Number (PPIN) on processors
which support it.

 [ bp: Massage. ]

Signed-off-by: Smita Koralahalli <Smita.KoralahalliChannabasappa@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200623130059.8870-1-Smita.KoralahalliChannabasappa@amd.com

Commit:

  da92110dfdfa ("EDAC, amd64_edac: Extend scrub rate support to F15hM60h")

added support for F15h, model 0x60 CPUs but in doing so, missed to read
back SCRCTRL PCI config register on F15h CPUs which are *not* model
0x60. Add that read so that doing

  $ cat /sys/devices/system/edac/mc/mc0/sdram_scrub_rate

can show the previously set DRAM scrub rate.

Fixes: da92110dfdfa ("EDAC, amd64_edac: Extend scrub rate support to F15hM60h")
Reported-by: Anders Andersson <pipatron@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org> #v4.4..
Link: https://lkml.kernel.org/r/CAKkunMbNWppx_i6xSdDHLseA2QQmGJqj_crY=NF-GZML5np4Vw@mail.gmail.com

When kobject_init_and_add() returns an error, it should be handled
because kobject_init_and_add() takes a reference even when it fails. If
this function returns an error, kobject_put() must be called to properly
clean up the memory associated with the object.

Therefore, replace calling kfree() and call kobject_put() and add a
missing kobject_put() in the edac_device_register_sysfs_main_kobj()
error path.

 [ bp: Massage and merge into a single patch. ]

Fixes: b2ed215a3338 ("Kobject: change drivers/edac to use kobject_init_and_add")
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200528202238.18078-1-wu000273@umn.edu
Link: https://lkml.kernel.org/r/20200528203526.20908-1-wu000273@umn.edu

Change the hardware scanning and figuring out how many DIMMs a machine
has to a single, one-time thing which happens once on driver init. After
that scanning completes, struct ghes_hw_desc contains a representation
of the hardware which the driver can then use for later initialization.

Then, copy the DIMM information into the respective EDAC core
representation of those.

Get rid of ghes_edac_dimm_fill and use a struct dimm_info array
directly.

This way, hw detection and further driver initialization is nicely
and logically split. Further additions should all be added to
ghes_scan_system() and the hw representation extended as needed.

There should be no functionality change resulting from this patch.

Signed-off-by: Borislav Petkov <bp@suse.de>