linux.git/drivers/edac, branch v3.14-rc3

EDAC: Correct workqueue setup path

2014-02-14T09:40:47+00:00

We're using edac_mc_workq_setup() both on the init path, when
we load an edac driver and when we change the polling period
(edac_mc_reset_delay_period) through /sys/.../edac_mc_poll_msec.

On that second path we don't need to init the workqueue which has been
initialized already.

Thanks to Tejun for workqueue insights.

Signed-off-by: Borislav Petkov 
Link: http://lkml.kernel.org/r/1391457913-881-1-git-send-email-prarit@redhat.com
Cc:

EDAC: Poll timeout cannot be zero, p2

2014-02-14T09:40:29+00:00

Sanitize code even more to accept unsigned longs only and to not allow
polling intervals below 1 second as this is unnecessary and doesn't make
much sense anyway for polling errors.

Signed-off-by: Borislav Petkov 
Link: http://lkml.kernel.org/r/1391457913-881-1-git-send-email-prarit@redhat.com
Cc: Doug Thompson 
Cc:

drivers/edac/edac_mc_sysfs.c: poll timeout cannot be zero

2014-02-11T00:01:41+00:00

If you do

  echo 0 > /sys/module/edac_core/parameters/edac_mc_poll_msec

the following stack trace is output because the edac module is not
designed to poll with a timeout of zero.

  WARNING: CPU: 12 PID: 0 at lib/list_debug.c:33 __list_add+0xac/0xc0()
  list_add corruption. prev->next should be next (ffff8808291dd1b8), but was           (null). (prev=ffff8808286fe3f8).
  Modules linked in: sg nfsv3 rpcsec_gss_krb5 nfsv4 dns_resolver nfs fscache cfg80211 rfkill x86_pkg_temp_thermal coretemp kvm_intel kvm ixgbe e1000e crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper cryptd iTCO_wdt ptp sb_edac iTCO_vendor_support pps_core mdio ipmi_devintf edac_core ioatdma microcode shpchp lpc_ich pcspkr i2c_i801 dca mfd_core ipmi_si wmi ipmi_msghandler nfsd auth_rpcgss nfs_acl lockd sunrpc xfs libcrc32c sd_mod sr_mod cdrom crc_t10dif crct10dif_common mgag200 syscopyarea sysfillrect sysimgblt isci i2c_algo_bit drm_kms_helper ttm drm libsas ahci libahci scsi_transport_sas libata i2c_core dm_mirror dm_region_hash dm_log dm_mod
  CPU: 12 PID: 0 Comm: swapper/12 Not tainted 3.13.0+ #1
  Hardware name: Intel Corporation LH Pass ........../SVRBD-ROW_T, BIOS SE5C600.86B.01.08.0003.022620131521 02/26/2013
  Call Trace:
   
    __list_add+0xac/0xc0
    __internal_add_timer+0xab/0x130
    internal_add_timer+0x17/0x40
    mod_timer_pinned+0xca/0x170
    intel_pstate_timer_func+0x28a/0x380
    call_timer_fn+0x36/0x100
    run_timer_softirq+0x1ff/0x2f0
    __do_softirq+0xf5/0x2e0
    irq_exit+0x10d/0x120
    smp_apic_timer_interrupt+0x45/0x60
    apic_timer_interrupt+0x6d/0x80
   
    cpuidle_idle_call+0xb9/0x1f0
    arch_cpu_idle+0xe/0x30
    cpu_startup_entry+0x9e/0x240
    start_secondary+0x1e4/0x290

  kernel BUG at kernel/timer.c:1084!
  invalid opcode: 0000 [#1] SMP
  Modules linked in: sg nfsv3 rpcsec_gss_krb5 nfsv4 dns_resolver nfs fscache cfg80211 rfkill x86_pkg_temp_thermal coretemp kvm_intel kvm ixgbe e1000e crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper cryptd iTCO_wdt ptp sb_edac iTCO_vendor_support pps_core mdio ipmi_devintf edac_core ioatdma microcode shpchp lpc_ich pcspkr i2c_i801 dca mfd_core ipmi_si wmi ipmi_msghandler nfsd auth_rpcgss nfs_acl lockd sunrpc xfs libcrc32c sd_mod sr_mod cdrom crc_t10dif crct10dif_common mgag200 syscopyarea sysfillrect sysimgblt isci i2c_algo_bit drm_kms_helper ttm drm libsas ahci libahci scsi_transport_sas libata i2c_core dm_mirror dm_region_hash dm_log dm_mod
  CPU: 12 PID: 0 Comm: swapper/12 Tainted: G        W    3.13.0+ #1
  Hardware name: Intel Corporation LH Pass ........../SVRBD-ROW_T, BIOS SE5C600.86B.01.08.0003.022620131521 02/26/2013
  Call Trace:
   
    run_timer_softirq+0x245/0x2f0
    __do_softirq+0xf5/0x2e0
    irq_exit+0x10d/0x120
    smp_apic_timer_interrupt+0x45/0x60
    apic_timer_interrupt+0x6d/0x80
   
    cpuidle_idle_call+0xb9/0x1f0
    arch_cpu_idle+0xe/0x30
    cpu_startup_entry+0x9e/0x240
    start_secondary+0x1e4/0x290
  RIP   cascade+0x93/0xa0

  WARNING: CPU: 36 PID: 1154 at kernel/workqueue.c:1461 __queue_delayed_work+0xed/0x1a0()
  Modules linked in: sg nfsv3 rpcsec_gss_krb5 nfsv4 dns_resolver nfs fscache cfg80211 rfkill x86_pkg_temp_thermal coretemp kvm_intel kvm ixgbe e1000e crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper cryptd iTCO_wdt ptp sb_edac iTCO_vendor_support pps_core mdio ipmi_devintf edac_core ioatdma microcode shpchp lpc_ich pcspkr i2c_i801 dca mfd_core ipmi_si wmi ipmi_msghandler nfsd auth_rpcgss nfs_acl lockd sunrpc xfs libcrc32c sd_mod sr_mod cdrom crc_t10dif crct10dif_common mgag200 syscopyarea sysfillrect sysimgblt isci i2c_algo_bit drm_kms_helper ttm drm libsas ahci libahci scsi_transport_sas libata i2c_core dm_mirror dm_region_hash dm_log dm_mod
  CPU: 36 PID: 1154 Comm: kworker/u481:3 Tainted: G        W    3.13.0+ #1
  Hardware name: Intel Corporation LH Pass ........../SVRBD-ROW_T, BIOS SE5C600.86B.01.08.0003.022620131521 02/26/2013
  Workqueue: edac-poller edac_mc_workq_function [edac_core]
  Call Trace:
    dump_stack+0x45/0x56
    warn_slowpath_common+0x7d/0xa0
    warn_slowpath_null+0x1a/0x20
    __queue_delayed_work+0xed/0x1a0
    queue_delayed_work_on+0x27/0x50
    edac_mc_workq_function+0x72/0xa0 [edac_core]
    process_one_work+0x17b/0x460
    worker_thread+0x11b/0x400
    kthread+0xd2/0xf0
    ret_from_fork+0x7c/0xb0

This patch adds a range check in the edac_mc_poll_msec code to check for 0.

Signed-off-by: Prarit Bhargava 
Cc: Doug Thompson 
Cc: Mauro Carvalho Chehab 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

Merge branch 'x86-ras-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2014-01-20T20:10:27+00:00

Pull x86 RAS changes from Ingo Molnar:

 - SCI reporting for other error types not only correctable ones

 - GHES cleanups

 - Add the functionality to override error reporting agents as some
   machines are sporting a new extended error logging capability which,
   if done properly in the BIOS, makes a corresponding EDAC module
   redundant

 - PCIe AER tracepoint severity levels fix

 - Error path correction for the mce device init

 - MCE timer fix

 - Add more flexibility to the error injection (EINJ) debugfs interface

* 'x86-ras-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, mce: Fix mce_start_timer semantics
  ACPI, APEI, GHES: Cleanup ghes memory error handling
  ACPI, APEI: Cleanup alignment-aware accesses
  ACPI, APEI, GHES: Do not report only correctable errors with SCI
  ACPI, APEI, EINJ: Changes to the ACPI/APEI/EINJ debugfs interface
  ACPI, eMCA: Combine eMCA/EDAC event reporting priority
  EDAC, sb_edac: Modify H/W event reporting policy
  EDAC: Add an edac_report parameter to EDAC
  PCI, AER: Fix severity usage in aer trace event
  x86, mce: Call put_device on device_register failure

Merge tag 'edac_for_3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp

2014-01-20T17:26:15+00:00

Pull EDAC updates from Borislav Petkov:
 - mpc85xx PCIe error interrupt support
 - misc small enhancements/fixes all over the place.

* tag 'edac_for_3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  EDAC: Don't try to cancel workqueue when it's never setup
  e752x_edac: Fix pci_dev usage count
  sb_edac: Mark get_mci_for_node_id as static
  EDAC: Mark edac_create_debug_nodes as static
  amd64_edac: Remove "amd64" prefix from static functions
  amd64_edac: Simplify code around decode_bus_error
  amd64_edac: Mark amd64_decode_bus_error as static
  EDAC: Remove DEFINE_PCI_DEVICE_TABLE macro
  amd64_edac: Fix condition to verify max channels allowed for F15 M30h
  edac/85xx: Add PCIe error interrupt edac support

EDAC: Don't try to cancel workqueue when it's never setup

2014-01-10T14:57:36+00:00

We only setup a workqueue for edac devices that use the polling
method. We still try to cancel the workqueue if an edac_device
uses the irq method though. This causes a warning from debug
objects when we remove an edac device:

WARNING: CPU: 0 PID: 56 at lib/debugobjects.c:260 debug_print_object+0x98/0xc0()
ODEBUG: assert_init not available (active state 0) object type: timer_list hint: stub_timer+0x0/0x28
Modules linked in: krait_edac(-)
CPU: 0 PID: 56 Comm: rmmod Not tainted 3.12.0-rc2-00035-g15292a0 #69
(unwind_backtrace+0x0/0x144)
(show_stack+0x20/0x24)
(dump_stack+0x74/0xb4)
(warn_slowpath_common+0x78/0x9c)
(warn_slowpath_fmt+0x40/0x48)
(debug_print_object+0x98/0xc0)
(debug_object_assert_init+0xdc/0xec)
(del_timer+0x24/0x7c)
(try_to_grab_pending+0xc0/0x1b0)
(cancel_delayed_work+0x2c/0xa0)
(edac_device_workq_teardown+0x1c/0x38)
(edac_device_del_device+0xb8/0xe4)
(krait_edac_remove+0x50/0x70 [krait_edac])
(platform_drv_remove+0x24/0x28)
(__device_release_driver+0x68/0xc0)
(driver_detach+0xc4/0xc8)
(bus_remove_driver+0xac/0x114)
(driver_unregister+0x38/0x58)
(platform_driver_unregister+0x1c/0x20)
(krait_edac_driver_exit+0x14/0x1c [krait_edac])
(SyS_delete_module+0x178/0x2b4)

Fix it by skipping the workqueue teardown for such devices.

Signed-off-by: Stephen Boyd 
Link: http://lkml.kernel.org/r/1388434457-4194-2-git-send-email-sboyd@codeaurora.org
Signed-off-by: Borislav Petkov

e752x_edac: Fix pci_dev usage count

2013-12-21T12:26:57+00:00

In case the device 0, function 1 is not found using pci_get_device(),
pci_scan_single_device() will be used but, differently than
pci_get_device(), it allocates a pci_dev but doesn't does bump the usage
count on the pci_dev and after few module removals and loads the pci_dev
will be freed.

Signed-off-by: Aristeu Rozanski 
Reviewed-by: mark gross 
Link: http://lkml.kernel.org/r/20131205153755.GL4545@redhat.com
Signed-off-by: Borislav Petkov

Merge tag 'ras_for_3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp into x86/ras

2013-12-16T13:33:17+00:00

Pull RAS updates from Borislav Petkov:

  * Add the functionality to override error reporting agents as some
  machines are sporting a new extended error logging capability which, if
  done properly in the BIOS, makes a corresponding EDAC module redundant,
  from Gong Chen.

  * PCIe AER tracepoint severity levels fix, from Rui Wang.

  * Error path correction for the mce device init, from Levente Kurusa.

Signed-off-by: Ingo Molnar

sb_edac: Mark get_mci_for_node_id as static

2013-12-15T17:02:13+00:00

This patch marks the function get_mci_for_node_id() as static because it
is not used outside of sb_edac.c.

Thus, it also eliminates the following warning:
drivers/edac/sb_edac.c:918:22: warning: no previous prototype for ‘get_mci_for_node_id’ [-Wmissing-prototypes]

Signed-off-by: Rashika Kheria 
Reviewed-by: Josh Triplett 
Link: http://lkml.kernel.org/r/0441f508186fc4eeabc8e9c3e4dde013d99405d4.1387029387.git.rashika.kheria@gmail.com
Signed-off-by: Borislav Petkov

EDAC: Mark edac_create_debug_nodes as static

2013-12-15T16:59:59+00:00

This patch marks the function edac_create_debug_nodes() as static
because it is not used outside of edac_mc_sysfs.c.

Thus, it also eliminates the following warning:
drivers/edac/edac_mc_sysfs.c:917:5: warning: no previous prototype for ‘edac_create_debug_nodes’ [-Wmissing-prototypes]

Signed-off-by: Rashika Kheria 
Reviewed-by: Josh Triplett 
Link: http://lkml.kernel.org/r/a1c863b08c0d6f67d03280cf908c771bf26a3239.1387029387.git.rashika.kheria@gmail.com
Signed-off-by: Borislav Petkov