linux.git/drivers/dma, branch v6.8-rc2

Merge tag 'dmaengine-fix-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine

2024-01-20T23:03:25+00:00

Pull dmaengine updates from Vinod Koul:
 "New support:
   - Loongson LS2X APB DMA controller
   - sf-pdma: mpfs-pdma support
   - Qualcomm X1E80100 GPI dma controller support

  Updates:
   - Xilinx XDMA updates to support interleaved DMA transfers
   - TI PSIL threads for AM62P and J722S and cfg register regions
     description
   - axi-dmac Improving the cyclic DMA transfers
   - Tegra Support dma-channel-mask property
   - Remaining platform remove callback returning void conversions

 Driver fixes for:
   - Xilinx xdma driver operator precedence and initialization fix
   - Excess kernel-doc warning fix in imx-sdma xilinx xdma drivers
   - format-overflow warning fix for rz-dmac, sh usb dmac drivers
   - 'output may be truncated' fix for shdma, fsl-qdma and dw-edma
     drivers"

* tag 'dmaengine-fix-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (58 commits)
  dmaengine: dw-edma: increase size of 'name' in debugfs code
  dmaengine: fsl-qdma: increase size of 'irq_name'
  dmaengine: shdma: increase size of 'dev_id'
  dmaengine: xilinx: xdma: Fix kernel-doc warnings
  dmaengine: usb-dmac: Avoid format-overflow warning
  dmaengine: sh: rz-dmac: Avoid format-overflow warning
  dmaengine: imx-sdma: fix Excess kernel-doc warnings
  dmaengine: xilinx: xdma: Fix initialization location of desc in xdma_channel_isr()
  dmaengine: xilinx: xdma: Fix operator precedence in xdma_prep_interleaved_dma()
  dmaengine: xilinx: xdma: statify xdma_prep_interleaved_dma
  dmaengine: xilinx: xdma: Workaround truncation compilation error
  dmaengine: pl330: issue_pending waits until WFP state
  dmaengine: xilinx: xdma: Implement interleaved DMA transfers
  dmaengine: xilinx: xdma: Prepare the introduction of interleaved DMA transfers
  dmaengine: xilinx: xdma: Add transfer error reporting
  dmaengine: xilinx: xdma: Add error checking in xdma_channel_isr()
  dmaengine: xilinx: xdma: Rework xdma_terminate_all()
  dmaengine: xilinx: xdma: Ease dma_pool alignment requirements
  dmaengine: xilinx: xdma: Add necessary macro definitions
  dmaengine: xilinx: xdma: Get rid of unused code
  ...

dmaengine: dw-edma: increase size of 'name' in debugfs code

2024-01-19T12:47:34+00:00

We seem to have hit warnings of 'output may be truncated' which is fixed
by increasing the size of 'name'

drivers/dma/dw-edma/dw-hdma-v0-debugfs.c: In function ‘dw_hdma_v0_debugfs_on’:
drivers/dma/dw-edma/dw-hdma-v0-debugfs.c:125:50: error: ‘%d’ directive output may be truncated writing between 1 and 11 bytes into a region of size 8 [-Werror=format-truncation=]
  125 |                 snprintf(name, sizeof(name), "%s:%d", CHANNEL_STR, i);
      |                                                  ^~

drivers/dma/dw-edma/dw-hdma-v0-debugfs.c: In function ‘dw_hdma_v0_debugfs_on’:
drivers/dma/dw-edma/dw-hdma-v0-debugfs.c:142:50: error: ‘%d’ directive output may be truncated writing between 1 and 11 bytes into a region of size 8 [-Werror=format-truncation=]
  142 |                 snprintf(name, sizeof(name), "%s:%d", CHANNEL_STR, i);
      |                                                  ^~
drivers/dma/dw-edma/dw-edma-v0-debugfs.c: In function ‘dw_edma_debugfs_regs_wr’:
drivers/dma/dw-edma/dw-edma-v0-debugfs.c:193:50: error: ‘%d’ directive output may be truncated writing between 1 and 11 bytes into a region of size 8 [-Werror=format-truncation=]
  193 |                 snprintf(name, sizeof(name), "%s:%d", CHANNEL_STR, i);
      |                                                  ^~

Signed-off-by: Vinod Koul

dmaengine: fsl-qdma: increase size of 'irq_name'

2024-01-19T12:44:04+00:00

We seem to have hit warnings of 'output may be truncated' which is fixed
by increasing the size of 'irq_name'

drivers/dma/fsl-qdma.c: In function ‘fsl_qdma_irq_init’:
drivers/dma/fsl-qdma.c:824:46: error: ‘%d’ directive writing between 1 and 11 bytes into a region of size 10 [-Werror=format-overflow=]
  824 |                 sprintf(irq_name, "qdma-queue%d", i);
      |                                              ^~
drivers/dma/fsl-qdma.c:824:35: note: directive argument in the range [-2147483641, 2147483646]
  824 |                 sprintf(irq_name, "qdma-queue%d", i);
      |                                   ^~~~~~~~~~~~~~
drivers/dma/fsl-qdma.c:824:17: note: ‘sprintf’ output between 12 and 22 bytes into a destination of size 20
  824 |                 sprintf(irq_name, "qdma-queue%d", i);
      |                 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Signed-off-by: Vinod Koul

dmaengine: shdma: increase size of 'dev_id'

2024-01-19T12:42:10+00:00

We seem to have hit warnings of 'output may be truncated' which is fixed
by increasing the size of 'dev_id'

drivers/dma/sh/shdmac.c: In function ‘sh_dmae_probe’:
drivers/dma/sh/shdmac.c:541:34: error: ‘%d’ directive output may be truncated writing between 1 and 10 bytes into a region of size 9 [-Werror=format-truncation=]
  541 |                          "sh-dmae%d.%d", pdev->id, id);
      |                                  ^~
In function ‘sh_dmae_chan_probe’,
    inlined from ‘sh_dmae_probe’ at drivers/dma/sh/shdmac.c:845:9:
drivers/dma/sh/shdmac.c:541:26: note: directive argument in the range [0, 2147483647]
  541 |                          "sh-dmae%d.%d", pdev->id, id);
      |                          ^~~~~~~~~~~~~~
drivers/dma/sh/shdmac.c:541:26: note: directive argument in the range [0, 19]
drivers/dma/sh/shdmac.c:540:17: note: ‘snprintf’ output between 11 and 21 bytes into a destination of size 16
  540 |                 snprintf(sh_chan->dev_id, sizeof(sh_chan->dev_id),
      |                 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  541 |                          "sh-dmae%d.%d", pdev->id, id);
      |                          ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Signed-off-by: Vinod Koul

dmaengine: xilinx: xdma: Fix kernel-doc warnings

2024-01-19T12:13:40+00:00

Replace hyphens with colons where necessary.

Reported-by: kernel test robot 
Closes: https://lore.kernel.org/oe-kbuild-all/202312230634.3AIMQ3OP-lkp@intel.com/
Signed-off-by: Jan Kuliga 
Reviewed-by: Randy Dunlap 
Link: https://lore.kernel.org/r/20231222231728.7156-1-jankul@alatek.krakow.pl
Signed-off-by: Vinod Koul

dmaengine: usb-dmac: Avoid format-overflow warning

2024-01-19T12:11:03+00:00

gcc points out that the fix-byte buffer might be too small:
drivers/dma/sh/usb-dmac.c: In function 'usb_dmac_probe':
drivers/dma/sh/usb-dmac.c:720:34: warning: '%u' directive writing between 1 and 10 bytes into a region of size 3 [-Wformat-overflow=]
  720 |         sprintf(pdev_irqname, "ch%u", index);
      |                                  ^~
In function 'usb_dmac_chan_probe',
    inlined from 'usb_dmac_probe' at drivers/dma/sh/usb-dmac.c:814:9:
drivers/dma/sh/usb-dmac.c:720:31: note: directive argument in the range [0, 4294967294]
  720 |         sprintf(pdev_irqname, "ch%u", index);
      |                               ^~~~~~
drivers/dma/sh/usb-dmac.c:720:9: note: 'sprintf' output between 4 and 13 bytes into a destination of size 5
  720 |         sprintf(pdev_irqname, "ch%u", index);
      |         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Maximum number of channels for USB-DMAC as per the driver is 1-99 so use
u8 instead of unsigned int/int for DMAC channel indexing and make the
pdev_irqname string long enough to avoid the warning.

While at it use scnprintf() instead of sprintf() to make the code more
robust.

Signed-off-by: Lad Prabhakar 
Reviewed-by: Geert Uytterhoeven 
Link: https://lore.kernel.org/r/20240110222210.193479-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Vinod Koul

dmaengine: sh: rz-dmac: Avoid format-overflow warning

2024-01-19T11:37:58+00:00

The max channel count for RZ DMAC is 16, hence use u8 instead of unsigned
int and make the pdev_irqname string long enough to avoid the warning.

This fixes the below issue:
drivers/dma/sh/rz-dmac.c: In function ‘rz_dmac_probe’:
drivers/dma/sh/rz-dmac.c:770:34: warning: ‘%u’ directive writing between 1 and 10 bytes into a region of size 3 [-Wformat-overflow=]
  770 |         sprintf(pdev_irqname, "ch%u", index);
      |                                  ^~
In function ‘rz_dmac_chan_probe’,
    inlined from ‘rz_dmac_probe’ at drivers/dma/sh/rz-dmac.c:910:9:
drivers/dma/sh/rz-dmac.c:770:31: note: directive argument in the range [0, 4294967294]
  770 |         sprintf(pdev_irqname, "ch%u", index);
      |                               ^~~~~~
drivers/dma/sh/rz-dmac.c:770:9: note: ‘sprintf’ output between 4 and 13 bytes into a destination of size 5
  770 |         sprintf(pdev_irqname, "ch%u", index);
      |         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

While at it use scnprintf() instead of sprintf() to make the code
more robust.

Signed-off-by: Lad Prabhakar 
Reviewed-by: Geert Uytterhoeven 
Link: https://lore.kernel.org/r/20240110222717.193719-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Vinod Koul

dmaengine: imx-sdma: fix Excess kernel-doc warnings

2024-01-19T11:35:04+00:00

Fix warnings of "Excess struct member" by removing those lines.
They are extraneous.

imx-sdma.c:467: warning: Excess struct member 'context_loaded' description in 'sdma_channel'
imx-sdma.c:467: warning: Excess struct member 'bd_pool' description in 'sdma_channel'
imx-sdma.c:500: warning: Excess struct member 'script_addrs' description in 'sdma_firmware_header'

Signed-off-by: Randy Dunlap 
Cc: Sascha Hauer 
Cc: Shawn Guo 
Cc: Vinod Koul 
Cc: dmaengine@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20240119032832.4051-1-rdunlap@infradead.org
Signed-off-by: Vinod Koul

dmaengine: xilinx: xdma: Fix initialization location of desc in xdma_channel_isr()

2024-01-19T11:34:02+00:00

Clang warns (or errors with CONFIG_WERROR=y):

  drivers/dma/xilinx/xdma.c:894:3: error: variable 'desc' is uninitialized when used here [-Werror,-Wuninitialized]
    894 |                 desc->error = true;
        |                 ^~~~

The initialization of desc was moved too far forward, move it back so
that this assignment does not result in a potential crash at runtime
while clearing up the warning.

Closes: https://github.com/ClangBuiltLinux/linux/issues/1972
Fixes: 2f8f90cd2f8d ("dmaengine: xilinx: xdma: Implement interleaved DMA transfers")
Signed-off-by: Nathan Chancellor 
Link: https://lore.kernel.org/r/20231222-dma-xilinx-xdma-clang-fixes-v1-2-84a18ff184d2@kernel.org
Signed-off-by: Vinod Koul

dmaengine: xilinx: xdma: Fix operator precedence in xdma_prep_interleaved_dma()

2024-01-19T11:34:02+00:00

Clang warns (or errors with CONFIG_WERROR=y):

  drivers/dma/xilinx/xdma.c:757:68: error: operator '?:' has lower precedence than '+'; '+' will be evaluated first [-Werror,-Wparentheses]
    757 |                 src_addr += dmaengine_get_src_icg(xt, &xt->sgl[i]) + xt->src_inc ?
        |                             ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ^
  drivers/dma/xilinx/xdma.c:757:68: note: place parentheses around the '+' expression to silence this warning
    757 |                 src_addr += dmaengine_get_src_icg(xt, &xt->sgl[i]) + xt->src_inc ?
        |                                                                                  ^
        |                             (                                                   )
  drivers/dma/xilinx/xdma.c:757:68: note: place parentheses around the '?:' expression to evaluate it first
    757 |                 src_addr += dmaengine_get_src_icg(xt, &xt->sgl[i]) + xt->src_inc ?
        |                                                                                  ^
        |                                                                      (
    758 |                                                               xt->sgl[i].size : 0;
        |
        |                                                                                  )
  drivers/dma/xilinx/xdma.c:759:68: error: operator '?:' has lower precedence than '+'; '+' will be evaluated first [-Werror,-Wparentheses]
    759 |                 dst_addr += dmaengine_get_dst_icg(xt, &xt->sgl[i]) + xt->dst_inc ?
        |                             ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ^
  drivers/dma/xilinx/xdma.c:759:68: note: place parentheses around the '+' expression to silence this warning
    759 |                 dst_addr += dmaengine_get_dst_icg(xt, &xt->sgl[i]) + xt->dst_inc ?
        |                                                                                  ^
        |                             (                                                   )
  drivers/dma/xilinx/xdma.c:759:68: note: place parentheses around the '?:' expression to evaluate it first
    759 |                 dst_addr += dmaengine_get_dst_icg(xt, &xt->sgl[i]) + xt->dst_inc ?
        |                                                                                  ^
        |                                                                      (
    760 |                                                               xt->sgl[i].size : 0;
        |
        |                                                                                  )

The src_inc and dst_inc members of 'struct dma_interleaved_template' are
booleans, so it does not make sense for the addition to happen first.
Wrap the conditional operator in parantheses so it is evaluated first.

Closes: https://github.com/ClangBuiltLinux/linux/issues/1971
Fixes: 2f8f90cd2f8d ("dmaengine: xilinx: xdma: Implement interleaved DMA transfers")
Signed-off-by: Nathan Chancellor 
Link: https://lore.kernel.org/r/20231222-dma-xilinx-xdma-clang-fixes-v1-1-84a18ff184d2@kernel.org
Signed-off-by: Vinod Koul