dma_addr_t may be defined as 32 or 64 bit depending on configuration,
so it cannot be printed using the normal format strings, as
gcc correctly warns:

drivers/dma/at_hdmac.c: In function 'atc_prep_dma_interleaved':
drivers/dma/at_hdmac.c:731:28: warning: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'dma_addr_t {aka long long unsigned int}' [-Wformat=]

This changes the format strings to use the special "%pad" format
string that prints a dma_addr_t, and changes the arguments so we
pass the address by reference as required.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

dma_addr_t may be defined as 32 or 64 bit depending on configuration,
so it cannot be printed using the normal format strings, as
gcc correctly warns:

drivers/dma/at_xdmac.c: In function 'at_xdmac_interleaved_queue_desc':
drivers/dma/at_xdmac.c:922:51: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t {aka long long unsigned int}' [-Wformat=]

This changes the format strings to use the special "%pad" format
string that prints a dma_addr_t, and changes the arguments so we
pass the address by reference as required.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

The sdma_probe function will call sdma_event_remap, but sdma_event_remap
marked with the __init annotation which make the kbuild complains as the
following log:

WARNING: drivers/dma/built-in.o(.text+0x56fc): Section mismatch in reference
from the function sdma_probe() to the function .init.text:sdma_event_remap()
The function sdma_probe() references
the function __init sdma_event_remap().
This is often because sdma_probe lacks a __init
annotation or the annotation of sdma_event_remap is wrong.

Remove the __init annotation on sdma_event_remap to kill this build warning

Signed-off-by: Jason Liu <r64343@freescale.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

The current code uses bits 0-2 instead of 4-6 as the comment says.

Fixes: 633e42b8c546 ('dmaengine: edma: Get qDMA channel information from HW also')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

During the edma rework, a build error was introduced for the
case that CONFIG_OF is disabled:

drivers/built-in.o: In function `edma_tc_set_pm_state':
:(.text+0x43bf0): undefined reference to `of_find_device_by_node'

As the edma_tc_set_pm_state() function does nothing in case
we are running without OF, this adds an IS_ENABLED() check
that turns the function into an empty stub then and avoids the
link error.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: ca304fa9bb76 ("ARM/dmaengine: edma: Public API to use private struct pointer")
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

If the call to pm_runtime_get_sync() failed, Runtime PM was left
enabled.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

If CONFIG_PREEMPT=y:

    Unable to handle kernel NULL pointer dereference at virtual address 00000014
    pgd = c0003000
    [00000014] *pgd=80000040004003, *pmd=00000000
    Internal error: Oops: 206 [#1] PREEMPT SMP ARM
    Modules linked in:
    CPU: 0 PID: 17 Comm: kworker/0:1 Tainted: G        W       4.3.0-rc3-koelsch-022
    71-g705498fc5e6a5da8-dirty #1789
    Hardware name: Generic R8A7791 (Flattened Device Tree)
    Workqueue: pm pm_runtime_work
    task: ef578e40 ti: ef57a000 task.ti: ef57a000
    PC is at usb_dmac_chan_halt+0xc/0xc0
    LR is at usb_dmac_runtime_suspend+0x28/0x38
    pc : [<c023c880>]    lr : [<c023c95c>]    psr: 80000113
    sp : ef57bdf8  ip : 00000008  fp : 00000003
    r10: 00000008  r9 : c06ab928  r8 : ef49e810
    r7 : 00000000  r6 : 000000ac  r5 : ef770010  r4 : 00000000
    r3 : 00000000  r2 : 8ffc2b84  r1 : 00000000  r0 : ef770010
    Flags: Nzcv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
    Control: 30c5307d  Table: 40003000  DAC: fffffffd
    Process kworker/0:1 (pid: 17, stack limit = 0xef57a210)
    Stack: (0xef57bdf8 to 0xef57c000)

    [...

    [<c023c880>] (usb_dmac_chan_halt) from [<c023c95c>] (usb_dmac_runtime_suspend+0x28/0x38)
    [<c023c95c>] (usb_dmac_runtime_suspend) from [<c027b25c>] (pm_genpd_runtime_suspend+0x74/0x23c)

This happens because usb_dmac_probe() calls pm_runtime_put() before
usb_dmac_chan_probe(), leading to the device being suspended before the
DMA channels are initialized, causing a NULL pointer dereference.

Move the call to pm_runtime_put() to the end of usb_dmac_probe() to fix
this.

Add a check to usb_dmac_runtime_suspend() to prevent the crash from
happening in the error path.

Reported-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

Pull dmaengine updates from Vinod Koul:
 "This time we have a very typical update which is mostly fixes and
  updates to drivers and no new drivers.

   - the biggest change is coming from Peter for edma cleanup which even
     caused some last minute regression, things seem settled now
   - idma64 and dw updates
   - iotdma updates
   - module autoload fixes for various drivers
   - scatter gather support for hdmac"

* tag 'dmaengine-4.4-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (77 commits)
  dmaengine: edma: Add dummy driver skeleton for edma3-tptc
  Revert "ARM: DTS: am33xx: Use the new DT bindings for the eDMA3"
  Revert "ARM: DTS: am437x: Use the new DT bindings for the eDMA3"
  dmaengine: dw: some Intel devices has no memcpy support
  dmaengine: dw: platform: provide platform data for Intel
  dmaengine: dw: don't override platform data with autocfg
  dmaengine: hdmac: Add scatter-gathered memset support
  dmaengine: hdmac: factorise memset descriptor allocation
  dmaengine: virt-dma: Fix kernel-doc annotations
  ARM: DTS: am437x: Use the new DT bindings for the eDMA3
  ARM: DTS: am33xx: Use the new DT bindings for the eDMA3
  dmaengine: edma: New device tree binding
  dmaengine: Kconfig: edma: Select TI_DMA_CROSSBAR in case of ARCH_OMAP
  dmaengine: ti-dma-crossbar: Add support for crossbar on AM33xx/AM43xx
  dmaengine: edma: Merge the of parsing functions
  dmaengine: edma: Do not allocate memory for edma_rsv_info in case of DT boot
  dmaengine: edma: Refactor the dma device and channel struct initialization
  dmaengine: edma: Get qDMA channel information from HW also
  dmaengine: edma: Merge map_dmach_to_queue into assign_channel_eventq
  dmaengine: edma: Correct PaRAM access function names (_parm_ to _param_)
  ...

Pull char/misc driver updates from Greg KH:
 "Here is the big char/misc driver update for 4.4-rc1.  Lots of
  different driver and subsystem updates, hwtracing being the largest
  with the addition of some new platforms that are now supported.  Full
  details in the shortlog.

  All of these have been in linux-next for a long time with no reported
  issues"

* tag 'char-misc-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (181 commits)
  fpga: socfpga: Fix check of return value of devm_request_irq
  lkdtm: fix ACCESS_USERSPACE test
  mcb: Destroy IDA on module unload
  mcb: Do not return zero on error path in mcb_pci_probe()
  mei: bus: set the device name before running fixup
  mei: bus: use correct lock ordering
  mei: Fix debugfs filename in error output
  char: ipmi: ipmi_ssif: Replace timeval with timespec64
  fpga: zynq-fpga: Fix issue with drvdata being overwritten.
  fpga manager: remove unnecessary null pointer checks
  fpga manager: ensure lifetime with of_fpga_mgr_get
  fpga: zynq-fpga: Change fw format to handle bin instead of bit.
  fpga: zynq-fpga: Fix unbalanced clock handling
  misc: sram: partition base address belongs to __iomem space
  coresight: etm3x: adding documentation for sysFS's cpu interface
  vme: 8-bit status/id takes 256 values, not 255
  fpga manager: Adding FPGA Manager support for Xilinx Zynq 7000
  ARM: zynq: dt: Updated devicetree for Zynq 7000 platform.
  ARM: dt: fpga: Added binding docs for Xilinx Zynq FPGA manager.
  ver_linux: proc/modules, limit text processing to 'sed'
  ...

Pull tty/serial driver updates from Greg KH:
 "Here is the big tty and serial driver update for 4.4-rc1.

  Lots of serial driver updates and a few small tty core changes.  Full
  details in the shortlog.

  All of these have been in linux-next for a while"

* tag 'tty-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (148 commits)
  tty: Use unbound workqueue for all input workers
  tty: Abstract tty buffer work
  tty: Prevent tty teardown during tty_write_message()
  tty: core: Use correct spinlock flavor in tiocspgrp()
  tty: Combine SIGTTOU/SIGTTIN handling
  serial: amba-pl011: fix incorrect integer size in pl011_fifo_to_tty()
  ttyFDC: Fix build problems due to use of module_{init,exit}
  tty: remove unneeded return statement
  serial: 8250_mid: add support for DMA engine handling from UART MMIO
  dmaengine: hsu: remove platform data
  dmaengine: hsu: introduce stubs for the exported functions
  dmaengine: hsu: make the UART driver in control of selecting this driver
  serial: fix mctrl helper functions
  serial: 8250_pci: Intel MID UART support to its own driver
  serial: fsl_lpuart: add earlycon support
  tty: disable unbind for old 74xx based serial/mpsc console port
  serial: pl011: Spelling s/clocks-names/clock-names/
  n_tty: Remove reader wakeups for TTY_BREAK/TTY_PARITY chars
  tty: synclink, fix indentation
  serial: at91, fix rs485 properties
  ...