* 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: drop experimental status for ARM_PATCH_PHYS_VIRT
  ARM: 7008/1: alignment: Make SIGBUS sent to userspace POSIXly correct
  ARM: 7007/1: alignment: Prevent ignoring of faults with ARMv6 unaligned access model
  ARM: 7010/1: mm: fix invalid loop for poison_init_mem
  ARM: 7005/1: freshen up mm/proc-arm946.S
  dmaengine: PL08x: Fix trivial build error
  ARM: Fix build error for SMP=n builds

Something changed during the 3.1 merge window in the include files
which now causes the pl08x DMA engine driver to fail to build.  Fix
this by adding the now necessary dma-mapping.h include:

drivers/dma/amba-pl08x.c: In function ■pl08x_unmap_buffers■:
drivers/dma/amba-pl08x.c:1524: error: implicit declaration of function ■dma_unmap_single■
drivers/dma/amba-pl08x.c:1527: error: implicit declaration of function ■dma_unmap_page■

Acked-by: Vinod Koul <vinod.koul@intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx:
  dmaengine: use DEFINE_IDR for static initialization
  ioat: fix xor_idx_to_desc
  Avoid section type conflict in dma/ioat/dma_v3.c
  ioat: Adding PCI IDs for IOAT devices on SandyBridge platforms

We could use DEFINE_IDR for statically allocated idr
that allow us to save a few lines of code.

And also remove unneeded mutex_init() for dma_list_mutex, as
dma_list_mutex is initialized automatically by DEFINE_MUTEX().

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

For versions of the device that implement operation-types 0x87, 0x88
(IOAT_OP_XOR, IOAT_OP_XOR_VAL) this map determines whether a given
source is located in the base or extended descriptor.  Source addresses
6 through 8 require an extended descriptor, hence 0xe0, not 0xd0.  No
shipping hardware currently implements these operation types.

Reported-by: Evgueni Smogailov <evgueni.smogailov@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

* 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (37 commits)
  Improve slave/cyclic DMA engine documentation
  dmaengine: pl08x: handle the rest of enums in pl08x_width
  DMA: PL08x: cleanup selection of burst size
  DMA: PL08x: avoid recalculating cctl at each prepare
  DMA: PL08x: cleanup selection of buswidth
  DMA: PL08x: constify plchan->cd and plat->slave_channels
  DMA: PL08x: separately store source/destination cctl
  DMA: PL08x: separately store source/destination slave address
  DMA: PL08x: clean up LLI debugging
  DMA: PL08x: select LLI bus only once per LLI setup
  DMA: PL08x: remove unused constants
  ARM: mxs-dma: reset after disable channel
  dma: intel_mid_dma: remove redundant pci_set_drvdata calls
  dma: mxs-dma: fix unterminated platform_device_id table
  dmaengine: pl330: make platform data optional
  dmaengine: imx-sdma: return proper error if kzalloc fails
  pch_dma: Fix CTL register access issue
  dmaengine: mxs-dma: skip request_irq for NO_IRQ
  dmaengine/coh901318: fix slave submission semantics
  dmaengine/ste_dma40: allow memory buswidth/burst to be configured
  ...

Fix trivial whitespace conflict in drivers/dma/mv_xor.c

* 'sh-latest' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-3.x: (39 commits)
  SH: static should be at beginning of declaration
  sh: move CLKDEV_xxx_ID macro to sh_clk.h
  sh: clock-shx3: add CLKDEV_ICK_ID for cleanup
  sh: clock-sh7786: add CLKDEV_ICK_ID for cleanup
  sh: clock-sh7785: add CLKDEV_ICK_ID for cleanup
  sh: clock-sh7757: add CLKDEV_ICK_ID for cleanup
  sh: clock-sh7366: add CLKDEV_ICK_ID for cleanup
  sh: clock-sh7343: add CLKDEV_ICK_ID for cleanup
  sh: clock-sh7722: add CLKDEV_ICK_ID for cleanup
  sh: clock-sh7724: add CLKDEV_ICK_ID for cleanup
  sh: clock-sh7366: modify I2C clock settings
  sh: clock-sh7343: modify I2C clock settings
  sh: clock-sh7723: modify I2C clock settings
  sh: clock-sh7722: modify I2C clock settings
  sh: clock-sh7724: modify I2C clock settings
  serial: sh-sci: Fix up pretty name printing for port IRQs.
  serial: sh-sci: Kill off per-port enable/disable callbacks.
  serial: sh-sci: Add missing module description/author bits.
  serial: sh-sci: Regtype probing doesn't need to be fatal.
  sh: Tidy up pre-clkdev clk_get() error handling.
  ...

It adds device tree probe support for imx-sdma driver.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Vinod Koul <vinod.koul@intel.com>

It does not need to allocate space and copy fw_name in function
sdma_get_firmware().

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Vinod Koul <vinod.koul@intel.com>