linux.git/drivers/dma/ti, branch v6.5

Merge tag 'dmaengine-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine

2023-07-06T16:48:31+00:00

Pull dmaengine updates from Vinod Koul:
 "New support:
   - TI J721S2 CSI BCDMA support

  Updates:
   - Native HDMI support for dw edma driver
   - ste dma40 updates for supporting proper SRAM handle in DT
   - removal of dma device chancnt setting in drivers"

* tag 'dmaengine-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (28 commits)
  dmaengine: sprd: Don't set chancnt
  dmaengine: hidma: Don't set chancnt
  dmaengine: plx_dma: Don't set chancnt
  dmaengine: axi-dmac: Don't set chancnt
  dmaengine: dw-axi-dmac: Don't set chancnt
  dmaengine: qcom: bam_dma: allow omitting num-{channels,ees}
  dmaengine: dw-edma: Add HDMA DebugFS support
  dmaengine: dw-edma: Add support for native HDMA
  dmaengine: dw-edma: Create a new dw_edma_core_ops structure to abstract controller operation
  dmaengine: dw-edma: Rename dw_edma_core_ops structure to dw_edma_plat_ops
  dmaengine: ste_dma40: use proper format string for resource_size_t
  dmaengine: make QCOM_HIDMA depend on HAS_IOMEM
  dmaengine: ste_dma40: fix typo in enum documentation
  dmaengine: ste_dma40: use correct print specfier for resource_size_t
  MAINTAINERS: Add myself as the DW eDMA driver reviewer
  MAINTAINERS: Add Manivannan to DW eDMA driver maintainers list
  MAINTAINERS: Demote Gustavo Pimentel to DW EDMA driver reviewer
  dmaengine: ti: k3-udma: Add support for J721S2 CSI BCDMA instance
  dt-bindings: dma: ti: Add J721S2 BCDMA
  dmaengine: ti: k3-psil-j721s2: Add PSI-L thread map for main CPSW2G
  ...

dmaengine: ti: k3-udma: annotate pm function with __maybe_unused

2023-05-17T06:45:47+00:00

We get a warning when PM is not set:

../drivers/dma/ti/k3-udma.c:5552:12: warning: 'udma_pm_resume' defined but not used [-Wunused-function]
 5552 | static int udma_pm_resume(struct device *dev)
      |            ^~~~~~~~~~~~~~
../drivers/dma/ti/k3-udma.c:5530:12: warning: 'udma_pm_suspend' defined but not used [-Wunused-function]
 5530 | static int udma_pm_suspend(struct device *dev)
      |            ^~~~~~~~~~~~~~~

Fix this by annotating pm function with __maybe_unused

Fixes: fbe05149e40b ("dmaengine: ti: k3-udma: Add system suspend/resume support")
Reported-by: Randy Dunlap 
Signed-off-by: Vinod Koul 
Acked-by: Randy Dunlap 
Tested-by: Randy Dunlap  # build-tested
Link: https://lore.kernel.org/r/20230516174311.117264-1-vkoul@kernel.org
Signed-off-by: Vinod Koul

dmaengine: ti: k3-udma: Add support for J721S2 CSI BCDMA instance

2023-05-16T17:55:52+00:00

J721S2 has dedicated BCDMA instance for Camera Serial Interface RX
and TX. The BCDMA instance supports RX and TX channels but block copy
channels are not present, add support for the same.

Signed-off-by: Vaishnav Achath 
Link: https://lore.kernel.org/r/20230505143929.28131-3-vaishnav.a@ti.com
Signed-off-by: Vinod Koul

dmaengine: ti: k3-psil-j721s2: Add PSI-L thread map for main CPSW2G

2023-05-16T17:51:29+00:00

Add PSI-L thread map for main CPSW2G.

Signed-off-by: Kishon Vijay Abraham I 
Signed-off-by: Siddharth Vadapalli 
Acked-by: Peter Ujfalusi 
Link: https://lore.kernel.org/r/20230511034704.656155-1-s-vadapalli@ti.com
Signed-off-by: Vinod Koul

dmaengine: ti: k3-psil: Add PSI-L thread support for J784s4

2023-03-31T12:47:06+00:00

Add psil thread IDs for J784s4 and include J784s4 in the set of
"k3_soc_devices" in k3-psil.c.

Signed-off-by: Apurva Nandan 
Signed-off-by: Hari Nagalla 
Signed-off-by: Siddharth Vadapalli 
Signed-off-by: Vignesh Raghavendra 
[vaishnav.a@ti.com: add MCSPI-TX and 3rd CSI2RX instance entries]
Signed-off-by: Vaishnav Achath 
[j-choudhary@ti.com: add sa2ul entries, minor cleanups]
Signed-off-by: Jayesh Choudhary 
Acked-by: Peter Ujfalusi 
Link: https://lore.kernel.org/r/20230308201513.116638-1-j-choudhary@ti.com
Signed-off-by: Vinod Koul

dmaengine: ti: edma: remove unused edma_and function

2023-03-31T12:27:49+00:00

clang with W=1 reports
drivers/dma/ti/edma.c:321:20: error: unused function
  'edma_and' [-Werror,-Wunused-function]
static inline void edma_and(struct edma_cc *ecc, int offset, unsigned and)
                   ^
This function is not used, so remove it.

Signed-off-by: Tom Rix 
Link: https://lore.kernel.org/r/20230320231209.1728940-1-trix@redhat.com
Signed-off-by: Vinod Koul

dmaengine: ti: k3-udma: Workaround errata i2234

2023-03-31T12:19:36+00:00

Per [1], UDMA TR15 transactions may hang if ICNT0 is less than 64B
Work around is to set EOL flag is to 1 for ICNT0.

Since, there is no performance penalty / side effects of setting EOL
flag event ICNTO > 64B, just set the flag for all UDMAP TR15
descriptors.

[1] https://www.ti.com/lit/er/sprz455a/sprz455a.pdf
Errata doc for J721E DRA829/TDA4VM Processors Silicon Revision 1.1/1.0
(Rev. A)

Signed-off-by: Vignesh Raghavendra 
[j-choudhary@ti.com: minor cleanups]
Signed-off-by: Jayesh Choudhary 
Link: https://lore.kernel.org/r/20230323120107.27638-1-j-choudhary@ti.com
Signed-off-by: Vinod Koul

dmaengine: ti: k3-udma: Add system suspend/resume support

2023-03-31T08:06:00+00:00

The K3 platforms configure the DMA resources with the
help of the TI's System Firmware's Device Manager(DM)
over TISCI. The group of DMA related Resource Manager[1]
TISCI messages includes: INTA, RINGACC, UDMAP, and PSI-L.
This configuration however, does not persist in the DM
after leaving from Suspend-to-RAM state. We have to restore
the DMA channel configuration over TISCI for all configured
channels when returning from suspend.

The TISCI resource management calls for each DMA type (UDMA,
PKTDMA, BCDMA) happen in device_free_chan_resources() and
device_alloc_chan_resources(). In pm_suspend() we store
the current udma_chan_config for channels that still have
attached clients and call device_free_chan_resources().
In pm_resume() restore the udma_channel_config from backup
and call device_alloc_chan_resources() for those channels.

Drivers like CPSW that use k3-udma-glue already do their own
DMA resource management so use the late system suspend/resume hooks.

[1] https://software-dl.ti.com/tisci/esd/latest/2_tisci_msgs/index.html#resource-management-rm

Signed-off-by: Vignesh Raghavendra 
[g-vlaev@ti.com: Add patch description and config backup]
[g-vlaev@ti.com: Supend only channels with clients]
Signed-off-by: Georgi Vlaev 
Acked-by: Peter Ujfalusi 
Link: https://lore.kernel.org/r/20230329155349.2566010-1-vigneshr@ti.com
Signed-off-by: Vinod Koul

Merge tag 'dmaengine-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine

2023-02-25T01:18:54+00:00

Pull dmaengine updates from Vinod Koul:
 "A new driver, couple of device support and binding conversion along
  with bunch of driver updates are the main features of this.

  New hardware support:

   - TI AM62Ax controller support

   - Xilinx xdma driver

   - Qualcomm SM6125, SM8550, QDU1000/QRU1000 GPI controller

  Updates:

   - Runtime pm support for at_xdmac driver

   - IMX sdma binding conversion to yaml and HDMI audio support

   - IMX mxs binding conversion to yaml"

* tag 'dmaengine-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (35 commits)
  dmaengine: idma64: Update bytes_transferred field
  dmaengine: imx-sdma: Set DMA channel to be private
  dmaengine: dw: Move check for paused channel to dwc_get_residue()
  dmaengine: ptdma: check for null desc before calling pt_cmd_callback
  dmaengine: dw-axi-dmac: Do not dereference NULL structure
  dmaengine: idxd: Fix default allowed read buffers value in group
  dmaengine: sf-pdma: pdma_desc memory leak fix
  dmaengine: Simplify dmaenginem_async_device_register() function
  dmaengine: use sysfs_emit() to instead of scnprintf()
  dmaengine: Make an order in struct dma_device definition
  dt-bindings: dma: cleanup examples - indentation, lowercase hex
  dt-bindings: dma: drop unneeded quotes
  dmaengine: xilinx: xdma: Add user logic interrupt support
  dmaengine: xilinx: xdma: Add xilinx xdma driver
  dmaengine: drivers: Use devm_platform_ioremap_resource()
  dmaengine: at_xdmac: remove empty line
  dmaengine: at_xdmac: add runtime pm support
  dmaengine: at_xdmac: align properly function members
  dmaengine: ppc4xx: Convert to use sysfs_emit()/sysfs_emit_at() APIs
  dmaengine: sun6i: Set the maximum segment size
  ...

dmaengine: drivers: Use devm_platform_ioremap_resource()

2023-01-18T16:46:47+00:00

platform_get_resource() and devm_ioremap_resource() are wrapped up in the
devm_platform_ioremap_resource() helper. Use the helper and get rid of the
local variable for struct resource *. We now have a function call less.

Signed-off-by: Tudor Ambarus 
Acked-by: Jernej Skrabec 
Acked-by: Peter Ujfalusi 
Link: https://lore.kernel.org/r/20221110152528.7821-1-tudor.ambarus@microchip.com
Signed-off-by: Vinod Koul