When devm_kcalloc fails, it forgets to call edma_free_slot.
Replace direct return with failure handler to fix it.

Fixes: 1be5336bc7ba ("dmaengine: edma: New device tree binding")
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Link: https://lore.kernel.org/r/20191118073802.28424-1-hslester96@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

Like paRAM slots, channels could be used by other cores and in this case
we need to make sure that the driver do not alter these channels.

Handle the generic dma-channel-mask property to mark channels in a bitmap
which can not be used by Linux and convert the legacy rsv_chans if it is
provided by platform_data.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20191025073056.25450-4-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

Yegor Yefremov <yegorslists@googlemail.com> reported that musb and ftdi
uart can fail for the first open of the uart unless connected using
a hub.

This is because the first dma call done by musb_ep_program() must wait
if cppi41 is PM runtime suspended. Otherwise musb_ep_program() continues
with other non-dma packets before the DMA transfer is started causing at
least ftdi uarts to fail to receive data.

Let's fix the issue by waking up cppi41 with PM runtime calls added to
cppi41_dma_prep_slave_sg() and return NULL if still idled. This way we
have musb_ep_program() continue with PIO until cppi41 is awake.

Fixes: fdea2d09b997 ("dmaengine: cppi41: Add basic PM runtime support")
Reported-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Cc: stable@vger.kernel.org # v4.9+
Link: https://lore.kernel.org/r/20191023153138.23442-1-tony@atomide.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

drivers/dma/ti/edma.c: In function edma_probe:
drivers/dma/ti/edma.c:2252:11: warning:
 variable off set but not used [-Wunused-but-set-variable]

'off' is not used now, so remove it.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20190905060249.23928-1-yuehaibing@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

Pull dmaengine updates from Vinod Koul:

 - Move Dmaengine DT bindings to YAML and convert Allwinner to schema.

 - FSL dma device_synchronize implementation

 - DW split acpi and of helpers and updates to driver and support for
   Elkhart Lake

 - Move filter fn as private for omap-dma and edma drivers and
   improvements to these drivers

 - Mark expected switch fall-through in couple of drivers

 - Renames of shdma and nbpfaxi binding document

 - Minor updates to bunch of drivers

* tag 'dmaengine-5.4-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (55 commits)
  dmaengine: ti: edma: Use bitmap_set() instead of open coded edma_set_bits()
  dmaengine: ti: edma: Only reset region0 access registers
  dmaengine: ti: edma: Do not reset reserved paRAM slots
  dmaengine: iop-adma.c: fix printk format warning
  dmaengine: stm32-dma: Use struct_size() helper
  dt-bindings: dmaengine: dma-common: Fix the dma-channel-mask property
  dmanegine: ioat/dca: Use struct_size() helper
  dmaengine: iop-adma: remove set but not used variable 'slots_per_op'
  dmaengine: dmatest: Add support for completion polling
  dmaengine: ti: omap-dma: Remove variable override in omap_dma_tx_status()
  dmaengine: ti: omap-dma: Remove 'Assignment in if condition'
  dmaengine: ti: edma: Remove 'Assignment in if condition'
  dmaengine: dw: platform: Split OF helpers to separate module
  dmaengine: dw: platform: Split ACPI helpers to separate module
  dmaengine: dw: platform: Move handle check to dw_dma_acpi_controller_register()
  dmaengine: dw: platform: Switch to acpi_dma_controller_register()
  dmaengine: dw: platform: Use devm_platform_ioremap_resource()
  dmaengine: dw: platform: Enable iDMA 32-bit on Intel Elkhart Lake
  dmaengine: dw: platform: Use struct dw_dma_chip_pdata
  dmaengine: dw: Export struct dw_dma_chip_pdata for wider use
  ...

bitmap_set() is the standard way of setting an area in the bitfield.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20190823125618.8133-4-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

Region0 is used by Linux, do not reset other registers controlling access
for other shadow regions.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20190823125618.8133-3-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

Skip resetting paRAM slots marked as reserved as they might be used by
other cores.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20190823125618.8133-2-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

There is no need to fetch local omap_desc since the desc we have is the
correct one already when we need to check the channel status.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20190730132029.2971-1-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>