The CSI2RX subsystem on J721E is serviced by UDMA via PSI-L to transfer frames to memory. It can have up to 32 threads per instance. J721E has two instances of the subsystem, so there are 64 threads total. Add them to the endpoint map. Signed-off-by: Pratyush Yadav <p.yadav@ti.com> Acked-by: Peter Ujfalusi <peter.ujflausi@gmail.com> Link: https://lore.kernel.org/r/20210819110106.31409-1-p.yadav@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
Fix the following fallthrough warning: drivers/dma/ti/k3-udma.c:4951:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] Reported-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
There's no need to restore DMA context on CPU_CLUSTER_PM_ENTER_FAILED as the DMA context won't be lost on errors. Note that this does not cause invalid context restore as we already check for busy DMA with omap_dma_busy() in CPU_CLUSTER_PM_ENTER, and block any deeper idle states for the SoC by returning NOTIFY_BAD if busy. If other drivers block deeper idle states with cpu_pm, we now just do a pointless restore, but only if dma was not busy on CPU_CLUSTER_PM_ENTER. Let's update the CPU_CLUSTER_PM_ENTER_FAILED handling for correctness, and add a comment. Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Adam Ford <aford173@gmail.com> Cc: Andreas Kemnade <andreas@kemnade.info> Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com> Link: https://lore.kernel.org/r/20210518074347.16908-1-tony@atomide.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
Pull dmaengine updates from Vinod Koul: "We have couple of drivers removed a new driver and bunch of new device support and few updates to drivers for this round. New drivers/devices: - Intel LGM SoC DMA driver - Actions Semi S500 DMA controller - Renesas r8a779a0 dma controller - Ingenic JZ4760(B) dma controller - Intel KeemBay AxiDMA controller Removed: - Coh901318 dma driver - Zte zx dma driver - Sirfsoc dma driver Updates: - mmp_pdma, mmp_tdma gained module support - imx-sdma become modern and dropped platform data support - dw-axi driver gained slave and cyclic dma support" * tag 'dmaengine-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (58 commits) dmaengine: dw-axi-dmac: remove redundant null check on desc dmaengine: xilinx_dma: Alloc tx descriptors GFP_NOWAIT dmaengine: dw-axi-dmac: Virtually split the linked-list dmaengine: dw-axi-dmac: Set constraint to the Max segment size dmaengine: dw-axi-dmac: Add Intel KeemBay AxiDMA BYTE and HALFWORD registers dmaengine: dw-axi-dmac: Add Intel KeemBay AxiDMA handshake dmaengine: dw-axi-dmac: Add Intel KeemBay AxiDMA support dmaengine: drivers: Kconfig: add HAS_IOMEM dependency to DW_AXI_DMAC dmaengine: dw-axi-dmac: Add Intel KeemBay DMA register fields dt-binding: dma: dw-axi-dmac: Add support for Intel KeemBay AxiDMA dmaengine: dw-axi-dmac: Support burst residue granularity dmaengine: dw-axi-dmac: Support of_dma_controller_register() dmaegine: dw-axi-dmac: Support device_prep_dma_cyclic() dmaengine: dw-axi-dmac: Support device_prep_slave_sg dmaengine: dw-axi-dmac: Add device_config operation dmaengine: dw-axi-dmac: Add device_synchronize() callback dmaengine: dw-axi-dmac: move dma_pool_create() to alloc_chan_resources() dmaengine: dw-axi-dmac: simplify descriptor management dt-bindings: dma: Add YAML schemas for dw-axi-dmac dmaengine: ti: k3-psil: optimize struct psil_endpoint_config for size ...
In 'dma_pool_create()', we return -ENOMEM, but don't release the resources
already allocated, as in all the other error handling paths.
Go to 'err_res_free' instead of returning directly.
Fixes: 017794739702 ("dmaengine: ti: k3-udma: Initial support for K3 BCDMA")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20210124070923.724479-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The ret does not need to be initialized to 0 in the tisci channel config functions. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@gmail.com> Link: https://lore.kernel.org/r/20210113114923.9231-4-peter.ujfalusi@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
The UDMA and BCDMA can provide higher throughput if the burst_size of the channel is changed from it's default (which is 64 bytes) for Ultra-high and high capacity channels. This performance benefit is even more visible when the buffers are aligned with the burst_size configuration. The am654 does not have a way to change the burst size, but it is using 64 bytes burst, so increasing the copy_align from 8 bytes to 64 (and clients taking that into account) can increase the throughput as well. Numbers gathered on j721e: echo 8000000 > /sys/module/dmatest/parameters/test_buf_size echo 2000 > /sys/module/dmatest/parameters/timeout echo 50 > /sys/module/dmatest/parameters/iterations echo 1 > /sys/module/dmatest/parameters/max_channels Prior this patch: ~1.3 GB/s After this patch: ~1.8 GB/s with 1 byte alignment: ~1.7 GB/s Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@gmail.com> Tested-by: Kishon Vijay Abraham I <kishon@ti.com> Link: https://lore.kernel.org/r/20210113114923.9231-3-peter.ujfalusi@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
BCDMA RX channels have one flow per channel, therefore set the rflow_cnt
to rchan_cnt.
Without this patch, request for BCDMA RX channel allocation fails as
rflow_cnt is 0 thus fails to reserve a rflow for the channel.
Fixes: 8844898028d4 ("dmaengine: ti: k3-udma: Add support for BCDMA channel TPL handling")
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20210112141403.30286-1-vigneshr@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Instead of initializing the rchan_tpl the initial commit re-initialized
the tchan_tpl.
Fixes: d2abc982333c0 ("dmaengine: ti: k3-udma: Initial support for K3 PKTDMA")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20201216154833.20821-1-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Pull dmaengine updates from Vinod Koul: "The last dmaengine updates for this year :) This contains couple of new drivers, new device support and updates to bunch of drivers. New drivers/devices: - Qualcomm ADM driver - Qualcomm GPI driver - Allwinner A100 DMA support - Microchip Sama7g5 support - Mediatek MT8516 apdma Updates: - more updates to idxd driver and support for IAX config - runtime PM support for dw driver - TI drivers" * tag 'dmaengine-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (75 commits) soc: ti: k3-ringacc: Use correct error casting in k3_ringacc_dmarings_init dmaengine: ti: k3-udma-glue: Add support for K3 PKTDMA dmaengine: ti: k3-udma: Initial support for K3 PKTDMA dmaengine: ti: k3-udma: Add support for BCDMA channel TPL handling dmaengine: ti: k3-udma: Initial support for K3 BCDMA soc: ti: k3-ringacc: add AM64 DMA rings support. dmaengine: ti: Add support for k3 event routers dmaengine: ti: k3-psil: Add initial map for AM64 dmaengine: ti: k3-psil: Extend psil_endpoint_config for K3 PKTDMA dt-bindings: dma: ti: Add document for K3 PKTDMA dt-bindings: dma: ti: Add document for K3 BCDMA dmaengine: dmatest: Use dmaengine_get_dma_device dmaengine: doc: client: Update for dmaengine_get_dma_device() usage dmaengine: Add support for per channel coherency handling dmaengine: of-dma: Add support for optional router configuration callback dmaengine: ti: k3-udma-glue: Configure the dma_dev for rings dmaengine: ti: k3-udma-glue: Get the ringacc from udma_dev dmaengine: ti: k3-udma-glue: Add function to get device pointer for DMA API dmaengine: ti: k3-udma: Add support for second resource range from sysfw dmaengine: ti: k3-udma: Wait for peer teardown completion if supported ...