linux.git/drivers/dma/ti, branch v5.13

Merge tag 'dmaengine-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine

2021-02-23T23:05:10+00:00

Pull dmaengine updates from Vinod Koul:
 "We have couple of drivers removed a new driver and bunch of new device
  support and few updates to drivers for this round.

  New drivers/devices:
   - Intel LGM SoC DMA driver
   - Actions Semi S500 DMA controller
   - Renesas r8a779a0 dma controller
   - Ingenic JZ4760(B) dma controller
   - Intel KeemBay AxiDMA controller

  Removed:
   - Coh901318 dma driver
   - Zte zx dma driver
   - Sirfsoc dma driver

  Updates:
   - mmp_pdma, mmp_tdma gained module support
   - imx-sdma become modern and dropped platform data support
   - dw-axi driver gained slave and cyclic dma support"

* tag 'dmaengine-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (58 commits)
  dmaengine: dw-axi-dmac: remove redundant null check on desc
  dmaengine: xilinx_dma: Alloc tx descriptors GFP_NOWAIT
  dmaengine: dw-axi-dmac: Virtually split the linked-list
  dmaengine: dw-axi-dmac: Set constraint to the Max segment size
  dmaengine: dw-axi-dmac: Add Intel KeemBay AxiDMA BYTE and HALFWORD registers
  dmaengine: dw-axi-dmac: Add Intel KeemBay AxiDMA handshake
  dmaengine: dw-axi-dmac: Add Intel KeemBay AxiDMA support
  dmaengine: drivers: Kconfig: add HAS_IOMEM dependency to DW_AXI_DMAC
  dmaengine: dw-axi-dmac: Add Intel KeemBay DMA register fields
  dt-binding: dma: dw-axi-dmac: Add support for Intel KeemBay AxiDMA
  dmaengine: dw-axi-dmac: Support burst residue granularity
  dmaengine: dw-axi-dmac: Support of_dma_controller_register()
  dmaegine: dw-axi-dmac: Support device_prep_dma_cyclic()
  dmaengine: dw-axi-dmac: Support device_prep_slave_sg
  dmaengine: dw-axi-dmac: Add device_config operation
  dmaengine: dw-axi-dmac: Add device_synchronize() callback
  dmaengine: dw-axi-dmac: move dma_pool_create() to alloc_chan_resources()
  dmaengine: dw-axi-dmac: simplify descriptor management
  dt-bindings: dma: Add YAML schemas for dw-axi-dmac
  dmaengine: ti: k3-psil: optimize struct psil_endpoint_config for size
  ...

dmaengine: ti: k3-udma: Fix a resource leak in an error handling path

2021-01-26T17:31:32+00:00

In 'dma_pool_create()', we return -ENOMEM, but don't release the resources
already allocated, as in all the other error handling paths.

Go to 'err_res_free' instead of returning directly.

Fixes: 017794739702 ("dmaengine: ti: k3-udma: Initial support for K3 BCDMA")
Signed-off-by: Christophe JAILLET 
Acked-by: Peter Ujfalusi 
Link: https://lore.kernel.org/r/20210124070923.724479-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul

dmaengine: ti: k3-udma: Do not initialize ret in tisci channel config functions

2021-01-13T16:30:37+00:00

The ret does not need to be initialized to 0 in the tisci channel config
functions.

Signed-off-by: Peter Ujfalusi 
Link: https://lore.kernel.org/r/20210113114923.9231-4-peter.ujfalusi@gmail.com
Signed-off-by: Vinod Koul

dmaengine: ti: k3-udma: Add support for burst_size configuration for mem2mem

2021-01-13T16:30:37+00:00

The UDMA and BCDMA can provide higher throughput if the burst_size of the
channel is changed from it's default (which is 64 bytes) for Ultra-high
and high capacity channels.

This performance benefit is even more visible when the buffers are aligned
with the burst_size configuration.

The am654 does not have a way to change the burst size, but it is using
64 bytes burst, so increasing the copy_align from 8 bytes to 64 (and
clients taking that into account) can increase the throughput as well.

Numbers gathered on j721e:
echo 8000000 > /sys/module/dmatest/parameters/test_buf_size
echo 2000 > /sys/module/dmatest/parameters/timeout
echo 50 > /sys/module/dmatest/parameters/iterations
echo 1 > /sys/module/dmatest/parameters/max_channels

Prior this patch:       ~1.3 GB/s
After this patch:       ~1.8 GB/s
 with 1 byte alignment: ~1.7 GB/s

Signed-off-by: Peter Ujfalusi 
Signed-off-by: Peter Ujfalusi 
Tested-by: Kishon Vijay Abraham I 
Link: https://lore.kernel.org/r/20210113114923.9231-3-peter.ujfalusi@gmail.com
Signed-off-by: Vinod Koul

dmaengine: ti: k3-udma: Set rflow count for BCDMA split channels

2021-01-13T11:22:19+00:00

BCDMA RX channels have one flow per channel, therefore set the rflow_cnt
to rchan_cnt.

Without this patch, request for BCDMA RX channel allocation fails as
rflow_cnt is 0 thus fails to reserve a rflow for the channel.

Fixes: 8844898028d4 ("dmaengine: ti: k3-udma: Add support for BCDMA channel TPL handling")
Signed-off-by: Vignesh Raghavendra 
Acked-by: Peter Ujfalusi 
Link: https://lore.kernel.org/r/20210112141403.30286-1-vigneshr@ti.com
Signed-off-by: Vinod Koul

dmaengine: ti: k3-udma: Fix pktdma rchan TPL level setup

2020-12-29T04:37:59+00:00

Instead of initializing the rchan_tpl the initial commit re-initialized
the tchan_tpl.

Fixes: d2abc982333c0 ("dmaengine: ti: k3-udma: Initial support for K3 PKTDMA")
Signed-off-by: Peter Ujfalusi 
Link: https://lore.kernel.org/r/20201216154833.20821-1-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul

Merge tag 'dmaengine-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine

2020-12-17T20:52:23+00:00

Pull dmaengine updates from Vinod Koul:
 "The last dmaengine updates for this year :)

  This contains couple of new drivers, new device support and updates to
  bunch of drivers.

  New drivers/devices:
   - Qualcomm ADM driver
   - Qualcomm GPI driver
   - Allwinner A100 DMA support
   - Microchip Sama7g5 support
   - Mediatek MT8516 apdma

  Updates:
   - more updates to idxd driver and support for IAX config
   - runtime PM support for dw driver
   - TI drivers"

* tag 'dmaengine-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (75 commits)
  soc: ti: k3-ringacc: Use correct error casting in k3_ringacc_dmarings_init
  dmaengine: ti: k3-udma-glue: Add support for K3 PKTDMA
  dmaengine: ti: k3-udma: Initial support for K3 PKTDMA
  dmaengine: ti: k3-udma: Add support for BCDMA channel TPL handling
  dmaengine: ti: k3-udma: Initial support for K3 BCDMA
  soc: ti: k3-ringacc: add AM64 DMA rings support.
  dmaengine: ti: Add support for k3 event routers
  dmaengine: ti: k3-psil: Add initial map for AM64
  dmaengine: ti: k3-psil: Extend psil_endpoint_config for K3 PKTDMA
  dt-bindings: dma: ti: Add document for K3 PKTDMA
  dt-bindings: dma: ti: Add document for K3 BCDMA
  dmaengine: dmatest: Use dmaengine_get_dma_device
  dmaengine: doc: client: Update for dmaengine_get_dma_device() usage
  dmaengine: Add support for per channel coherency handling
  dmaengine: of-dma: Add support for optional router configuration callback
  dmaengine: ti: k3-udma-glue: Configure the dma_dev for rings
  dmaengine: ti: k3-udma-glue: Get the ringacc from udma_dev
  dmaengine: ti: k3-udma-glue: Add function to get device pointer for DMA API
  dmaengine: ti: k3-udma: Add support for second resource range from sysfw
  dmaengine: ti: k3-udma: Wait for peer teardown completion if supported
  ...

dmaengine: ti: k3-udma-glue: Add support for K3 PKTDMA

2020-12-11T15:50:10+00:00

This commit adds support for PKTDMA in k3-udma glue driver. Use new
psil_endpoint_config struct to get static data for a given channel or a
flow during setup.  Make sure that the RX flows being mapped to a RX
channel is within the range of flows that is been allocated to that RX
channel.

Signed-off-by: Vignesh Raghavendra 
Signed-off-by: Peter Ujfalusi 
Link: https://lore.kernel.org/r/20201208090440.31792-21-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul

dmaengine: ti: k3-udma: Initial support for K3 PKTDMA

2020-12-11T15:50:09+00:00

One of the DMAs introduced with AM64 is the Packet DMA (PKTDMA).
It serves similar purpose as K3 UDMAP channels in packet mode, but with
notable differences, like tflow support and channels being allocated to
service specific peripherals.
The rings for the PKTDMA is integrated within the DMA itself instead of
using rings from the general purpose ringacc.

PKTDMA can be used to service PSI-L peripherals, similarly to
K3 UDMA channels.

Most of the driver code can be reused for PKTDMA tchan/rchan support but
new setup and allocation functions are needed to handle the differences
between the DMAs.

Signed-off-by: Peter Ujfalusi 
Link: https://lore.kernel.org/r/20201208090440.31792-20-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul

dmaengine: ti: k3-udma: Add support for BCDMA channel TPL handling

2020-12-11T15:50:09+00:00

Unlike UDMAP the BCDMA defines the channel TPL levels per channel type.
In UDMAP the number of high and ultra-high channels applies to both tchan
and rchan.

BCDMA defines the TPL per channel types: bchan, tchan and rchan can have
different number of high and ultra-high channels.

In order to support BCDMA channel TPL we need to move the tpl information
as per channel type property for the DMAs.

Signed-off-by: Peter Ujfalusi 
Link: https://lore.kernel.org/r/20201208090440.31792-19-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul