linux.git/drivers/dma/sh, branch v4.1

dmaengine: usb-dmac: Protect PM-only functions to kill warning

2015-04-27T03:06:02+00:00

If CONFIG_PM=n:

    drivers/dma/sh/usb-dmac.c:677: warning: ‘usb_dmac_runtime_suspend’ defined but not used
    drivers/dma/sh/usb-dmac.c:688: warning: ‘usb_dmac_runtime_resume’ defined but not used

Protect the unused functions by #ifdef CONFIG_PM to fix this.

Signed-off-by: Geert Uytterhoeven 
Signed-off-by: Vinod Koul

Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma

2015-04-24T16:49:37+00:00

Pull slave-dmaengine updates from Vinod Koul:

 - new drivers for:
        - Ingenic JZ4780 controller
        - APM X-Gene controller
        - Freescale RaidEngine device
        - Renesas USB Controller

  - remove device_alloc_chan_resources dummy handlers

  - sh driver cleanups for peri peri and related emmc and asoc patches
    as well

  - fixes and enhancements spread over the drivers

* 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (59 commits)
  dmaengine: dw: don't prompt for DW_DMAC_CORE
  dmaengine: shdmac: avoid unused variable warnings
  dmaengine: fix platform_no_drv_owner.cocci warnings
  dmaengine: pch_dma: fix memory leak on failure path in pch_dma_probe()
  dmaengine: at_xdmac: unlock spin lock before return
  dmaengine: xgene: devm_ioremap() returns NULL on error
  dmaengine: xgene: buffer overflow in xgene_dma_init_channels()
  dmaengine: usb-dmac: Fix dereferencing freed memory 'desc'
  dmaengine: sa11x0: report slave capabilities to upper layers
  dmaengine: vdma: Fix compilation warnings
  dmaengine: fsl_raid: statify fsl_re_chan_probe
  dmaengine: Driver support for FSL RaidEngine device.
  dmaengine: xgene_dma_init_ring_mngr() can be static
  Documentation: dma: Add documentation for the APM X-Gene SoC DMA device DTS binding
  arm64: dts: Add APM X-Gene SoC DMA device and DMA clock DTS nodes
  dmaengine: Add support for APM X-Gene SoC DMA engine driver
  dmaengine: usb-dmac: Add Renesas USB DMA Controller (USB-DMAC) driver
  dmaengine: renesas,usb-dmac: Add device tree bindings documentation
  dmaengine: edma: fixed wrongly initialized data parameter to the edma callback
  dmaengine: ste_dma40: fix implicit conversion
  ...

Merge branch 'topic/sh' into for-linus

2015-04-20T18:51:14+00:00

dmaengine: shdmac: avoid unused variable warnings

2015-04-17T18:15:06+00:00

This driver uses '#ifdef CONFIG_ARCH_SHMOBILE' and '#ifdef CONFIG_ARM'
interchangeably in its sh_dmae_probe function, which causes a build
warning when building for ARM without also enabling shmobile:

dma/sh/shdmac.c: In function sh_dmae_probe:
dma/sh/shdmac.c:696:6: warning: unused variable errirq [-Wunused-variable]
dma/sh/shdmac.c:695:16: warning: unused variable irqflags [-Wunused-variable]
dma/sh/shdmac.c: At top level:
dma/sh/shdmac.c:447:20: warning: sh_dmae_err defined but not used [-Wunused-function]

This changes all the #ifdef to test for CONFIG_ARCH_SHMOBILE to
avoid that warning. An earlier patch from Laurent had fixed the warning
for non-ARM case, but it still remained present in ARM randconfig builds.

Signed-off-by: Arnd Bergmann 
Fixes: 52d6a5ee101bf ("DMA: shdma: Fix warnings due to declared but unused symbols")
Acked-by: Laurent Pinchart 
Signed-off-by: Vinod Koul

dmaengine: usb-dmac: Fix dereferencing freed memory 'desc'

2015-04-17T17:58:48+00:00

This patch fixes an issue that the usb_dmac_desc_free() is
dereferencing freed memory 'desc' because it uses list_for_each_entry().
This function should use list_for_each_entry_safe().

Reported-by: Dan Carpenter 
Signed-off-by: Yoshihiro Shimoda 
Signed-off-by: Vinod Koul

dmaengine: usb-dmac: Add Renesas USB DMA Controller (USB-DMAC) driver

2015-04-02T07:27:32+00:00

This DMAC is Renesas USB high-speed module DMA controller that
supports slave transfer.

This USB-DMAC has similar register sets with R-Car Gen2 DMAC, but
the USB-DMAC has specific registers to control the USB transactions.
If this code is added into the rcar-dmac driver, it will become
unreadable. So, this driver is independent from the rcar-dmac.

And, this USB-DMAC uses virt-dma infrastructure.

Signed-off-by: Yoshihiro Shimoda 
Signed-off-by: Vinod Koul

dmaengine: remove Renesas Audio DMAC peri peri

2015-03-18T08:27:54+00:00

Renesas R-Car sound (= rsnd) needs 2 DMAC which are called as
Audio DMAC (= 1st DMAC) and Audio DMAC peri peri (2nd DMAC).
And rsnd had assumed that 1st / 2nd DMACs are implemented as DMAEngine.
But, in result of DMA ML discussion, 2nd DMAC was concluded that it is
not a general purpose DMAC (2nd DMAC is for Device to Device inside
sound system). Additionally, current DMAEngine can't support Device to
Device, and we don't have correct DT bindings for it at this point.
So the easiest solution for it is that move it from DMAEngine to rsnd
driver.
Audio DMAC peri peri on DMAEngine is no longer needed. remove it.

Signed-off-by: Kuninori Morimoto 
Acked-by: Geert Uytterhoeven 
Acked-by: Arnd Bergmann

dmaengine: shdma: Move DMA stop to (runtime) suspend callbacks

2015-03-02T16:40:44+00:00

During system reboot, the sh-dma-engine device may be runtime-suspended,
causing a crash:

    Unhandled fault: imprecise external abort (0x1406) at 0x0002c02c
    Internal error: : 1406 [#1] SMP ARM
    ...
    PC is at sh_dmae_ctl_stop+0x28/0x64
    LR is at sh_dmae_ctl_stop+0x24/0x64

If the sh-dma-engine is runtime-suspended, its module clock is turned
off, and its registers cannot be accessed.

To fix this, move the call to sh_dmae_ctl_stop(), which touches the
DMAOR register, to the sh_dmae_suspend() and sh_dmae_runtime_suspend()
callbacks.  This makes PM operations more symmetric, as both
sh_dmae_resume() and sh_dmae_runtime_resume() already call sh_dmae_rst()
to re-initialize the DMAOR register.

Remove sh_dmae_shutdown(), as it became empty.

Signed-off-by: Geert Uytterhoeven 
Reviewed-by: Ulf Hansson 
Signed-off-by: Vinod Koul

dmaengine: shdma: use normal interface for passing slave id

2015-02-23T10:42:24+00:00

in dma_slave_config, which is incompatible with the way that the
dmaengine API normally works.

I've had a closer look at the existing code now and found that all
slave drivers that pass a slave_id in dma_slave_config for SH do that
right after passing the same ID into shdma_chan_filter, so we can just
rely on that. However, the various shdma drivers currently do not
remember the slave ID that was passed into the filter function when
used in non-DT mode and only check the value to find a matching channel,
unlike all other drivers.

There might still be drivers that are not part of the kernel that rely
on setting the slave_id to some other value, so to be on the safe side,
this adds another 'real_slave_id' field to shdma_chan that remembers
the ID and uses it when a driver passes a zero slave_id in dma_slave_config,
like most drivers do.

Eventually, the real_slave_id and slave_id fields should just get merged
into one field, but that requires other changes.

Signed-off-by: Arnd Bergmann 
Signed-off-by: Kuninori Morimoto 
Signed-off-by: Vinod Koul

dmaengine: rcar-dmac: Disable channel 0 when using IOMMU

2015-02-16T04:03:35+00:00

A still unconfirmed hardware bug prevents the IPMMU microTLB 0 to be
flushed correctly, resulting in memory corruption. DMAC 0 channel 0 is
connected to microTLB 0 on currently supported platforms, so we can't
use it with the IPMMU. As the IOMMU API operates at the device level we
can't disable it selectively, so ignore channel 0 for now if the device
is part of an IOMMU group.

Signed-off-by: Laurent Pinchart 
Acked-by: Geert Uytterhoeven 
Signed-off-by: Vinod Koul