linux.git/drivers/dma/pl330.c, branch v3.13 Linux kernel source tree dma: pl330: ensure DMA descriptors are zero-initialised 2013-12-18T18:08:56+00:00 Will Deacon will.deacon@arm.com 2013-12-02T18:01:30+00:00 0baf8f6a2ac86c2c40ed0cacab8ea3d17371a1bb I see the following splat with 3.13-rc1 when attempting to perform DMA: [ 253.004516] Alignment trap: not handling instruction e1902f9f at [<c0204b40>] [ 253.004583] Unhandled fault: alignment exception (0x221) at 0xdfdfdfd7 [ 253.004646] Internal error: : 221 [#1] PREEMPT SMP ARM [ 253.004691] Modules linked in: dmatest(+) [last unloaded: dmatest] [ 253.004798] CPU: 0 PID: 671 Comm: kthreadd Not tainted 3.13.0-rc1+ #2 [ 253.004864] task: df9b0900 ti: df03e000 task.ti: df03e000 [ 253.004937] PC is at dmaengine_unmap_put+0x14/0x34 [ 253.005010] LR is at pl330_tasklet+0x3c8/0x550 [ 253.005087] pc : [<c0204b44>] lr : [<c0207478>] psr: a00e0193 [ 253.005087] sp : df03fe48 ip : 00000000 fp : df03bf18 [ 253.005178] r10: bf00e108 r9 : 00000001 r8 : 00000000 [ 253.005245] r7 : df837040 r6 : dfb41800 r5 : df837048 r4 : df837000 [ 253.005316] r3 : dfdfdfcf r2 : dfb41f80 r1 : df837048 r0 : dfdfdfd7 [ 253.005384] Flags: NzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel [ 253.005459] Control: 30c5387d Table: 9fb9ba80 DAC: fffffffd [ 253.005520] Process kthreadd (pid: 671, stack limit = 0xdf03e248) This is due to desc->txd.unmap containing garbage (uninitialised memory). Rather than add another dummy initialisation to _init_desc, instead ensure that the descriptors are zero-initialised during allocation and remove the dummy, per-field initialisation. Cc: Andriy Shevchenko <andriy.shevchenko@intel.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> 
I see the following splat with 3.13-rc1 when attempting to perform DMA:

[  253.004516] Alignment trap: not handling instruction e1902f9f at [<c0204b40>]
[  253.004583] Unhandled fault: alignment exception (0x221) at 0xdfdfdfd7
[  253.004646] Internal error: : 221 [#1] PREEMPT SMP ARM
[  253.004691] Modules linked in: dmatest(+) [last unloaded: dmatest]
[  253.004798] CPU: 0 PID: 671 Comm: kthreadd Not tainted 3.13.0-rc1+ #2
[  253.004864] task: df9b0900 ti: df03e000 task.ti: df03e000
[  253.004937] PC is at dmaengine_unmap_put+0x14/0x34
[  253.005010] LR is at pl330_tasklet+0x3c8/0x550
[  253.005087] pc : [<c0204b44>]    lr : [<c0207478>]    psr: a00e0193
[  253.005087] sp : df03fe48  ip : 00000000  fp : df03bf18
[  253.005178] r10: bf00e108  r9 : 00000001  r8 : 00000000
[  253.005245] r7 : df837040  r6 : dfb41800  r5 : df837048  r4 : df837000
[  253.005316] r3 : dfdfdfcf  r2 : dfb41f80  r1 : df837048  r0 : dfdfdfd7
[  253.005384] Flags: NzCv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
[  253.005459] Control: 30c5387d  Table: 9fb9ba80  DAC: fffffffd
[  253.005520] Process kthreadd (pid: 671, stack limit = 0xdf03e248)

This is due to desc->txd.unmap containing garbage (uninitialised memory).

Rather than add another dummy initialisation to _init_desc, instead
ensure that the descriptors are zero-initialised during allocation and
remove the dummy, per-field initialisation.

Cc: Andriy Shevchenko <andriy.shevchenko@intel.com>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dma 2013-11-20T21:20:24+00:00 Linus Torvalds torvalds@linux-foundation.org 2013-11-20T21:20:24+00:00 e6d69a60b77a6ea8d5f9d41765c7571bb8d45531 Pull slave-dmaengine changes from Vinod Koul: "This brings for slave dmaengine: - Change dma notification flag to DMA_COMPLETE from DMA_SUCCESS as dmaengine can only transfer and not verify validaty of dma transfers - Bunch of fixes across drivers: - cppi41 driver fixes from Daniel - 8 channel freescale dma engine support and updated bindings from Hongbo - msx-dma fixes and cleanup by Markus - DMAengine updates from Dan: - Bartlomiej and Dan finalized a rework of the dma address unmap implementation. - In the course of testing 1/ a collection of enhancements to dmatest fell out. Notably basic performance statistics, and fixed / enhanced test control through new module parameters 'run', 'wait', 'noverify', and 'verbose'. Thanks to Andriy and Linus [Walleij] for their review. - Testing the raid related corner cases of 1/ triggered bugs in the recently added 16-source operation support in the ioatdma driver. - Some minor fixes / cleanups to mv_xor and ioatdma" * 'next' of git://git.infradead.org/users/vkoul/slave-dma: (99 commits) dma: mv_xor: Fix mis-usage of mmio 'base' and 'high_base' registers dma: mv_xor: Remove unneeded NULL address check ioat: fix ioat3_irq_reinit ioat: kill msix_single_vector support raid6test: add new corner case for ioatdma driver ioatdma: clean up sed pool kmem_cache ioatdma: fix selection of 16 vs 8 source path ioatdma: fix sed pool selection ioatdma: Fix bug in selftest after removal of DMA_MEMSET. dmatest: verbose mode dmatest: convert to dmaengine_unmap_data dmatest: add a 'wait' parameter dmatest: add basic performance metrics dmatest: add support for skipping verification and random data setup dmatest: use pseudo random numbers dmatest: support xor-only, or pq-only channels in tests dmatest: restore ability to start test at module load and init dmatest: cleanup redundant "dmatest: " prefixes dmatest: replace stored results mechanism, with uniform messages Revert "dmatest: append verify result to results" ... 
Pull slave-dmaengine changes from Vinod Koul:
 "This brings for slave dmaengine:

   - Change dma notification flag to DMA_COMPLETE from DMA_SUCCESS as
     dmaengine can only transfer and not verify validaty of dma
     transfers

   - Bunch of fixes across drivers:

      - cppi41 driver fixes from Daniel

      - 8 channel freescale dma engine support and updated bindings from
        Hongbo

      - msx-dma fixes and cleanup by Markus

   - DMAengine updates from Dan:

      - Bartlomiej and Dan finalized a rework of the dma address unmap
        implementation.

      - In the course of testing 1/ a collection of enhancements to
        dmatest fell out.  Notably basic performance statistics, and
        fixed / enhanced test control through new module parameters
        'run', 'wait', 'noverify', and 'verbose'.  Thanks to Andriy and
        Linus [Walleij] for their review.

      - Testing the raid related corner cases of 1/ triggered bugs in
        the recently added 16-source operation support in the ioatdma
        driver.

      - Some minor fixes / cleanups to mv_xor and ioatdma"

* 'next' of git://git.infradead.org/users/vkoul/slave-dma: (99 commits)
  dma: mv_xor: Fix mis-usage of mmio 'base' and 'high_base' registers
  dma: mv_xor: Remove unneeded NULL address check
  ioat: fix ioat3_irq_reinit
  ioat: kill msix_single_vector support
  raid6test: add new corner case for ioatdma driver
  ioatdma: clean up sed pool kmem_cache
  ioatdma: fix selection of 16 vs 8 source path
  ioatdma: fix sed pool selection
  ioatdma: Fix bug in selftest after removal of DMA_MEMSET.
  dmatest: verbose mode
  dmatest: convert to dmaengine_unmap_data
  dmatest: add a 'wait' parameter
  dmatest: add basic performance metrics
  dmatest: add support for skipping verification and random data setup
  dmatest: use pseudo random numbers
  dmatest: support xor-only, or pq-only channels in tests
  dmatest: restore ability to start test at module load and init
  dmatest: cleanup redundant "dmatest: " prefixes
  dmatest: replace stored results mechanism, with uniform messages
  Revert "dmatest: append verify result to results"
  ...
Merge commit 'dmaengine-3.13-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/dmaengine 2013-11-16T06:32:36+00:00 Vinod Koul vinod.koul@intel.com 2013-11-16T06:24:17+00:00 df12a3178d340319b1955be6b973a4eb84aff754 Pull dmaengine changes from Dan 1/ Bartlomiej and Dan finalized a rework of the dma address unmap implementation. 2/ In the course of testing 1/ a collection of enhancements to dmatest fell out. Notably basic performance statistics, and fixed / enhanced test control through new module parameters 'run', 'wait', 'noverify', and 'verbose'. Thanks to Andriy and Linus for their review. 3/ Testing the raid related corner cases of 1/ triggered bugs in the recently added 16-source operation support in the ioatdma driver. 4/ Some minor fixes / cleanups to mv_xor and ioatdma. Conflicts: drivers/dma/dmatest.c Signed-off-by: Vinod Koul <vinod.koul@intel.com> 
Pull dmaengine changes from Dan

1/ Bartlomiej and Dan finalized a rework of the dma address unmap
   implementation.

2/ In the course of testing 1/ a collection of enhancements to dmatest
   fell out.  Notably basic performance statistics, and fixed / enhanced
   test control through new module parameters 'run', 'wait', 'noverify',
   and 'verbose'.  Thanks to Andriy and Linus for their review.

3/ Testing the raid related corner cases of 1/ triggered bugs in the
   recently added 16-source operation support in the ioatdma driver.

4/ Some minor fixes / cleanups to mv_xor and ioatdma.

Conflicts:
	drivers/dma/dmatest.c

Signed-off-by: Vinod Koul <vinod.koul@intel.com>
dmaengine: prepare for generic 'unmap' data 2013-11-14T00:25:06+00:00 Dan Williams dan.j.williams@intel.com 2013-10-18T17:35:23+00:00 d38a8c622a1b382336c3e152c6caf4e11d1f1b2a Add a hook for a common dma unmap implementation to enable removal of the per driver custom unmap code. (A reworked version of Bartlomiej Zolnierkiewicz's patches to remove the custom callbacks and the size increase of dma_async_tx_descriptor for drivers that don't care about raid). Cc: Vinod Koul <vinod.koul@intel.com> Cc: Tomasz Figa <t.figa@samsung.com> Cc: Dave Jiang <dave.jiang@intel.com> [bzolnier: prepare pl330 driver for adding missing unmap while at it] Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> 
Add a hook for a common dma unmap implementation to enable removal of
the per driver custom unmap code.  (A reworked version of Bartlomiej
Zolnierkiewicz's patches to remove the custom callbacks and the size
increase of dma_async_tx_descriptor for drivers that don't care about
raid).

Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Tomasz Figa <t.figa@samsung.com>
Cc: Dave Jiang <dave.jiang@intel.com>
[bzolnier: prepare pl330 driver for adding missing unmap while at it]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
dma: pl330: silence a compile warning 2013-11-13T13:19:44+00:00 Dan Carpenter dan.carpenter@oracle.com 2013-11-08T09:51:16+00:00 2f986ec6fa57a5dcf77f19f5f0d44b1f680a100f On 64 bit systems GCC warns that: drivers/dma/pl330.c: In function ‘pl330_filter’: drivers/dma/pl330.c:2317:21: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] It's harmless and I have casted it away. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> 
On 64 bit systems GCC warns that:

drivers/dma/pl330.c: In function ‘pl330_filter’:
drivers/dma/pl330.c:2317:21: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]

It's harmless and I have casted it away.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
dma: pl330: off by one in pl330_probe() 2013-11-13T13:19:43+00:00 Dan Carpenter dan.carpenter@oracle.com 2013-11-08T09:50:24+00:00 02808b427689d46136d9662c5013145f70119f42 There are only AMBA_NR_IRQS (2) elements in adev->irq[]. This code maybe works if the there is a zero directly after the array. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> 
There are only AMBA_NR_IRQS (2) elements in adev->irq[].  This code
maybe works if the there is a zero directly after the array.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
DMA-API: dma: pl330: add dma_set_mask_and_coherent() call 2013-10-31T14:48:41+00:00 Russell King rmk+kernel@arm.linux.org.uk 2013-06-27T09:29:32+00:00 64113016a456399d3fe4849a4f6593fb1cd48f53 The DMA API requires drivers to call the appropriate dma_set_mask() functions before doing any DMA mapping. Add this required call to the AMBA PL330 driver. Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 
The DMA API requires drivers to call the appropriate dma_set_mask()
functions before doing any DMA mapping.  Add this required call to
the AMBA PL330 driver.

Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
dma: pl330: Remove unnecessary amba_set_drvdata() 2013-10-31T14:24:10+00:00 Michal Simek michal.simek@xilinx.com 2013-10-03T09:46:23+00:00 600d525869c45a6b3ce1fa5e58281376c5a2dab2 Driver core clears the driver data to NULL after device_release or on probe failure, so just remove it from here. Driver core change: "device-core: Ensure drvdata = NULL when no driver is bound" (sha1: 0998d0631001288a5974afc0b2a5f568bcdecb4d) Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> 
Driver core clears the driver data to NULL after device_release
or on probe failure, so just remove it from here.

Driver core change:
"device-core: Ensure drvdata = NULL when no driver is bound"
(sha1: 0998d0631001288a5974afc0b2a5f568bcdecb4d)

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
dma: pl330: Support per channel irq allocation 2013-10-13T16:06:22+00:00 Michal Simek michal.simek@xilinx.com 2013-09-30T06:50:48+00:00 e98b3cafe5f048be40ff6acb18dfa7c9a0e9423e Some pl330 have per channel irq and it is necessary to allocate all of them. Loop over irq assigned for this device to support these pl330 IPs. For example this IP is available on Xilinx Zynq platform. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Tested-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com> 
Some pl330 have per channel irq and it is necessary
to allocate all of them. Loop over irq assigned for this
device to support these pl330 IPs.

For example this IP is available on Xilinx Zynq platform.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Tested-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
dma: pl330: Simplify irq allocation 2013-10-07T02:11:38+00:00 Michal Simek michal.simek@xilinx.com 2013-09-04T14:40:17+00:00 173e838c31fded558dd27293ae6253a495696ca0 Use devm_request_irq function. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> 
Use devm_request_irq function.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>