linux.git/drivers/dma/ioat, branch v4.14

dmaengine: ioatdma: Add intr_coalesce sysfs entry

2017-08-23T16:02:21+00:00

We observed performance increase with DMA copy from memory
to MMIO by changing the interrupt coalescing value to 0.
The previous set value was projected on the C5xxx Xeon
platform and no longer holds true. Removing hard coded
value and providing a tune-able in sysfs in order to allow
user to tune this on a per channel basis. By default this
value will be set to 0.
Example of sysfs variable importing for interrupt coalescing
value from command line:
echo 5> /sys/devices/pci0000:00/0000:00:04.0/dma/dma0chan0/
quickdata/intr_coalesce

Reported-by: Nithin Sujir 
Signed-off-by: Ujjal Singh 
Acked-by: Dave Jiang 
Signed-off-by: Vinod Koul

dmaengine: ioat: constify pci_device_id.

2017-07-18T16:02:14+00:00

pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by  work with
const pci_device_id. So mark the non-const structs as const.

File size before:
   text	   data	    bss	    dec	    hex	filename
  12582	   3056	     16	  15654	   3d26	drivers/dma/ioat/init.o

File size After adding 'const':
   text	   data	    bss	    dec	    hex	filename
  14773	    865	     16	  15654	   3d26	drivers/dma/ioat/init.o

Signed-off-by: Arvind Yadav 
Signed-off-by: Vinod Koul

Merge tag 'dmaengine-4.13-rc1' of git://git.infradead.org/users/vkoul/slave-dma

2017-07-08T19:36:50+00:00

Pull dmaengine updates from Vinod Koul:

 - removal of AVR32 support in dw driver as AVR32 is gone

 - new driver for Broadcom stream buffer accelerator (SBA) RAID driver

 - add support for Faraday Technology FTDMAC020 in amba-pl08x driver

 - IOMMU support in pl330 driver

 - updates to bunch of drivers

* tag 'dmaengine-4.13-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (36 commits)
  dmaengine: qcom_hidma: correct API violation for submit
  dmaengine: zynqmp_dma: Remove max len check in zynqmp_dma_prep_memcpy
  dmaengine: tegra-apb: Really fix runtime-pm usage
  dmaengine: fsl_raid: make of_device_ids const.
  dmaengine: qcom_hidma: allow ACPI/DT parameters to be overridden
  dmaengine: fsldma: set BWC, DAHTS and SAHTS values correctly
  dmaengine: Kconfig: Simplify the help text for MXS_DMA
  dmaengine: pl330: Delete unused functions
  dmaengine: Replace WARN_TAINT_ONCE() with pr_warn_once()
  dmaengine: Kconfig: Extend the dependency for MXS_DMA
  dmaengine: mxs: Use %zu for printing a size_t variable
  dmaengine: ste_dma40: Cleanup scatterlist layering violations
  dmaengine: imx-dma: cleanup scatterlist layering violations
  dmaengine: use proper name for the R-Car SoC
  dmaengine: imx-sdma: Fix compilation warning.
  dmaengine: imx-sdma: Handle return value of clk_prepare_enable
  dmaengine: pl330: Add IOMMU support to slave tranfers
  dmaengine: DW DMAC: Handle return value of clk_prepare_enable
  dmaengine: pl08x: use GENMASK() to create bitmasks
  dmaengine: pl08x: Add support for Faraday Technology FTDMAC020
  ...

dmaengine: ioat: don't use DMA_ERROR_CODE

2017-06-20T09:12:56+00:00

DMA_ERROR_CODE is not a public API and will go away.  Instead properly
unwind based on the loop counter.

Signed-off-by: Christoph Hellwig 
Acked-by: Dave Jiang 
Acked-By: Vinod Koul

dmaengine: Replace WARN_TAINT_ONCE() with pr_warn_once()

2017-06-15T04:20:37+00:00

The WARN_TAINT_ONCE() prints out a loud stack trace on broken BIOSes.
The systems that have this problem are several years out of support and
no longer have BIOS updates available.  The stack trace isn't necessary
and a pr_warn_once() will do.

Change WARN_TAINT_ONCE() to pr_warn_once() and taint.

Signed-off-by: Prarit Bhargava 
Cc: Dan Williams 
Cc: Vinod Koul 
Cc: Duyck, Alexander H 
Signed-off-by: Vinod Koul

dmaengine: ioat: use setup_timer

2017-04-24T04:08:41+00:00

Use setup_timer() instead of init_timer() to simplify the code.

Signed-off-by: Geliang Tang 
Reviewed-by: Dan Williams 
Signed-off-by: Vinod Koul

dmaengine: iota: ioat_alloc_chan_resources should not perform sleeping allocations.

2017-01-10T05:11:51+00:00

On a kernel with DEBUG_LOCKS, ioat_free_chan_resources triggers an
in_interrupt() warning.  With PROVE_LOCKING, it reports detecting a
SOFTIRQ-safe to SOFTIRQ-unsafe lock ordering in the same code path.

This is because dma_generic_alloc_coherent() checks if the GFP flags
permit blocking.  It allocates from different subsystems if blocking is
permitted.  The free path knows how to return the memory to the correct
allocator.  If GFP_KERNEL is specified then the alloc and free end up
going through cma_alloc(), which uses mutexes.

Given that ioat_free_chan_resources() can be called in interrupt
context, ioat_alloc_chan_resources() must specify GFP_NOWAIT so that the
allocations do not block and instead use an allocator that uses
spinlocks.

Signed-off-by: Krister Johansen 
Acked-by: Dave Jiang 
Signed-off-by: Vinod Koul

dmaengine: ioatdma: workaround SKX ioatdma version

2017-01-02T02:42:59+00:00

The Skylake ioatdma is technically CBDMA 3.2+ and contains the same hardware
bits with some additional 3.3 features, but it's not really 3.3 where the
driver is concerned.

Signed-off-by: Dave Jiang 
Signed-off-by: Vinod Koul

dmaengine: ioatdma: Add Skylake PCI Dev ID

2017-01-02T02:42:59+00:00

Adding Skylake Xeon PCI device ids for ioatdma and related bits.

Signed-off-by: Dave Jiang 
Signed-off-by: Vinod Koul

Merge tag 'dmaengine-4.10-rc1' of git://git.infradead.org/users/vkoul/slave-dma

2016-12-15T04:42:45+00:00

Pull dmaengine updates from Vinod Koul:
 "Fairly routine update this time around with all changes specific to
  drivers:

   - New driver for STMicroelectronics FDMA
   - Memory-to-memory transfers on dw dmac
   - Support for slave maps on pl08x devices
   - Bunch of driver fixes to use dma_pool_zalloc
   - Bunch of compile and warning fixes spread across drivers"

[ The ST FDMA driver already came in earlier through the remoteproc tree ]

* tag 'dmaengine-4.10-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (68 commits)
  dmaengine: sirf-dma: remove unused ‘sdesc’
  dmaengine: pl330: remove unused ‘regs’
  dmaengine: s3c24xx: remove unused ‘cdata’
  dmaengine: stm32-dma: remove unused ‘src_addr’
  dmaengine: stm32-dma: remove unused ‘dst_addr’
  dmaengine: stm32-dma: remove unused ‘sfcr’
  dmaengine: pch_dma: remove unused ‘cookie’
  dmaengine: mic_x100_dma: remove unused ‘data’
  dmaengine: img-mdc: remove unused ‘prev_phys’
  dmaengine: usb-dmac: remove unused ‘uchan’
  dmaengine: ioat: remove unused ‘res’
  dmaengine: ioat: remove unused ‘ioat_dma’
  dmaengine: ioat: remove unused ‘is_raid_device’
  dmaengine: pl330: do not generate unaligned access
  dmaengine: k3dma: move to dma_pool_zalloc
  dmaengine: at_hdmac: move to dma_pool_zalloc
  dmaengine: at_xdmac: don't restore unsaved status
  dmaengine: ioat: set error code on failures
  dmaengine: ioat: set error code on failures
  dmaengine: DW DMAC: add multi-block property to device tree
  ...