linux.git/drivers/dma/Kconfig, branch v5.17

dmaengine: zynqmp_dma: enable COMPILE_TEST

2021-10-01T11:56:30+00:00

The driver doesn't use anything architecture specific. Allow the
compilation on other architectures as well.

Signed-off-by: Michael Tretter 
Link: https://lore.kernel.org/r/20210826094742.1302009-4-m.tretter@pengutronix.de
Signed-off-by: Vinod Koul

dmaengine: ptdma: Initial driver for the AMD PTDMA

2021-08-29T13:44:20+00:00

Add support for AMD PTDMA controller. It performs high-bandwidth
memory to memory and IO copy operation. Device commands are managed
via a circular queue of 'descriptors', each of which specifies source
and destination addresses for copying a single buffer of data.

Signed-off-by: Sanjay R Mehta 
Link: https://lore.kernel.org/r/1629208559-51964-2-git-send-email-Sanju.Mehta@amd.com
Signed-off-by: Vinod Koul

dmaengine: idxd: fix setting up priv mode for dwq

2021-08-29T13:44:20+00:00

DSA spec says WQ priv bit is 0 if the Privileged Mode Enable field of the
PCI Express PASID capability is 0 and pasid is enabled. Make sure that the
WQCFG priv field is set correctly according to usage type. Reject config if
setting up kernel WQ type and no support. Also add the correct priv setup
for a descriptor.

Fixes: 484f910e93b4 ("dmaengine: idxd: fix wq config registers offset programming")
Cc: Ramesh Thomas 
Signed-off-by: Dave Jiang 
Link: https://lore.kernel.org/r/162939084657.903168.14160019185148244596.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul

dmaengine: ioat: depends on !UML

2021-08-25T11:31:32+00:00

Now that UML has PCI support, this driver must depend also on
!UML since it pokes at X86_64 architecture internals that don't
exist on ARCH=um.

Reported-by: Geert Uytterhoeven 
Signed-off-by: Johannes Berg 
Acked-by: Dave Jiang 
Link: https://lore.kernel.org/r/20210809112409.a3a0974874d2.I2ffe3d11ed37f735da2f39884a74c953b258b995@changeid
Signed-off-by: Vinod Koul

dmaengine: idxd: move dsa_drv support to compatible mode

2021-07-21T04:39:16+00:00

The original architecture of /sys/bus/dsa invented a scheme whereby
a single entry in the list of bus drivers, /sys/bus/drivers/dsa,
handled all device types and internally routed them to different
different drivers. Those internal drivers were invisible to
userspace.

With the idxd driver transitioned to a proper bus device-driver model,
the legacy behavior needs to be preserved due to it being exposed to
user space via sysfs. Create a compat driver to provide the legacy
behavior for /sys/bus/dsa/drivers/dsa. This should satisfy user
tool accel-config v3.2 or ealier where this behavior is expected.
If the distro has a newer accel-config then the legacy mode does
not need to be enabled.

When the compat driver binds the device (i.e. dsa0) to the dsa driver,
it will be bound to the new idxd_drv. The wq device (i.e. wq0.0) will
be bound to either the dmaengine_drv or the user_drv. The dsa_drv
becomes a routing mechansim for the new drivers. It will not support
additional external drivers that are implemented later.

Reviewed-by: Dan Williams 
Signed-off-by: Dave Jiang 
Link: https://lore.kernel.org/r/162637468705.744545.4399080971745974435.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul

dmaengine: dsa: move dsa_bus_type out of idxd driver to standalone

2021-07-21T04:39:16+00:00

In preparation for dsa_drv compat support to be built-in, move the bus
code to its own compilation unit. A follow-on patch adds the compat
implementation. Recall that the compat implementation allows for the
deprecated / omnibus dsa_drv binding scheme rather than the idiomatic
organization of a full fledged bus driver per driver type.

Reviewed-by: Dan Williams 
Signed-off-by: Dave Jiang 
Link: https://lore.kernel.org/r/162637468142.744545.2811632736881720857.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul

dmaengine: idxd: depends on !UML

2021-07-14T06:59:54+00:00

Now that UML has PCI support, this driver must depend also on
!UML since it pokes at X86_64 architecture internals that don't
exist on ARCH=um.

Reported-by: kernel test robot 
Signed-off-by: Johannes Berg 
Acked-by: Dave Jiang 
Acked-By: Anton Ivanov 
Link: https://lore.kernel.org/r/20210625103810.fe877ae0aef4.If240438e3f50ae226f3f755fc46ea498c6858393@changeid
Signed-off-by: Vinod Koul

dmaengine: ALTERA_MSGDMA depends on HAS_IOMEM

2021-05-31T04:14:14+00:00

When CONFIG_HAS_IOMEM is not set/enabled, certain iomap() family
functions [including ioremap(), devm_ioremap(), etc.] are not
available.
Drivers that use these functions should depend on HAS_IOMEM so that
they do not cause build errors.

Repairs this build error:
s390-linux-ld: drivers/dma/altera-msgdma.o: in function `request_and_map':
altera-msgdma.c:(.text+0x14b0): undefined reference to `devm_ioremap'

Fixes: a85c6f1b2921 ("dmaengine: Add driver for Altera / Intel mSGDMA IP core")
Signed-off-by: Randy Dunlap 
Reported-by: kernel test robot 
Cc: Stefan Roese 
Cc: Vinod Koul 
Cc: dmaengine@vger.kernel.org
Reviewed-by: Stefan Roese 
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr@denx.de
Link: https://lore.kernel.org/r/20210522021313.16405-2-rdunlap@infradead.org
Signed-off-by: Vinod Koul

dmaengine: xilinx: dpdma: Add missing dependencies to Kconfig

2021-05-31T04:07:17+00:00

The driver depends on both OF and IOMEM support, express those
dependencies in Kconfig. This fixes a build failure on S390 reported by
the 0day bot.

Reported-by: kernel test robot 
Signed-off-by: Laurent Pinchart 
Tested-by: Jianqiang Chen 
Reviewed-by: Jianqiang Chen 
Link: https://lore.kernel.org/r/20210520152420.23986-2-laurent.pinchart@ideasonboard.com
Signed-off-by: Vinod Koul

Merge tag 'dmaengine-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine

2021-05-04T18:24:46+00:00

Pull dmaengine updates from Vinod Koul:
 "New drivers/devices:

   - Support for QCOM SM8150 GPI DMA

  Updates:

   - Big pile of idxd updates including support for performance
     monitoring

   - Support in dw-edma for interleaved dma

   - Support for synchronize() in Xilinx driver"

* tag 'dmaengine-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (42 commits)
  dmaengine: idxd: Enable IDXD performance monitor support
  dmaengine: idxd: Add IDXD performance monitor support
  dmaengine: idxd: remove MSIX masking for interrupt handlers
  dmaengine: idxd: device cmd should use dedicated lock
  dmaengine: idxd: support reporting of halt interrupt
  dmaengine: idxd: enable SVA feature for IOMMU
  dmaengine: idxd: convert sprintf() to sysfs_emit() for all usages
  dmaengine: idxd: add interrupt handle request and release support
  dmaengine: idxd: add support for readonly config mode
  dmaengine: idxd: add percpu_ref to descriptor submission path
  dmaengine: idxd: remove detection of device type
  dmaengine: idxd: iax bus removal
  dmaengine: idxd: fix cdev setup and free device lifetime issues
  dmaengine: idxd: fix group conf_dev lifetime
  dmaengine: idxd: fix engine conf_dev lifetime
  dmaengine: idxd: fix wq conf_dev 'struct device' lifetime
  dmaengine: idxd: fix idxd conf_dev 'struct device' lifetime
  dmaengine: idxd: use ida for device instance enumeration
  dmaengine: idxd: removal of pcim managed mmio mapping
  dmaengine: idxd: cleanup pci interrupt vector allocation management
  ...