Pull virtio updates from Michael Tsirkin:

 - vdpa generic device type support

 - more virtio hardening for broken devices (but on the same theme,
   revert some virtio hotplug hardening patches - they were misusing
   some interrupt flags and had to be reverted)

 - RSS support in virtio-net

 - max device MTU support in mlx5 vdpa

 - akcipher support in virtio-crypto

 - shared IRQ support in ifcvf vdpa

 - a minor performance improvement in vhost

 - enable virtio mem for ARM64

 - beginnings of advance dma support

 - cleanups, fixes all over the place

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (33 commits)
  vdpa/mlx5: Avoid processing works if workqueue was destroyed
  vhost: handle error while adding split ranges to iotlb
  vdpa: support exposing the count of vqs to userspace
  vdpa: change the type of nvqs to u32
  vdpa: support exposing the config size to userspace
  vdpa/mlx5: re-create forwarding rules after mac modified
  virtio: pci: check bar values read from virtio config space
  Revert "virtio_pci: harden MSI-X interrupts"
  Revert "virtio-pci: harden INTX interrupts"
  drivers/net/virtio_net: Added RSS hash report control.
  drivers/net/virtio_net: Added RSS hash report.
  drivers/net/virtio_net: Added basic RSS support.
  drivers/net/virtio_net: Fixed padded vheader to use v1 with hash.
  virtio: use virtio_device_ready() in virtio_device_restore()
  tools/virtio: compile with -pthread
  tools/virtio: fix after premapped buf support
  virtio_ring: remove flags check for unmap packed indirect desc
  virtio_ring: remove flags check for unmap split indirect desc
  virtio_ring: rename vring_unmap_state_packed() to vring_unmap_extra_packed()
  net/mlx5: Add support for configuring max device MTU
  ...

Pull crypto fixes from Herbert Xu:

 - Missing Kconfig dependency on arm that leads to boot failure

 - x86 SLS fixes

 - Reference leak in the stm32 driver

* tag 'v5.18-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: x86/sm3 - Fixup SLS
  crypto: x86/poly1305 - Fixup SLS
  crypto: x86/chacha20 - Avoid spurious jumps to other functions
  crypto: stm32 - fix reference leak in stm32_crc_remove
  crypto: arm/aes-neonbs-cbc - Select generic cbc and aes

Suggested by Gonglei, rename virtio_crypto_algs.c to
virtio_crypto_skcipher_algs.c. Also minor changes for function name.
Thus the function of source files get clear: skcipher services in
virtio_crypto_skcipher_algs.c and akcipher services in
virtio_crypto_akcipher_algs.c.

Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Link: https://lore.kernel.org/r/20220302033917.1295334-5-pizhenwei@bytedance.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>

Support rsa & pkcs1pad(rsa,sha1) with priority 150.

Test with QEMU built-in backend, it works fine.
1, The self-test framework of crypto layer works fine in guest kernel
2, Test with Linux guest(with asym support), the following script
test(note that pkey_XXX is supported only in a newer version of keyutils):
  - both public key & private key
  - create/close session
  - encrypt/decrypt/sign/verify basic driver operation
  - also test with kernel crypto layer(pkey add/query)

All the cases work fine.

rm -rf *.der *.pem *.pfx
modprobe pkcs8_key_parser # if CONFIG_PKCS8_PRIVATE_KEY_PARSER=m
rm -rf /tmp/data
dd if=/dev/random of=/tmp/data count=1 bs=226

openssl req -nodes -x509 -newkey rsa:2048 -keyout key.pem -out cert.pem -subj "/C=CN/ST=BJ/L=HD/O=qemu/OU=dev/CN=qemu/emailAddress=qemu@qemu.org"
openssl pkcs8 -in key.pem -topk8 -nocrypt -outform DER -out key.der
openssl x509 -in cert.pem -inform PEM -outform DER -out cert.der

PRIV_KEY_ID=`cat key.der | keyctl padd asymmetric test_priv_key @s`
echo "priv key id = "$PRIV_KEY_ID
PUB_KEY_ID=`cat cert.der | keyctl padd asymmetric test_pub_key @s`
echo "pub key id = "$PUB_KEY_ID

keyctl pkey_query $PRIV_KEY_ID 0
keyctl pkey_query $PUB_KEY_ID 0

echo "Enc with priv key..."
keyctl pkey_encrypt $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.priv
echo "Dec with pub key..."
keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.priv enc=pkcs1 >/tmp/dec
cmp /tmp/data /tmp/dec

echo "Sign with priv key..."
keyctl pkey_sign $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 hash=sha1 > /tmp/sig
echo "Verify with pub key..."
keyctl pkey_verify $PRIV_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1

echo "Enc with pub key..."
keyctl pkey_encrypt $PUB_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.pub
echo "Dec with priv key..."
keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.pub enc=pkcs1 >/tmp/dec
cmp /tmp/data /tmp/dec

echo "Verify with pub key..."
keyctl pkey_verify $PUB_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1

[1 compiling warning during development]
Reported-by: kernel test robot <lkp@intel.com>

Co-developed-by: lei he <helei.sig11@bytedance.com>
Signed-off-by: lei he <helei.sig11@bytedance.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Link: https://lore.kernel.org/r/20220302033917.1295334-4-pizhenwei@bytedance.com
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org> #Kconfig tweaks
Link: https://lore.kernel.org/r/20220308205309.2192502-1-nathan@kernel.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

pm_runtime_get_sync() will increment pm usage counter even it
failed. Forgetting to call pm_runtime_put_noidle will result
in reference leak in stm32_crc_remove, so we should fix it.

Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Pull VFIO updates from Alex Williamson:

 - Introduce new device migration uAPI and implement device specific
   mlx5 vfio-pci variant driver supporting new protocol (Jason
   Gunthorpe, Yishai Hadas, Leon Romanovsky)

 - New HiSilicon acc vfio-pci variant driver, also supporting migration
   interface (Shameer Kolothum, Longfang Liu)

 - D3hot fixes for vfio-pci-core (Abhishek Sahu)

 - Document new vfio-pci variant driver acceptance criteria
   (Alex Williamson)

 - Fix UML build unresolved ioport_{un}map() functions
   (Alex Williamson)

 - Fix MAINTAINERS due to header movement (Lukas Bulwahn)

* tag 'vfio-v5.18-rc1' of https://github.com/awilliam/linux-vfio: (31 commits)
  vfio-pci: Provide reviewers and acceptance criteria for variant drivers
  MAINTAINERS: adjust entry for header movement in hisilicon qm driver
  hisi_acc_vfio_pci: Use its own PCI reset_done error handler
  hisi_acc_vfio_pci: Add support for VFIO live migration
  crypto: hisilicon/qm: Set the VF QM state register
  hisi_acc_vfio_pci: Add helper to retrieve the struct pci_driver
  hisi_acc_vfio_pci: Restrict access to VF dev BAR2 migration region
  hisi_acc_vfio_pci: add new vfio_pci driver for HiSilicon ACC devices
  hisi_acc_qm: Move VF PCI device IDs to common header
  crypto: hisilicon/qm: Move few definitions to common header
  crypto: hisilicon/qm: Move the QM header to include/linux
  vfio/mlx5: Fix to not use 0 as NULL pointer
  PCI/IOV: Fix wrong kernel-doc identifier
  vfio/mlx5: Use its own PCI reset_done error handler
  vfio/pci: Expose vfio_pci_core_aer_err_detected()
  vfio/mlx5: Implement vfio_pci driver for mlx5 devices
  vfio/mlx5: Expose migration commands over mlx5 device
  vfio: Remove migration protocol v1 documentation
  vfio: Extend the device migration protocol with RUNNING_P2P
  vfio: Define device migration protocol v2
  ...

Pull flexible-array transformations from Gustavo Silva:
 "Treewide patch that replaces zero-length arrays with flexible-array
  members.

  This has been baking in linux-next for a whole development cycle"

* tag 'flexible-array-transformations-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
  treewide: Replace zero-length arrays with flexible-array members

Pull ARM SoC updates from Arnd Bergmann:
 "SoC specific code is generally used for older platforms that don't
  (yet) use device tree to do the same things.

   - Support is added for i.MXRT10xx, a Cortex-M7 based microcontroller
     from NXP. At the moment this is still incomplete as other portions
     are merged through different trees.

   - Long abandoned support for running NOMMU ARMv4 or ARMv5 platforms
     gets removed, now the Arm NOMMU platforms are limited to the
     Cortex-M family of microcontrollers

   - Two old PXA boards get removed, along with corresponding driver
     bits.

   - Continued cleanup of the Intel IXP4xx platforms, removing some
     remnants of the old board files.

   - Minor Cleanups and fixes for Orion, PXA, MMP, Mstar, Samsung

   - CPU idle support for AT91

   - A system controller driver for Polarfire"

* tag 'arm-soc-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (29 commits)
  ARM: remove support for NOMMU ARMv4/v5
  ARM: PXA: fix up decompressor code
  soc: microchip: make mpfs_sys_controller_put static
  ARM: pxa: remove Intel Imote2 and Stargate 2 boards
  ARM: mmp: Fix failure to remove sram device
  ARM: mstar: Select ARM_ERRATA_814220
  soc: add microchip polarfire soc system controller
  ARM: at91: Kconfig: select PM_OPP
  ARM: at91: PM: add cpu idle support for sama7g5
  ARM: at91: ddr: fix typo to align with datasheet naming
  ARM: at91: ddr: align macro definitions
  ARM: at91: ddr: remove CONFIG_SOC_SAMA7 dependency
  ARM: ixp4xx: Convert to SPARSE_IRQ and P2V
  ARM: ixp4xx: Drop all common code
  ARM: ixp4xx: Drop custom DMA coherency and bouncing
  ARM: ixp4xx: Remove feature bit accessors
  net: ixp4xx_hss: Check features using syscon
  net: ixp4xx_eth: Drop platform data support
  soc: ixp4xx-npe: Access syscon regs using regmap
  soc: ixp4xx: Add features from regmap helper
  ...

Pull crypto updates from Herbert Xu:
 "API:
   - hwrng core now credits for low-quality RNG devices.

  Algorithms:
   - Optimisations for neon aes on arm/arm64.
   - Add accelerated crc32_be on arm64.
   - Add ffdheXYZ(dh) templates.
   - Disallow hmac keys < 112 bits in FIPS mode.
   - Add AVX assembly implementation for sm3 on x86.

  Drivers:
   - Add missing local_bh_disable calls for crypto_engine callback.
   - Ensure BH is disabled in crypto_engine callback path.
   - Fix zero length DMA mappings in ccree.
   - Add synchronization between mailbox accesses in octeontx2.
   - Add Xilinx SHA3 driver.
   - Add support for the TDES IP available on sama7g5 SoC in atmel"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (137 commits)
  crypto: xilinx - Turn SHA into a tristate and allow COMPILE_TEST
  MAINTAINERS: update HPRE/SEC2/TRNG driver maintainers list
  crypto: dh - Remove the unused function dh_safe_prime_dh_alg()
  hwrng: nomadik - Change clk_disable to clk_disable_unprepare
  crypto: arm64 - cleanup comments
  crypto: qat - fix initialization of pfvf rts_map_msg structures
  crypto: qat - fix initialization of pfvf cap_msg structures
  crypto: qat - remove unneeded assignment
  crypto: qat - disable registration of algorithms
  crypto: hisilicon/qm - fix memset during queues clearing
  crypto: xilinx: prevent probing on non-xilinx hardware
  crypto: marvell/octeontx - Use swap() instead of open coding it
  crypto: ccree - Fix use after free in cc_cipher_exit()
  crypto: ccp - ccp_dmaengine_unregister release dma channels
  crypto: octeontx2 - fix missing unlock
  hwrng: cavium - fix NULL but dereferenced coccicheck error
  crypto: cavium/nitrox - don't cast parameter in bit operations
  crypto: vmx - add missing dependencies
  MAINTAINERS: Add maintainer for Xilinx ZynqMP SHA3 driver
  crypto: xilinx - Add Xilinx SHA3 driver
  ...

We use VF QM state register to record the status of the QM configuration
state. This will be used in the ACC migration driver to determine whether
we can safely save and restore the QM data.

Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Acked-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Link: https://lore.kernel.org/r/20220308184902.2242-8-shameerali.kolothum.thodi@huawei.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>