linux.git/drivers/crypto, branch v3.10-rc2

Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6

2013-05-02T21:53:12+00:00

Pull crypto update from Herbert Xu:

 - XTS mode optimisation for twofish/cast6/camellia/aes on x86

 - AVX2/x86_64 implementation for blowfish/twofish/serpent/camellia

 - SSSE3/AVX/AVX2 optimisations for sha256/sha512

 - Added driver for SAHARA2 crypto accelerator

 - Fix for GMAC when used in non-IPsec secnarios

 - Added generic CMAC implementation (including IPsec glue)

 - IP update for crypto/atmel

 - Support for more than one device in hwrng/timeriomem

 - Added Broadcom BCM2835 RNG driver

 - Misc fixes

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (59 commits)
  crypto: caam - fix job ring cleanup code
  crypto: camellia - add AVX2/AES-NI/x86_64 assembler implementation of camellia cipher
  crypto: serpent - add AVX2/x86_64 assembler implementation of serpent cipher
  crypto: twofish - add AVX2/x86_64 assembler implementation of twofish cipher
  crypto: blowfish - add AVX2/x86_64 implementation of blowfish cipher
  crypto: tcrypt - add async cipher speed tests for blowfish
  crypto: testmgr - extend camellia test-vectors for camellia-aesni/avx2
  crypto: aesni_intel - fix Kconfig problem with CRYPTO_GLUE_HELPER_X86
  crypto: aesni_intel - add more optimized XTS mode for x86-64
  crypto: x86/camellia-aesni-avx - add more optimized XTS code
  crypto: cast6-avx: use new optimized XTS code
  crypto: x86/twofish-avx - use optimized XTS code
  crypto: x86 - add more optimized XTS-mode for serpent-avx
  xfrm: add rfc4494 AES-CMAC-96 support
  crypto: add CMAC support to CryptoAPI
  crypto: testmgr - add empty test vectors for null ciphers
  crypto: testmgr - add AES GMAC test vectors
  crypto: gcm - fix rfc4543 to handle async crypto correctly
  crypto: gcm - make GMAC work when dst and src are different
  hwrng: timeriomem - added devicetree hooks
  ...

Merge tag 'multiplatform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2013-05-02T16:38:16+00:00

Pull ARM SoC multiplatform updates from Olof Johansson:
 "More multiplatform enablement for ARM platforms.  The ones converted
  in this branch are:

   - bcm2835
   - cns3xxx
   - sirf
   - nomadik
   - msx
   - spear
   - tegra
   - ux500

  We're getting close to having most of them converted!

  One of the larger platforms remaining is Samsung Exynos, and there are
  a bunch of supporting patches in this merge window for it.  There was
  a patch in this branch to a early version of multiplatform conversion,
  but it ended up being reverted due to need of more bake time.  The
  revert commit is part of the branch since it would have required
  rebasing multiple dependent branches and they were stable by then"

* tag 'multiplatform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (70 commits)
  mmc: sdhci-s3c: Fix operation on non-single image Samsung platforms
  clocksource: nomadik-mtu: fix up clocksource/timer
  Revert "ARM: exynos: enable multiplatform support"
  ARM: SPEAr13xx: Fix typo "ARCH_HAVE_CPUFREQ"
  ARM: exynos: enable multiplatform support
  rtc: s3c: make header file local
  mtd: onenand/samsung: make regs-onenand.h file local
  thermal/exynos: remove unnecessary header inclusions
  mmc: sdhci-s3c: remove platform dependencies
  ARM: samsung: move mfc device definition to s5p-dev-mfc.c
  ARM: exynos: move debug-macro.S to include/debug/
  ARM: exynos: prepare for sparse IRQ
  ARM: exynos: introduce EXYNOS_ATAGS symbol
  ARM: tegra: build assembly files with -march=armv7-a
  ARM: Push selects for TWD/SCU into machine entries
  ARM: ux500: build hotplug.o for ARMv7-a
  ARM: ux500: move to multiplatform
  ARM: ux500: make remaining headers local
  ARM: ux500: make irqs.h local to platform
  ARM: ux500: get rid of 
  ...

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial

2013-04-30T16:36:50+00:00

Pull trivial tree updates from Jiri Kosina:
 "Usual stuff, mostly comment fixes, typo fixes, printk fixes and small
  code cleanups"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (45 commits)
  mm: Convert print_symbol to %pSR
  gfs2: Convert print_symbol to %pSR
  m32r: Convert print_symbol to %pSR
  iostats.txt: add easy-to-find description for field 6
  x86 cmpxchg.h: fix wrong comment
  treewide: Fix typo in printk and comments
  doc: devicetree: Fix various typos
  docbook: fix 8250 naming in device-drivers
  pata_pdc2027x: Fix compiler warning
  treewide: Fix typo in printks
  mei: Fix comments in drivers/misc/mei
  treewide: Fix typos in kernel messages
  pm44xx: Fix comment for "CONFIG_CPU_IDLE"
  doc: Fix typo "CONFIG_CGROUP_CGROUP_MEMCG_SWAP"
  mmzone: correct "pags" to "pages" in comment.
  kernel-parameters: remove outdated 'noresidual' parameter
  Remove spurious _H suffixes from ifdef comments
  sound: Remove stray pluses from Kconfig file
  radio-shark: Fix printk "CONFIG_LED_CLASS"
  doc: put proper reference to CONFIG_MODULE_SIG_ENFORCE
  ...

crypto: caam - fix job ring cleanup code

2013-04-25T13:09:07+00:00

The job ring init function creates a platform device for each job ring.
While the job ring is shutdown, e.g. while caam module removal, its
platform device was not being removed. This leads to failure while
reinsertion and then removal of caam module second time.

The following kernel crash dump appears when caam module is reinserted
and then removed again. This patch fixes it.

root@p4080ds:~# rmmod caam.ko
Unable to handle kernel paging request for data at address 0x00000008
Faulting instruction address: 0xf94aca18
Oops: Kernel access of bad area, sig: 11 [#1]
SMP NR_CPUS=8 P4080 DS
Modules linked in: caam(-) qoriq_dbg(O) [last unloaded: caam]
NIP: f94aca18 LR: f94aca18 CTR: c029f950
REGS: eac47d60 TRAP: 0300   Tainted: G           O  (3.8.4-rt2)
MSR: 00029002   CR: 22022484  XER: 20000000
DEAR: 00000008, ESR: 00000000
TASK = e49dfaf0[2110] 'rmmod' THREAD: eac46000 CPU: 1
GPR00: f94ad3f4 eac47e10 e49dfaf0 00000000 00000005 ea2ac210 ffffffff 00000000
GPR08: c286de68 e4977ce0 c029b1c0 00000001 c029f950 10029738 00000000 100e0000
GPR16: 00000000 10023d00 1000cbdc 1000cb8c 1000cbb8 00000000 c07dfecc 00000000
GPR24: c07e0000 00000000 1000cbd8 f94e0000 ffffffff 00000000 ea53cd40 00000000
NIP [f94aca18] caam_reset_hw_jr+0x18/0x1c0 [caam]
LR [f94aca18] caam_reset_hw_jr+0x18/0x1c0 [caam]
Call Trace:
[eac47e10] [eac47e30] 0xeac47e30 (unreliable)
[eac47e20] [f94ad3f4] caam_jr_shutdown+0x34/0x220 [caam]
[eac47e60] [f94ac0e4] caam_remove+0x54/0xb0 [caam]
[eac47e80] [c029fb38] __device_release_driver+0x68/0x120
[eac47e90] [c02a05c8] driver_detach+0xd8/0xe0
[eac47eb0] [c029f8e0] bus_remove_driver+0xa0/0x110
[eac47ed0] [c00768e4] sys_delete_module+0x144/0x270
[eac47f40] [c000e2f0] ret_from_syscall+0x0/0x3c

Signed-off-by: Vakul Garg 
Signed-off-by: Bharat Bhushan 
Reviewed-by: Horia Geanta 
Signed-off-by: Herbert Xu

crypto: caam - static constify error data

2013-04-25T13:01:43+00:00

checkstack reports report_deco_status(), report_ccb_status() as
particularly excessive stack users.  Move their lookup tables
off the stack and put them in .rodata.

Signed-off-by: Kim Phillips 
Signed-off-by: Herbert Xu

crypto: caam - change key gen functions to return signed int

2013-04-25T13:01:43+00:00

commit 2af8f4a "crypto: caam - coccicheck fixes" added error
return values yet neglected to change the type from unsigned.

Signed-off-by: Kim Phillips 
Signed-off-by: Herbert Xu

Merge branch 'mxs/cleanup' into next/multiplatform

2013-04-09T14:02:14+00:00

This is a dependency for mxs/multiplatform

Signed-off-by: Arnd Bergmann 

Conflicts:
	drivers/clocksource/Makefile

ARM: ux500: get rid of

2013-04-08T11:59:28+00:00

This removes  and 
from the Ux500, merging them into the local include
"db8500-regs.h" in mach-ux500. There is some impact
outside the ux500 machine, but most of it is dealt with
in earlier patches.

Contains portions of a clean-up patch from Arnd Bergmann.

Cc: Samuel Ortiz 
Cc: Ulf Hansson 
Acked-by: Mike Turquette 
Signed-off-by: Arnd Bergmann 
Signed-off-by: Linus Walleij

crypto: ux500 - add missing comma

2013-04-05T13:02:17+00:00

Commit 4f31f5b19eb0418a847b989abc9ac22af1991fe2
"PM / crypto / ux500: Use struct dev_pm_ops for power management"
add a new line to the driver struct but missed to add a
trailing comma, causing build errors when crypto is
selected. This adds the missing comma.

This was not noticed until now because the crypto block
is not in the ux500 defconfig. A separate patch will
be submitted to fix this.

Cc:  # 3.8.x
Cc: Rafael J. Wysocki 
Cc: Magnus Myrstedt 
Signed-off-by: Linus Walleij 
Signed-off-by: Herbert Xu

crypto: ux500 - fix error return code in hash_dma_final()

2013-04-03T01:06:28+00:00

Fix to return a negative error code from the error handling
case instead of 0, as returned elsewhere in this function.

Signed-off-by: Wei Yongjun 
Acked-by: Linus Walleij 
Signed-off-by: Herbert Xu