linux.git/drivers/crypto/caam/intern.h, branch v4.2 Linux kernel source tree crypto: caam - Dynamic allocation of addresses for various memory blocks in CAAM. 2014-09-15T11:44:11+00:00 Nitesh Narayan Lal b44382@freescale.com 2014-09-01T09:30:44+00:00 fb4562b20894444288152e6de67c28adac6c789d CAAM's memory is broken into following address blocks: Block Included Registers 0 General Registers 1-4 Job ring registers 6 RTIC registers 7 QI registers 8 DECO and CCB Size of the above stated blocks varies in various platforms. The block size can be 4K or 64K. The block size can be dynamically determined by reading CTPR register in CAAM. This patch initializes the block addresses dynamically based on the value read from this register. Signed-off-by: Ruchika Gupta <r66431@freescale.com> Signed-off-by: Nitesh Narayan Lal <b44382@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> 
CAAM's memory is broken into following address blocks:
Block           Included Registers
0               General Registers
1-4             Job ring registers
6               RTIC registers
7               QI registers
8               DECO and CCB

Size of the above stated blocks varies in various platforms. The block size can be 4K or 64K.
The block size can be dynamically determined by reading CTPR register in CAAM.
This patch initializes the block addresses dynamically based on the value read from this register.

Signed-off-by: Ruchika Gupta <r66431@freescale.com>
Signed-off-by: Nitesh Narayan Lal <b44382@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
crypto: caam - Configuration for platforms with virtualization enabled in CAAM 2014-06-25T13:38:39+00:00 Ruchika Gupta ruchika.gupta@freescale.com 2014-06-23T12:12:33+00:00 17157c90a8abf9323ee2a3daac7ad9f696642dda For platforms with virtualization enabled 1. The job ring registers can be written to only is the job ring has been started i.e STARTR bit in JRSTART register is 1 2. For DECO's under direct software control, with virtualization enabled PL, BMT, ICID and SDID values need to be provided. These are provided by selecting a Job ring in start mode whose parameters would be used for the DECO access programming. Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> 
For platforms with virtualization enabled

    1. The job ring registers can be written to only is the job ring has been
       started i.e STARTR bit in JRSTART register is 1

    2. For DECO's under direct software control, with virtualization enabled
       PL, BMT, ICID and SDID values need to be provided. These are provided by
       selecting a Job ring in start mode whose parameters would be used for the
       DECO access programming.

Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
crypto: caam - Modify the interface layers to use JR API's 2013-10-30T04:02:58+00:00 Ruchika Gupta ruchika.gupta@freescale.com 2013-10-25T06:31:03+00:00 cfc6f11b768a9bdda17aac280474de1f0e344fea - Earlier interface layers - caamalg, caamhash, caamrng were directly using the Controller driver private structure to access the Job ring. - Changed the above to use alloc/free API's provided by Job Ring Drive Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com> Reviewed-by: Garg Vakul-B16394 <vakul@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> 
- Earlier interface layers - caamalg, caamhash, caamrng were
  directly using the Controller driver private structure to access
  the Job ring.
- Changed the above to use alloc/free API's provided by Job Ring Drive

Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com>
Reviewed-by: Garg Vakul-B16394 <vakul@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
crypto: caam - Add API's to allocate/free Job Rings 2013-10-30T04:02:57+00:00 Ruchika Gupta ruchika.gupta@freescale.com 2013-10-25T06:31:02+00:00 07defbfb0fd662272dff5207001a0a5e09aeaeec With each of the Job Ring available as a platform device, the Job Ring driver needs to take care of allocation/deallocation of the Job Rings to the above interface layers. Added APIs in Job Ring Driver to allocate/free Job rings Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com> Reviewed-by: Garg Vakul-B16394 <vakul@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> 
With each of the Job Ring available as a platform device, the
Job Ring driver needs to take care of allocation/deallocation
of the Job Rings to the above interface layers. Added APIs
in Job Ring Driver to allocate/free Job rings

Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com>
Reviewed-by: Garg Vakul-B16394 <vakul@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
crypto: caam - Add Platform driver for Job Ring 2013-10-30T04:02:57+00:00 Ruchika Gupta ruchika.gupta@freescale.com 2013-10-25T06:31:01+00:00 313ea293e9c4d1eabcaddd2c0800f083b03c2a2e The SEC Job Rings are now available as individual devices. This would enable sharing of job rings between kernel and user space. Job Rings can now be dynamically bound/unbound from kernel. Changes are made in the following layers of CAAM Driver 1. Controller driver - Does basic initialization of CAAM Block. - Creates platform devices for Job Rings. (Earlier the initialization of Job ring was done by the controller driver) 2. JobRing Platform driver - Manages the platform Job Ring devices created by the controller driver Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com> Reviewed-by: Garg Vakul-B16394 <vakul@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> 
The SEC Job Rings are now available as individual devices.
This would enable sharing of job rings between kernel and
user space. Job Rings can now be dynamically bound/unbound
from kernel.

Changes are made in the following layers of CAAM Driver
1. Controller driver
        - Does basic initialization of CAAM Block.
        - Creates platform devices for Job Rings.
(Earlier the initialization of Job ring  was done
 by the controller driver)

2. JobRing Platform driver
        - Manages the platform Job Ring devices created
          by the controller driver

Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com>
Reviewed-by: Garg Vakul-B16394 <vakul@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
crypto: caam - enable instantiation of all RNG4 state handles 2013-09-13T11:43:56+00:00 Alex Porosanu alexandru.porosanu@freescale.com 2013-09-09T15:56:34+00:00 1005bccd7a4a6345d995449b77cb1ba748ff9a28 RNG4 block contains multiple (i.e. 2) state handles that can be initialized. This patch adds the necessary code for detecting which of the two state handles has been instantiated by another piece of software e.g. u-boot and instantiate the other one (or both if none was instantiated). Only the state handle(s) instantiated by this driver will be deinstantiated when removing the module. Signed-off-by: Alex Porosanu <alexandru.porosanu@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> 
RNG4 block contains multiple (i.e. 2) state handles that can be
initialized. This patch adds the necessary code for detecting
which of the two state handles has been instantiated by another
piece of software e.g. u-boot and instantiate the other one (or
both if none was instantiated). Only the state handle(s)
instantiated by this driver will be deinstantiated when removing
the module.

Signed-off-by: Alex Porosanu <alexandru.porosanu@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
crypto: caam - uninstantiate RNG state handle 0 if instantiated by caam driver 2013-09-13T11:43:55+00:00 Alex Porosanu alexandru.porosanu@freescale.com 2013-09-09T15:56:32+00:00 b1f996e0b3b00c98f0ac8ffef1a6572cbc735bbc If the caam driver module instantiates the RNG state handle 0, then upon the removal of the module, the RNG state handle is left initialized. This patch takes care of reverting the state of the handle back to its previous uninstantatied state. Signed-off-by: Alex Porosanu <alexandru.porosanu@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> 
If the caam driver module instantiates the RNG state handle 0, then
upon the removal of the module, the RNG state handle is left
initialized. This patch takes care of reverting the state of the
handle back to its previous uninstantatied state.

Signed-off-by: Alex Porosanu <alexandru.porosanu@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
crypto: caam - Remove unused functions from Job Ring 2013-08-01T00:55:40+00:00 Ruchika Gupta ruchika.gupta@freescale.com 2013-07-31T10:18:56+00:00 6dad41158db696d77eb17df12d5b1f3e196a7f2f Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> 
Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
crypto: caam - fix job ring cleanup code 2013-04-25T13:09:07+00:00 Vakul Garg vakul@freescale.com 2013-04-15T04:25:51+00:00 3862de1f6c442d53bd828d39f86d07d933a70605 The job ring init function creates a platform device for each job ring. While the job ring is shutdown, e.g. while caam module removal, its platform device was not being removed. This leads to failure while reinsertion and then removal of caam module second time. The following kernel crash dump appears when caam module is reinserted and then removed again. This patch fixes it. root@p4080ds:~# rmmod caam.ko Unable to handle kernel paging request for data at address 0x00000008 Faulting instruction address: 0xf94aca18 Oops: Kernel access of bad area, sig: 11 [#1] SMP NR_CPUS=8 P4080 DS Modules linked in: caam(-) qoriq_dbg(O) [last unloaded: caam] NIP: f94aca18 LR: f94aca18 CTR: c029f950 REGS: eac47d60 TRAP: 0300 Tainted: G O (3.8.4-rt2) MSR: 00029002 <CE,EE,ME> CR: 22022484 XER: 20000000 DEAR: 00000008, ESR: 00000000 TASK = e49dfaf0[2110] 'rmmod' THREAD: eac46000 CPU: 1 GPR00: f94ad3f4 eac47e10 e49dfaf0 00000000 00000005 ea2ac210 ffffffff 00000000 GPR08: c286de68 e4977ce0 c029b1c0 00000001 c029f950 10029738 00000000 100e0000 GPR16: 00000000 10023d00 1000cbdc 1000cb8c 1000cbb8 00000000 c07dfecc 00000000 GPR24: c07e0000 00000000 1000cbd8 f94e0000 ffffffff 00000000 ea53cd40 00000000 NIP [f94aca18] caam_reset_hw_jr+0x18/0x1c0 [caam] LR [f94aca18] caam_reset_hw_jr+0x18/0x1c0 [caam] Call Trace: [eac47e10] [eac47e30] 0xeac47e30 (unreliable) [eac47e20] [f94ad3f4] caam_jr_shutdown+0x34/0x220 [caam] [eac47e60] [f94ac0e4] caam_remove+0x54/0xb0 [caam] [eac47e80] [c029fb38] __device_release_driver+0x68/0x120 [eac47e90] [c02a05c8] driver_detach+0xd8/0xe0 [eac47eb0] [c029f8e0] bus_remove_driver+0xa0/0x110 [eac47ed0] [c00768e4] sys_delete_module+0x144/0x270 [eac47f40] [c000e2f0] ret_from_syscall+0x0/0x3c Signed-off-by: Vakul Garg <vakul@freescale.com> Signed-off-by: Bharat Bhushan <bharat.bhushan@freescale.com> Reviewed-by: Horia Geanta <horia.geanta@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> 
The job ring init function creates a platform device for each job ring.
While the job ring is shutdown, e.g. while caam module removal, its
platform device was not being removed. This leads to failure while
reinsertion and then removal of caam module second time.

The following kernel crash dump appears when caam module is reinserted
and then removed again. This patch fixes it.

root@p4080ds:~# rmmod caam.ko
Unable to handle kernel paging request for data at address 0x00000008
Faulting instruction address: 0xf94aca18
Oops: Kernel access of bad area, sig: 11 [#1]
SMP NR_CPUS=8 P4080 DS
Modules linked in: caam(-) qoriq_dbg(O) [last unloaded: caam]
NIP: f94aca18 LR: f94aca18 CTR: c029f950
REGS: eac47d60 TRAP: 0300   Tainted: G           O  (3.8.4-rt2)
MSR: 00029002 <CE,EE,ME>  CR: 22022484  XER: 20000000
DEAR: 00000008, ESR: 00000000
TASK = e49dfaf0[2110] 'rmmod' THREAD: eac46000 CPU: 1
GPR00: f94ad3f4 eac47e10 e49dfaf0 00000000 00000005 ea2ac210 ffffffff 00000000
GPR08: c286de68 e4977ce0 c029b1c0 00000001 c029f950 10029738 00000000 100e0000
GPR16: 00000000 10023d00 1000cbdc 1000cb8c 1000cbb8 00000000 c07dfecc 00000000
GPR24: c07e0000 00000000 1000cbd8 f94e0000 ffffffff 00000000 ea53cd40 00000000
NIP [f94aca18] caam_reset_hw_jr+0x18/0x1c0 [caam]
LR [f94aca18] caam_reset_hw_jr+0x18/0x1c0 [caam]
Call Trace:
[eac47e10] [eac47e30] 0xeac47e30 (unreliable)
[eac47e20] [f94ad3f4] caam_jr_shutdown+0x34/0x220 [caam]
[eac47e60] [f94ac0e4] caam_remove+0x54/0xb0 [caam]
[eac47e80] [c029fb38] __device_release_driver+0x68/0x120
[eac47e90] [c02a05c8] driver_detach+0xd8/0xe0
[eac47eb0] [c029f8e0] bus_remove_driver+0xa0/0x110
[eac47ed0] [c00768e4] sys_delete_module+0x144/0x270
[eac47f40] [c000e2f0] ret_from_syscall+0x0/0x3c

Signed-off-by: Vakul Garg <vakul@freescale.com>
Signed-off-by: Bharat Bhushan <bharat.bhushan@freescale.com>
Reviewed-by: Horia Geanta <horia.geanta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
crypto: caam - one tasklet per job ring 2012-06-27T06:42:07+00:00 Kim Phillips kim.phillips@freescale.com 2012-06-23T00:48:57+00:00 a0ca6ca022ac197e159bb5d22a08e3c3aebb242c there is no noticeable benefit for multiple cores to process one job ring's output ring: in fact, we can benefit from cache effects of having the back-half stay on the core that receives a particular ring's interrupts, and further relax general contention and the locking involved with reading outring_used, since tasklets run atomically. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> 
there is no noticeable benefit for multiple cores to process one
job ring's output ring: in fact, we can benefit from cache effects
of having the back-half stay on the core that receives a particular
ring's interrupts, and further relax general contention and the
locking involved with reading outring_used, since tasklets run
atomically.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>