linux.git/drivers/crypto/caam/caamalg.c, branch v5.9 Linux kernel source tree crypto: caam - silence .setkey in case of bad key length 2020-07-31T08:25:27+00:00 Horia Geantă horia.geanta@nxp.com 2020-07-22T12:14:55+00:00 da6a66853a381864f4b040832cf11f0dbba0a097 In case of bad key length, driver emits "key size mismatch" messages, but only for xts(aes) algorithms. Reduce verbosity by making them visible only when debugging. This way crypto fuzz testing log cleans up a bit. Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> 
In case of bad key length, driver emits "key size mismatch" messages,
but only for xts(aes) algorithms.

Reduce verbosity by making them visible only when debugging.
This way crypto fuzz testing log cleans up a bit.

Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
crypto: drivers - set the flag CRYPTO_ALG_ALLOCATES_MEMORY 2020-07-16T11:49:10+00:00 Mikulas Patocka mpatocka@redhat.com 2020-07-10T06:20:41+00:00 b8aa7dc5c7535f9abfca4bceb0ade9ee10cf5f54 Set the flag CRYPTO_ALG_ALLOCATES_MEMORY in the crypto drivers that allocate memory. drivers/crypto/allwinner/sun8i-ce/sun8i-ce-core.c: sun8i_ce_cipher drivers/crypto/allwinner/sun8i-ss/sun8i-ss-core.c: sun8i_ss_cipher drivers/crypto/amlogic/amlogic-gxl-core.c: meson_cipher drivers/crypto/axis/artpec6_crypto.c: artpec6_crypto_common_init drivers/crypto/bcm/cipher.c: spu_skcipher_rx_sg_create drivers/crypto/caam/caamalg.c: aead_edesc_alloc drivers/crypto/caam/caamalg_qi.c: aead_edesc_alloc drivers/crypto/caam/caamalg_qi2.c: aead_edesc_alloc drivers/crypto/caam/caamhash.c: hash_digest_key drivers/crypto/cavium/cpt/cptvf_algs.c: process_request drivers/crypto/cavium/nitrox/nitrox_aead.c: nitrox_process_se_request drivers/crypto/cavium/nitrox/nitrox_skcipher.c: nitrox_process_se_request drivers/crypto/ccp/ccp-crypto-aes-cmac.c: ccp_do_cmac_update drivers/crypto/ccp/ccp-crypto-aes-galois.c: ccp_crypto_enqueue_request drivers/crypto/ccp/ccp-crypto-aes-xts.c: ccp_crypto_enqueue_request drivers/crypto/ccp/ccp-crypto-aes.c: ccp_crypto_enqueue_request drivers/crypto/ccp/ccp-crypto-des3.c: ccp_crypto_enqueue_request drivers/crypto/ccp/ccp-crypto-sha.c: ccp_crypto_enqueue_request drivers/crypto/chelsio/chcr_algo.c: create_cipher_wr drivers/crypto/hisilicon/sec/sec_algs.c: sec_alloc_and_fill_hw_sgl drivers/crypto/hisilicon/sec2/sec_crypto.c: sec_alloc_req_id drivers/crypto/inside-secure/safexcel_cipher.c: safexcel_queue_req drivers/crypto/inside-secure/safexcel_hash.c: safexcel_ahash_enqueue drivers/crypto/ixp4xx_crypto.c: ablk_perform drivers/crypto/marvell/cesa/cipher.c: mv_cesa_skcipher_dma_req_init drivers/crypto/marvell/cesa/hash.c: mv_cesa_ahash_dma_req_init drivers/crypto/marvell/octeontx/otx_cptvf_algs.c: create_ctx_hdr drivers/crypto/n2_core.c: n2_compute_chunks drivers/crypto/picoxcell_crypto.c: spacc_sg_to_ddt drivers/crypto/qat/qat_common/qat_algs.c: qat_alg_skcipher_encrypt drivers/crypto/qce/skcipher.c: qce_skcipher_async_req_handle drivers/crypto/talitos.c : talitos_edesc_alloc drivers/crypto/virtio/virtio_crypto_algs.c: __virtio_crypto_skcipher_do_req drivers/crypto/xilinx/zynqmp-aes-gcm.c: zynqmp_aes_aead_cipher Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> [EB: avoid overly-long lines] Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> 
Set the flag CRYPTO_ALG_ALLOCATES_MEMORY in the crypto drivers that
allocate memory.

drivers/crypto/allwinner/sun8i-ce/sun8i-ce-core.c: sun8i_ce_cipher
drivers/crypto/allwinner/sun8i-ss/sun8i-ss-core.c: sun8i_ss_cipher
drivers/crypto/amlogic/amlogic-gxl-core.c: meson_cipher
drivers/crypto/axis/artpec6_crypto.c: artpec6_crypto_common_init
drivers/crypto/bcm/cipher.c: spu_skcipher_rx_sg_create
drivers/crypto/caam/caamalg.c: aead_edesc_alloc
drivers/crypto/caam/caamalg_qi.c: aead_edesc_alloc
drivers/crypto/caam/caamalg_qi2.c: aead_edesc_alloc
drivers/crypto/caam/caamhash.c: hash_digest_key
drivers/crypto/cavium/cpt/cptvf_algs.c: process_request
drivers/crypto/cavium/nitrox/nitrox_aead.c: nitrox_process_se_request
drivers/crypto/cavium/nitrox/nitrox_skcipher.c: nitrox_process_se_request
drivers/crypto/ccp/ccp-crypto-aes-cmac.c: ccp_do_cmac_update
drivers/crypto/ccp/ccp-crypto-aes-galois.c: ccp_crypto_enqueue_request
drivers/crypto/ccp/ccp-crypto-aes-xts.c: ccp_crypto_enqueue_request
drivers/crypto/ccp/ccp-crypto-aes.c: ccp_crypto_enqueue_request
drivers/crypto/ccp/ccp-crypto-des3.c: ccp_crypto_enqueue_request
drivers/crypto/ccp/ccp-crypto-sha.c: ccp_crypto_enqueue_request
drivers/crypto/chelsio/chcr_algo.c: create_cipher_wr
drivers/crypto/hisilicon/sec/sec_algs.c: sec_alloc_and_fill_hw_sgl
drivers/crypto/hisilicon/sec2/sec_crypto.c: sec_alloc_req_id
drivers/crypto/inside-secure/safexcel_cipher.c: safexcel_queue_req
drivers/crypto/inside-secure/safexcel_hash.c: safexcel_ahash_enqueue
drivers/crypto/ixp4xx_crypto.c: ablk_perform
drivers/crypto/marvell/cesa/cipher.c: mv_cesa_skcipher_dma_req_init
drivers/crypto/marvell/cesa/hash.c: mv_cesa_ahash_dma_req_init
drivers/crypto/marvell/octeontx/otx_cptvf_algs.c: create_ctx_hdr
drivers/crypto/n2_core.c: n2_compute_chunks
drivers/crypto/picoxcell_crypto.c: spacc_sg_to_ddt
drivers/crypto/qat/qat_common/qat_algs.c: qat_alg_skcipher_encrypt
drivers/crypto/qce/skcipher.c: qce_skcipher_async_req_handle
drivers/crypto/talitos.c : talitos_edesc_alloc
drivers/crypto/virtio/virtio_crypto_algs.c: __virtio_crypto_skcipher_do_req
drivers/crypto/xilinx/zynqmp-aes-gcm.c: zynqmp_aes_aead_cipher

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
[EB: avoid overly-long lines]
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
crypto: caam - Remove broken arc4 support 2020-07-16T11:49:00+00:00 Herbert Xu herbert@gondor.apana.org.au 2020-07-16T11:45:03+00:00 eeedb618378f8a09779546a3eeac16b000447d62 The arc4 algorithm requires storing state in the request context in order to allow more than one encrypt/decrypt operation. As this driver does not seem to do that, it means that using it for more than one operation is broken. Fixes: eaed71a44ad9 ("crypto: caam - add ecb(*) support") Link: https://lore.kernel.org/linux-crypto/CAMj1kXGvMe_A_iQ43Pmygg9xaAM-RLy=_M=v+eg--8xNmv9P+w@mail.gmail.com Link: https://lore.kernel.org/linux-crypto/20200702101947.682-1-ardb@kernel.org Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Ard Biesheuvel <ardb@kernel.org> Acked-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> 
The arc4 algorithm requires storing state in the request context
in order to allow more than one encrypt/decrypt operation.  As this
driver does not seem to do that, it means that using it for more
than one operation is broken.

Fixes: eaed71a44ad9 ("crypto: caam - add ecb(*) support")
Link: https://lore.kernel.org/linux-crypto/CAMj1kXGvMe_A_iQ43Pmygg9xaAM-RLy=_M=v+eg--8xNmv9P+w@mail.gmail.com
Link: https://lore.kernel.org/linux-crypto/20200702101947.682-1-ardb@kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
crypto: caam - fix the address of the last entry of S/G 2020-04-16T06:48:56+00:00 Iuliana Prodan iuliana.prodan@nxp.com 2020-04-07T15:58:45+00:00 55b3209acbb01cb02b1ee6b1afe80d83b1aab36d For skcipher algorithms, the input, output HW S/G tables look like this: [IV, src][dst, IV] Now, we can have 2 conditions here: - there is no IV; - src and dst are equal (in-place encryption) and scattered and the error is an "off-by-one" in the HW S/G table. This issue was seen with KASAN: BUG: KASAN: slab-out-of-bounds in skcipher_edesc_alloc+0x95c/0x1018 Read of size 4 at addr ffff000022a02958 by task cryptomgr_test/321 CPU: 2 PID: 321 Comm: cryptomgr_test Not tainted 5.6.0-rc1-00165-ge4ef8383-dirty #4 Hardware name: LS1046A RDB Board (DT) Call trace: dump_backtrace+0x0/0x260 show_stack+0x14/0x20 dump_stack+0xe8/0x144 print_address_description.isra.11+0x64/0x348 __kasan_report+0x11c/0x230 kasan_report+0xc/0x18 __asan_load4+0x90/0xb0 skcipher_edesc_alloc+0x95c/0x1018 skcipher_encrypt+0x84/0x150 crypto_skcipher_encrypt+0x50/0x68 test_skcipher_vec_cfg+0x4d4/0xc10 test_skcipher_vec+0x178/0x1d8 alg_test_skcipher+0xec/0x230 alg_test.part.44+0x114/0x4a0 alg_test+0x1c/0x60 cryptomgr_test+0x34/0x58 kthread+0x1b8/0x1c0 ret_from_fork+0x10/0x18 Allocated by task 321: save_stack+0x24/0xb0 __kasan_kmalloc.isra.10+0xc4/0xe0 kasan_kmalloc+0xc/0x18 __kmalloc+0x178/0x2b8 skcipher_edesc_alloc+0x21c/0x1018 skcipher_encrypt+0x84/0x150 crypto_skcipher_encrypt+0x50/0x68 test_skcipher_vec_cfg+0x4d4/0xc10 test_skcipher_vec+0x178/0x1d8 alg_test_skcipher+0xec/0x230 alg_test.part.44+0x114/0x4a0 alg_test+0x1c/0x60 cryptomgr_test+0x34/0x58 kthread+0x1b8/0x1c0 ret_from_fork+0x10/0x18 Freed by task 0: (stack is not available) The buggy address belongs to the object at ffff000022a02800 which belongs to the cache dma-kmalloc-512 of size 512 The buggy address is located 344 bytes inside of 512-byte region [ffff000022a02800, ffff000022a02a00) The buggy address belongs to the page: page:fffffe00006a8000 refcount:1 mapcount:0 mapping:ffff00093200c400 index:0x0 compound_mapcount: 0 flags: 0xffff00000010200(slab|head) raw: 0ffff00000010200 dead000000000100 dead000000000122 ffff00093200c400 raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff000022a02800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff000022a02880: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffff000022a02900: 00 00 00 00 00 00 00 00 00 00 fc fc fc fc fc fc ^ ffff000022a02980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff000022a02a00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc Fixes: 334d37c9e263 ("crypto: caam - update IV using HW support") Cc: <stable@vger.kernel.org> # v5.3+ Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com> Reviewed-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> 
For skcipher algorithms, the input, output HW S/G tables
look like this: [IV, src][dst, IV]
Now, we can have 2 conditions here:
- there is no IV;
- src and dst are equal (in-place encryption) and scattered
and the error is an "off-by-one" in the HW S/G table.

This issue was seen with KASAN:
BUG: KASAN: slab-out-of-bounds in skcipher_edesc_alloc+0x95c/0x1018

Read of size 4 at addr ffff000022a02958 by task cryptomgr_test/321

CPU: 2 PID: 321 Comm: cryptomgr_test Not tainted
5.6.0-rc1-00165-ge4ef8383-dirty #4
Hardware name: LS1046A RDB Board (DT)
Call trace:
 dump_backtrace+0x0/0x260
 show_stack+0x14/0x20
 dump_stack+0xe8/0x144
 print_address_description.isra.11+0x64/0x348
 __kasan_report+0x11c/0x230
 kasan_report+0xc/0x18
 __asan_load4+0x90/0xb0
 skcipher_edesc_alloc+0x95c/0x1018
 skcipher_encrypt+0x84/0x150
 crypto_skcipher_encrypt+0x50/0x68
 test_skcipher_vec_cfg+0x4d4/0xc10
 test_skcipher_vec+0x178/0x1d8
 alg_test_skcipher+0xec/0x230
 alg_test.part.44+0x114/0x4a0
 alg_test+0x1c/0x60
 cryptomgr_test+0x34/0x58
 kthread+0x1b8/0x1c0
 ret_from_fork+0x10/0x18

Allocated by task 321:
 save_stack+0x24/0xb0
 __kasan_kmalloc.isra.10+0xc4/0xe0
 kasan_kmalloc+0xc/0x18
 __kmalloc+0x178/0x2b8
 skcipher_edesc_alloc+0x21c/0x1018
 skcipher_encrypt+0x84/0x150
 crypto_skcipher_encrypt+0x50/0x68
 test_skcipher_vec_cfg+0x4d4/0xc10
 test_skcipher_vec+0x178/0x1d8
 alg_test_skcipher+0xec/0x230
 alg_test.part.44+0x114/0x4a0
 alg_test+0x1c/0x60
 cryptomgr_test+0x34/0x58
 kthread+0x1b8/0x1c0
 ret_from_fork+0x10/0x18

Freed by task 0:
(stack is not available)

The buggy address belongs to the object at ffff000022a02800
 which belongs to the cache dma-kmalloc-512 of size 512
The buggy address is located 344 bytes inside of
 512-byte region [ffff000022a02800, ffff000022a02a00)
The buggy address belongs to the page:
page:fffffe00006a8000 refcount:1 mapcount:0 mapping:ffff00093200c400
index:0x0 compound_mapcount: 0
flags: 0xffff00000010200(slab|head)
raw: 0ffff00000010200 dead000000000100 dead000000000122 ffff00093200c400
raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff000022a02800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 ffff000022a02880: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff000022a02900: 00 00 00 00 00 00 00 00 00 00 fc fc fc fc fc fc
                                                    ^
 ffff000022a02980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 ffff000022a02a00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc

Fixes: 334d37c9e263 ("crypto: caam - update IV using HW support")
Cc: <stable@vger.kernel.org> # v5.3+
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
crypto: caam - fix use-after-free KASAN issue for AEAD algorithms 2020-04-16T06:48:56+00:00 Iuliana Prodan iuliana.prodan@nxp.com 2020-04-06T22:47:26+00:00 5ed1e8b8877f259e4f2053cd59d133a9de6e2250 Here's the KASAN report: BUG: KASAN: use-after-free in aead_crypt_done+0x60/0xd8 Read of size 1 at addr ffff00002303f014 by task swapper/0/0 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.6.0-rc1-00162-gfcb90d5 #58 Hardware name: LS1046A RDB Board (DT) Call trace: dump_backtrace+0x0/0x260 show_stack+0x14/0x20 dump_stack+0xe8/0x144 print_address_description.isra.11+0x64/0x348 __kasan_report+0x11c/0x230 kasan_report+0xc/0x18 __asan_load1+0x5c/0x68 aead_crypt_done+0x60/0xd8 caam_jr_dequeue+0x390/0x608 tasklet_action_common.isra.13+0x1ec/0x230 tasklet_action+0x24/0x30 efi_header_end+0x1a4/0x370 irq_exit+0x114/0x128 __handle_domain_irq+0x80/0xe0 gic_handle_irq+0x50/0xa0 el1_irq+0xb8/0x180 _raw_spin_unlock_irq+0x2c/0x78 finish_task_switch+0xa4/0x2f8 __schedule+0x3a4/0x890 schedule_idle+0x28/0x50 do_idle+0x22c/0x338 cpu_startup_entry+0x24/0x40 rest_init+0xf8/0x10c arch_call_rest_init+0xc/0x14 start_kernel+0x774/0x7b4 Allocated by task 263: save_stack+0x24/0xb0 __kasan_kmalloc.isra.10+0xc4/0xe0 kasan_kmalloc+0xc/0x18 __kmalloc+0x178/0x2b8 aead_edesc_alloc+0x1b4/0xbf0 ipsec_gcm_encrypt+0xd4/0x140 crypto_aead_encrypt+0x50/0x68 test_aead_vec_cfg+0x498/0xec0 test_aead_vec+0x110/0x200 alg_test_aead+0xfc/0x680 alg_test.part.44+0x114/0x4a0 alg_test+0x1c/0x60 cryptomgr_test+0x34/0x58 kthread+0x1b8/0x1c0 ret_from_fork+0x10/0x18 Freed by task 0: save_stack+0x24/0xb0 __kasan_slab_free+0x10c/0x188 kasan_slab_free+0x10/0x18 kfree+0x7c/0x298 aead_crypt_done+0x58/0xd8 caam_jr_dequeue+0x390/0x608 tasklet_action_common.isra.13+0x1ec/0x230 tasklet_action+0x24/0x30 efi_header_end+0x1a4/0x370 The buggy address belongs to the object at ffff00002303f000 which belongs to the cache dma-kmalloc-128 of size 128 The buggy address is located 20 bytes inside of 128-byte region [ffff00002303f000, ffff00002303f080) The buggy address belongs to the page: page:fffffe00006c0fc0 refcount:1 mapcount:0 mapping:ffff00093200c000 index:0x0 flags: 0xffff00000000200(slab) raw: 0ffff00000000200 dead000000000100 dead000000000122 ffff00093200c000 raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff00002303ef00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff00002303ef80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff >ffff00002303f000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff00002303f080: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff00002303f100: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc Fixes: 1c2402266713 ("crypto: caam - add crypto_engine support for AEAD algorithms") Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> 
Here's the KASAN report:
BUG: KASAN: use-after-free in aead_crypt_done+0x60/0xd8
Read of size 1 at addr ffff00002303f014 by task swapper/0/0

CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.6.0-rc1-00162-gfcb90d5 #58
Hardware name: LS1046A RDB Board (DT)
Call trace:
 dump_backtrace+0x0/0x260
 show_stack+0x14/0x20
 dump_stack+0xe8/0x144
 print_address_description.isra.11+0x64/0x348
 __kasan_report+0x11c/0x230
 kasan_report+0xc/0x18
 __asan_load1+0x5c/0x68
 aead_crypt_done+0x60/0xd8
 caam_jr_dequeue+0x390/0x608
 tasklet_action_common.isra.13+0x1ec/0x230
 tasklet_action+0x24/0x30
 efi_header_end+0x1a4/0x370
 irq_exit+0x114/0x128
 __handle_domain_irq+0x80/0xe0
 gic_handle_irq+0x50/0xa0
 el1_irq+0xb8/0x180
 _raw_spin_unlock_irq+0x2c/0x78
 finish_task_switch+0xa4/0x2f8
 __schedule+0x3a4/0x890
 schedule_idle+0x28/0x50
 do_idle+0x22c/0x338
 cpu_startup_entry+0x24/0x40
 rest_init+0xf8/0x10c
 arch_call_rest_init+0xc/0x14
 start_kernel+0x774/0x7b4

Allocated by task 263:
 save_stack+0x24/0xb0
 __kasan_kmalloc.isra.10+0xc4/0xe0
 kasan_kmalloc+0xc/0x18
 __kmalloc+0x178/0x2b8
 aead_edesc_alloc+0x1b4/0xbf0
 ipsec_gcm_encrypt+0xd4/0x140
 crypto_aead_encrypt+0x50/0x68
 test_aead_vec_cfg+0x498/0xec0
 test_aead_vec+0x110/0x200
 alg_test_aead+0xfc/0x680
 alg_test.part.44+0x114/0x4a0
 alg_test+0x1c/0x60
 cryptomgr_test+0x34/0x58
 kthread+0x1b8/0x1c0
 ret_from_fork+0x10/0x18

Freed by task 0:
 save_stack+0x24/0xb0
 __kasan_slab_free+0x10c/0x188
 kasan_slab_free+0x10/0x18
 kfree+0x7c/0x298
 aead_crypt_done+0x58/0xd8
 caam_jr_dequeue+0x390/0x608
 tasklet_action_common.isra.13+0x1ec/0x230
 tasklet_action+0x24/0x30
 efi_header_end+0x1a4/0x370

The buggy address belongs to the object at ffff00002303f000
 which belongs to the cache dma-kmalloc-128 of size 128
The buggy address is located 20 bytes inside of
 128-byte region [ffff00002303f000, ffff00002303f080)
The buggy address belongs to the page:
page:fffffe00006c0fc0 refcount:1 mapcount:0 mapping:ffff00093200c000 index:0x0
flags: 0xffff00000000200(slab)
raw: 0ffff00000000200 dead000000000100 dead000000000122 ffff00093200c000
raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff00002303ef00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 ffff00002303ef80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>ffff00002303f000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                         ^
 ffff00002303f080: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 ffff00002303f100: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc

Fixes: 1c2402266713 ("crypto: caam - add crypto_engine support for AEAD algorithms")
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
crypto: caam - fix use-after-free KASAN issue for SKCIPHER algorithms 2020-04-16T06:48:56+00:00 Iuliana Prodan iuliana.prodan@nxp.com 2020-04-06T22:47:25+00:00 5af4e8d448a8c78fdb7d63a4f55b7acd1f7fa974 Here's the KASAN report: BUG: KASAN: use-after-free in skcipher_crypt_done+0xe8/0x1a8 Read of size 1 at addr ffff00002304001c by task swapper/0/0 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.6.0-rc1-00162-gfcb90d5 #57 Hardware name: LS1046A RDB Board (DT) Call trace: dump_backtrace+0x0/0x260 show_stack+0x14/0x20 dump_stack+0xe8/0x144 print_address_description.isra.11+0x64/0x348 __kasan_report+0x11c/0x230 kasan_report+0xc/0x18 __asan_load1+0x5c/0x68 skcipher_crypt_done+0xe8/0x1a8 caam_jr_dequeue+0x390/0x608 tasklet_action_common.isra.13+0x1ec/0x230 tasklet_action+0x24/0x30 efi_header_end+0x1a4/0x370 irq_exit+0x114/0x128 __handle_domain_irq+0x80/0xe0 gic_handle_irq+0x50/0xa0 el1_irq+0xb8/0x180 _raw_spin_unlock_irq+0x2c/0x78 finish_task_switch+0xa4/0x2f8 __schedule+0x3a4/0x890 schedule_idle+0x28/0x50 do_idle+0x22c/0x338 cpu_startup_entry+0x24/0x40 rest_init+0xf8/0x10c arch_call_rest_init+0xc/0x14 start_kernel+0x774/0x7b4 Allocated by task 263: save_stack+0x24/0xb0 __kasan_kmalloc.isra.10+0xc4/0xe0 kasan_kmalloc+0xc/0x18 __kmalloc+0x178/0x2b8 skcipher_edesc_alloc+0x21c/0x1018 skcipher_encrypt+0x84/0x150 crypto_skcipher_encrypt+0x50/0x68 test_skcipher_vec_cfg+0x4d4/0xc10 test_skcipher_vec+0xf8/0x1d8 alg_test_skcipher+0xec/0x230 alg_test.part.44+0x114/0x4a0 alg_test+0x1c/0x60 cryptomgr_test+0x34/0x58 kthread+0x1b8/0x1c0 ret_from_fork+0x10/0x18 Freed by task 0: save_stack+0x24/0xb0 __kasan_slab_free+0x10c/0x188 kasan_slab_free+0x10/0x18 kfree+0x7c/0x298 skcipher_crypt_done+0xe0/0x1a8 caam_jr_dequeue+0x390/0x608 tasklet_action_common.isra.13+0x1ec/0x230 tasklet_action+0x24/0x30 efi_header_end+0x1a4/0x370 The buggy address belongs to the object at ffff000023040000 which belongs to the cache dma-kmalloc-512 of size 512 The buggy address is located 28 bytes inside of 512-byte region [ffff000023040000, ffff000023040200) The buggy address belongs to the page: page:fffffe00006c1000 refcount:1 mapcount:0 mapping:ffff00093200c400 index:0x0 compound_mapcount: 0 flags: 0xffff00000010200(slab|head) raw: 0ffff00000010200 dead000000000100 dead000000000122 ffff00093200c400 raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff00002303ff00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff00002303ff80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff >ffff000023040000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff000023040080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff000023040100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb Fixes: ee38767f152a ("crypto: caam - support crypto_engine framework for SKCIPHER algorithms") Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> 
Here's the KASAN report:
BUG: KASAN: use-after-free in skcipher_crypt_done+0xe8/0x1a8
Read of size 1 at addr ffff00002304001c by task swapper/0/0

CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.6.0-rc1-00162-gfcb90d5 #57
Hardware name: LS1046A RDB Board (DT)
Call trace:
 dump_backtrace+0x0/0x260
 show_stack+0x14/0x20
 dump_stack+0xe8/0x144
 print_address_description.isra.11+0x64/0x348
 __kasan_report+0x11c/0x230
 kasan_report+0xc/0x18
 __asan_load1+0x5c/0x68
 skcipher_crypt_done+0xe8/0x1a8
 caam_jr_dequeue+0x390/0x608
 tasklet_action_common.isra.13+0x1ec/0x230
 tasklet_action+0x24/0x30
 efi_header_end+0x1a4/0x370
 irq_exit+0x114/0x128
 __handle_domain_irq+0x80/0xe0
 gic_handle_irq+0x50/0xa0
 el1_irq+0xb8/0x180
 _raw_spin_unlock_irq+0x2c/0x78
 finish_task_switch+0xa4/0x2f8
 __schedule+0x3a4/0x890
 schedule_idle+0x28/0x50
 do_idle+0x22c/0x338
 cpu_startup_entry+0x24/0x40
 rest_init+0xf8/0x10c
 arch_call_rest_init+0xc/0x14
 start_kernel+0x774/0x7b4

Allocated by task 263:
 save_stack+0x24/0xb0
 __kasan_kmalloc.isra.10+0xc4/0xe0
 kasan_kmalloc+0xc/0x18
 __kmalloc+0x178/0x2b8
 skcipher_edesc_alloc+0x21c/0x1018
 skcipher_encrypt+0x84/0x150
 crypto_skcipher_encrypt+0x50/0x68
 test_skcipher_vec_cfg+0x4d4/0xc10
 test_skcipher_vec+0xf8/0x1d8
 alg_test_skcipher+0xec/0x230
 alg_test.part.44+0x114/0x4a0
 alg_test+0x1c/0x60
 cryptomgr_test+0x34/0x58
 kthread+0x1b8/0x1c0
 ret_from_fork+0x10/0x18

Freed by task 0:
 save_stack+0x24/0xb0
 __kasan_slab_free+0x10c/0x188
 kasan_slab_free+0x10/0x18
 kfree+0x7c/0x298
 skcipher_crypt_done+0xe0/0x1a8
 caam_jr_dequeue+0x390/0x608
 tasklet_action_common.isra.13+0x1ec/0x230
 tasklet_action+0x24/0x30
 efi_header_end+0x1a4/0x370

The buggy address belongs to the object at ffff000023040000
 which belongs to the cache dma-kmalloc-512 of size 512
The buggy address is located 28 bytes inside of
 512-byte region [ffff000023040000, ffff000023040200)
The buggy address belongs to the page:
page:fffffe00006c1000 refcount:1 mapcount:0 mapping:ffff00093200c400 index:0x0 compound_mapcount: 0
flags: 0xffff00000010200(slab|head)
raw: 0ffff00000010200 dead000000000100 dead000000000122 ffff00093200c400
raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff00002303ff00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 ffff00002303ff80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>ffff000023040000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                            ^
 ffff000023040080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff000023040100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb

Fixes: ee38767f152a ("crypto: caam - support crypto_engine framework for SKCIPHER algorithms")
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
crypto: Replace zero-length array with flexible-array member 2020-03-06T01:28:21+00:00 Gustavo A. R. Silva gustavo@embeddedor.com 2020-02-24T16:21:00+00:00 5a8a076506af03f83f83d80412a7c0b06b687ee1 The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> 
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:

struct foo {
        int stuff;
        struct boo array[];
};

By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.

Also, notice that, dynamic memory allocations won't be affected by
this change:

"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]

This issue was found with the help of Coccinelle.

[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour")

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
crypto: caam - add crypto_engine support for AEAD algorithms 2020-02-22T01:25:48+00:00 Iuliana Prodan iuliana.prodan@nxp.com 2020-02-12T17:55:22+00:00 1c24022667130eefe15d49b906373807f181305c Add crypto_engine support for AEAD algorithms, to make use of the engine queue. The requests, with backlog flag, will be listed into crypto-engine queue and processed by CAAM when free. If sending just the backlog request to crypto-engine, and non-blocking directly to CAAM, the latter requests have a better chance to be executed since JR has up to 1024 entries, more than the 10 entries from crypto-engine. Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com> Reviewed-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> 
Add crypto_engine support for AEAD algorithms, to make use of
the engine queue.
The requests, with backlog flag, will be listed into crypto-engine
queue and processed by CAAM when free.
If sending just the backlog request to crypto-engine, and non-blocking
directly to CAAM, the latter requests have a better chance to be
executed since JR has up to 1024 entries, more than the 10 entries
from crypto-engine.

Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
crypto: caam - support crypto_engine framework for SKCIPHER algorithms 2020-02-22T01:25:47+00:00 Iuliana Prodan iuliana.prodan@nxp.com 2020-02-12T17:55:21+00:00 ee38767f152a3310aabee7074848911f43bf5d69 Integrate crypto_engine into CAAM, to make use of the engine queue. Add support for SKCIPHER algorithms. This is intended to be used for CAAM backlogging support. The requests, with backlog flag (e.g. from dm-crypt) will be listed into crypto-engine queue and processed by CAAM when free. This changes the return codes for enqueuing a request: -EINPROGRESS if OK, -EBUSY if request is backlogged (via crypto-engine), -ENOSPC if the queue is full, -EIO if it cannot map the caller's descriptor. The requests, with backlog flag, will be listed into crypto-engine queue and processed by CAAM when free. Only the backlog request are sent to crypto-engine since the others can be handled by CAAM, if free, especially since JR has up to 1024 entries (more than the 10 entries from crypto-engine). Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com> Signed-off-by: Franck LENORMAND <franck.lenormand@nxp.com> Reviewed-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> 
Integrate crypto_engine into CAAM, to make use of the engine queue.
Add support for SKCIPHER algorithms.

This is intended to be used for CAAM backlogging support.
The requests, with backlog flag (e.g. from dm-crypt) will be listed
into crypto-engine queue and processed by CAAM when free.
This changes the return codes for enqueuing a request:
-EINPROGRESS if OK, -EBUSY if request is backlogged (via
crypto-engine), -ENOSPC if the queue is full, -EIO if it
cannot map the caller's descriptor.

The requests, with backlog flag, will be listed into crypto-engine
queue and processed by CAAM when free. Only the backlog request are
sent to crypto-engine since the others can be handled by CAAM, if free,
especially since JR has up to 1024 entries (more than the 10 entries
from crypto-engine).

Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Franck LENORMAND <franck.lenormand@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
crypto: caam - change return code in caam_jr_enqueue function 2020-02-22T01:25:47+00:00 Iuliana Prodan iuliana.prodan@nxp.com 2020-02-12T17:55:20+00:00 4d370a1036958d7df9f1492c345b4984a4eba7f6 Based on commit 6b80ea389a0b ("crypto: change transient busy return code to -ENOSPC"), change the return code of caam_jr_enqueue function to -EINPROGRESS, in case of success, -ENOSPC in case the CAAM is busy (has no space left in job ring queue), -EIO if it cannot map the caller's descriptor. Update, also, the cases for resource-freeing for each algorithm type. This is done for later use, on backlogging support in CAAM. Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com> Reviewed-by: Horia Geanta <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> 
Based on commit 6b80ea389a0b ("crypto: change transient busy return code to -ENOSPC"),
change the return code of caam_jr_enqueue function to -EINPROGRESS, in
case of success, -ENOSPC in case the CAAM is busy (has no space left
in job ring queue), -EIO if it cannot map the caller's descriptor.

Update, also, the cases for resource-freeing for each algorithm type.

This is done for later use, on backlogging support in CAAM.

Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Horia Geanta <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>