linux.git/drivers/cpufreq, branch vsnprintf Linux kernel source tree cpufreq/amd-pstate: Use boost numerator for upper bound of frequencies 2024-12-10T16:17:43+00:00 Mario Limonciello mario.limonciello@amd.com 2024-12-09T18:52:35+00:00 2993b29b2a98f2bc9d55dfd37ef39f56a2908748 commit 18d9b5227121 ("cpufreq/amd-pstate: Use nominal perf for limits when boost is disabled") introduced different semantics for min/max limits based upon whether the user turned off boost from sysfs. This however is not necessary when the highest perf value is the boost numerator. Suggested-by: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com> Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Fixes: 18d9b5227121 ("cpufreq/amd-pstate: Use nominal perf for limits when boost is disabled") Link: https://lore.kernel.org/r/20241209185248.16301-3-mario.limonciello@amd.com Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> 
commit 18d9b5227121 ("cpufreq/amd-pstate: Use nominal perf for limits
when boost is disabled") introduced different semantics for min/max limits
based upon whether the user turned off boost from sysfs.

This however is not necessary when the highest perf value is the boost
numerator.

Suggested-by: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Fixes: 18d9b5227121 ("cpufreq/amd-pstate: Use nominal perf for limits when boost is disabled")
Link: https://lore.kernel.org/r/20241209185248.16301-3-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
cpufreq/amd-pstate: Store the boost numerator as highest perf again 2024-12-10T16:17:43+00:00 Mario Limonciello mario.limonciello@amd.com 2024-12-09T18:52:34+00:00 50a062a7620051c09adacd6d140ebd56881a333b commit ad4caad58d91d ("cpufreq: amd-pstate: Merge amd_pstate_highest_perf_set() into amd_get_boost_ratio_numerator()") changed the semantics for highest perf and commit 18d9b52271213 ("cpufreq/amd-pstate: Use nominal perf for limits when boost is disabled") worked around those semantic changes. This however is a confusing result and furthermore makes it awkward to change frequency limits and boost due to the scaling differences. Restore the boost numerator to highest perf again. Suggested-by: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com> Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Fixes: ad4caad58d91 ("cpufreq: amd-pstate: Merge amd_pstate_highest_perf_set() into amd_get_boost_ratio_numerator()") Link: https://lore.kernel.org/r/20241209185248.16301-2-mario.limonciello@amd.com Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> 
commit ad4caad58d91d ("cpufreq: amd-pstate: Merge
amd_pstate_highest_perf_set() into amd_get_boost_ratio_numerator()")
changed the semantics for highest perf and commit 18d9b52271213
("cpufreq/amd-pstate: Use nominal perf for limits when boost is disabled")
worked around those semantic changes.

This however is a confusing result and furthermore makes it awkward to
change frequency limits and boost due to the scaling differences. Restore
the boost numerator to highest perf again.

Suggested-by: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Fixes: ad4caad58d91 ("cpufreq: amd-pstate: Merge amd_pstate_highest_perf_set() into amd_get_boost_ratio_numerator()")
Link: https://lore.kernel.org/r/20241209185248.16301-2-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
cpufreq/amd-pstate: Detect preferred core support before driver registration 2024-12-10T03:57:34+00:00 K Prateek Nayak kprateek.nayak@amd.com 2024-12-10T03:25:57+00:00 919bfa9b2dbf3bc0c478afd4e44445836381dacb Booting with amd-pstate on 3rd Generation EPYC system incorrectly enabled ITMT support despite the system not supporting Preferred Core ranking. amd_pstate_init_prefcore() called during amd_pstate*_cpu_init() requires "amd_pstate_prefcore" to be set correctly however the preferred core support is detected only after driver registration which is too late. Swap the function calls around to detect preferred core support before registring the driver via amd_pstate_register_driver(). This ensures amd_pstate*_cpu_init() sees the correct value of "amd_pstate_prefcore" considering the platform support. Fixes: 279f838a61f9 ("x86/amd: Detect preferred cores in amd_get_boost_ratio_numerator()") Fixes: ff2653ded4d9 ("cpufreq/amd-pstate: Move registration after static function call update") Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com> Acked-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20241210032557.754-1-kprateek.nayak@amd.com Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> 
Booting with amd-pstate on 3rd Generation EPYC system incorrectly
enabled ITMT support despite the system not supporting Preferred Core
ranking. amd_pstate_init_prefcore() called during amd_pstate*_cpu_init()
requires "amd_pstate_prefcore" to be set correctly however the preferred
core support is detected only after driver registration which is too
late.

Swap the function calls around to detect preferred core support before
registring the driver via amd_pstate_register_driver(). This ensures
amd_pstate*_cpu_init() sees the correct value of "amd_pstate_prefcore"
considering the platform support.

Fixes: 279f838a61f9 ("x86/amd: Detect preferred cores in amd_get_boost_ratio_numerator()")
Fixes: ff2653ded4d9 ("cpufreq/amd-pstate: Move registration after static function call update")
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Acked-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20241210032557.754-1-kprateek.nayak@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Merge tag 'powerpc-6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux 2024-11-23T18:44:31+00:00 Linus Torvalds torvalds@linux-foundation.org 2024-11-23T18:44:31+00:00 42d9e8b7ccddee75989283cf7477305cfe3776ff Pull powerpc updates from Michael Ellerman: - Rework kfence support for the HPT MMU to work on systems with >= 16TB of RAM. - Remove the powerpc "maple" platform, used by the "Yellow Dog Powerstation". - Add support for DYNAMIC_FTRACE_WITH_CALL_OPS, DYNAMIC_FTRACE_WITH_DIRECT_CALLS & BPF Trampolines. - Add support for running KVM nested guests on Power11. - Other small features, cleanups and fixes. Thanks to Amit Machhiwal, Arnd Bergmann, Christophe Leroy, Costa Shulyupin, David Hunter, David Wang, Disha Goel, Gautam Menghani, Geert Uytterhoeven, Hari Bathini, Julia Lawall, Kajol Jain, Keith Packard, Lukas Bulwahn, Madhavan Srinivasan, Markus Elfring, Michal Suchanek, Ming Lei, Mukesh Kumar Chaurasiya, Nathan Chancellor, Naveen N Rao, Nicholas Piggin, Nysal Jan K.A, Paulo Miguel Almeida, Pavithra Prakash, Ritesh Harjani (IBM), Rob Herring (Arm), Sachin P Bappalige, Shen Lichuan, Simon Horman, Sourabh Jain, Thomas Weißschuh, Thorsten Blum, Thorsten Leemhuis, Venkat Rao Bagalkote, Zhang Zekun, and zhang jiao. * tag 'powerpc-6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (89 commits) EDAC/powerpc: Remove PPC_MAPLE drivers powerpc/perf: Add per-task/process monitoring to vpa_pmu driver powerpc/kvm: Add vpa latency counters to kvm_vcpu_arch docs: ABI: sysfs-bus-event_source-devices-vpa-pmu: Document sysfs event format entries for vpa_pmu powerpc/perf: Add perf interface to expose vpa counters MAINTAINERS: powerpc: Mark Maddy as "M" powerpc/Makefile: Allow overriding CPP powerpc-km82xx.c: replace of_node_put() with __free ps3: Correct some typos in comments powerpc/kexec: Fix return of uninitialized variable macintosh: Use common error handling code in via_pmu_led_init() powerpc/powermac: Use of_property_match_string() in pmac_has_backlight_type() powerpc: remove dead config options for MPC85xx platform support powerpc/xive: Use cpumask_intersects() selftests/powerpc: Remove the path after initialization. powerpc/xmon: symbol lookup length fixed powerpc/ep8248e: Use %pa to format resource_size_t powerpc/ps3: Reorganize kerneldoc parameter names KVM: PPC: Book3S HV: Fix kmv -> kvm typo powerpc/sstep: make emulate_vsx_load and emulate_vsx_store static ... 
Pull powerpc updates from Michael Ellerman:

 - Rework kfence support for the HPT MMU to work on systems with >= 16TB
   of RAM.

 - Remove the powerpc "maple" platform, used by the "Yellow Dog
   Powerstation".

 - Add support for DYNAMIC_FTRACE_WITH_CALL_OPS,
   DYNAMIC_FTRACE_WITH_DIRECT_CALLS & BPF Trampolines.

 - Add support for running KVM nested guests on Power11.

 - Other small features, cleanups and fixes.

Thanks to Amit Machhiwal, Arnd Bergmann, Christophe Leroy, Costa
Shulyupin, David Hunter, David Wang, Disha Goel, Gautam Menghani, Geert
Uytterhoeven, Hari Bathini, Julia Lawall, Kajol Jain, Keith Packard,
Lukas Bulwahn, Madhavan Srinivasan, Markus Elfring, Michal Suchanek,
Ming Lei, Mukesh Kumar Chaurasiya, Nathan Chancellor, Naveen N Rao,
Nicholas Piggin, Nysal Jan K.A, Paulo Miguel Almeida, Pavithra Prakash,
Ritesh Harjani (IBM), Rob Herring (Arm), Sachin P Bappalige, Shen
Lichuan, Simon Horman, Sourabh Jain, Thomas Weißschuh, Thorsten Blum,
Thorsten Leemhuis, Venkat Rao Bagalkote, Zhang Zekun, and zhang jiao.

* tag 'powerpc-6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (89 commits)
  EDAC/powerpc: Remove PPC_MAPLE drivers
  powerpc/perf: Add per-task/process monitoring to vpa_pmu driver
  powerpc/kvm: Add vpa latency counters to kvm_vcpu_arch
  docs: ABI: sysfs-bus-event_source-devices-vpa-pmu: Document sysfs event format entries for vpa_pmu
  powerpc/perf: Add perf interface to expose vpa counters
  MAINTAINERS: powerpc: Mark Maddy as "M"
  powerpc/Makefile: Allow overriding CPP
  powerpc-km82xx.c: replace of_node_put() with __free
  ps3: Correct some typos in comments
  powerpc/kexec: Fix return of uninitialized variable
  macintosh: Use common error handling code in via_pmu_led_init()
  powerpc/powermac: Use of_property_match_string() in pmac_has_backlight_type()
  powerpc: remove dead config options for MPC85xx platform support
  powerpc/xive: Use cpumask_intersects()
  selftests/powerpc: Remove the path after initialization.
  powerpc/xmon: symbol lookup length fixed
  powerpc/ep8248e: Use %pa to format resource_size_t
  powerpc/ps3: Reorganize kerneldoc parameter names
  KVM: PPC: Book3S HV: Fix kmv -> kvm typo
  powerpc/sstep: make emulate_vsx_load and emulate_vsx_store static
  ...
Merge tag 'pm-6.13-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm 2024-11-23T03:29:48+00:00 Linus Torvalds torvalds@linux-foundation.org 2024-11-23T03:29:48+00:00 6f9baa9b92c2e4e28e385fa581f0511621db3f9a Pull more power management updates from Rafael Wysocki: "These mostly are updates of cpufreq drivers used on ARM platforms plus one new DT-based cpufreq driver for virtualized guests and two cpuidle changes that should not make any difference on systems currently in the field, but will be needed for future development: - Add virtual cpufreq driver for guest kernels (David Dai) - Minor cleanup to various cpufreq drivers (Andy Shevchenko, Dhruva Gole, Jie Zhan, Jinjie Ruan, Shuosheng Huang, Sibi Sankar, and Yuan Can) - Revert "cpufreq: brcmstb-avs-cpufreq: Fix initial command check" (Colin Ian King) - Improve DT bindings for qcom-hw driver (Dmitry Baryshkov, Konrad Dybcio, and Nikunj Kela) - Make cpuidle_play_dead() try all idle states with :enter_dead() callbacks and change their return type to void (Rafael Wysocki)" * tag 'pm-6.13-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (22 commits) cpuidle: Change :enter_dead() driver callback return type to void cpuidle: Do not return from cpuidle_play_dead() on callback failures arm64: dts: qcom: sc8180x: Add a SoC-specific compatible to cpufreq-hw dt-bindings: cpufreq: cpufreq-qcom-hw: Add SC8180X compatible cpufreq: sun50i: add a100 cpufreq support cpufreq: mediatek-hw: Fix wrong return value in mtk_cpufreq_get_cpu_power() cpufreq: CPPC: Fix wrong return value in cppc_get_cpu_power() cpufreq: CPPC: Fix wrong return value in cppc_get_cpu_cost() cpufreq: loongson3: Check for error code from devm_mutex_init() call cpufreq: scmi: Fix cleanup path when boost enablement fails cpufreq: CPPC: Fix possible null-ptr-deref for cppc_get_cpu_cost() cpufreq: CPPC: Fix possible null-ptr-deref for cpufreq_cpu_get_raw() Revert "cpufreq: brcmstb-avs-cpufreq: Fix initial command check" dt-bindings: cpufreq: cpufreq-qcom-hw: Add SAR2130P compatible cpufreq: add virtual-cpufreq driver dt-bindings: cpufreq: add virtual cpufreq device cpufreq: loongson2: Unregister platform_driver on failure cpufreq: ti-cpufreq: Remove revision offsets in AM62 family cpufreq: ti-cpufreq: Allow backward compatibility for efuse syscon cppc_cpufreq: Remove HiSilicon CPPC workaround ... 
Pull more power management updates from Rafael Wysocki:
 "These mostly are updates of cpufreq drivers used on ARM platforms plus
  one new DT-based cpufreq driver for virtualized guests and two cpuidle
  changes that should not make any difference on systems currently in
  the field, but will be needed for future development:

   - Add virtual cpufreq driver for guest kernels (David Dai)

   - Minor cleanup to various cpufreq drivers (Andy Shevchenko, Dhruva
     Gole, Jie Zhan, Jinjie Ruan, Shuosheng Huang, Sibi Sankar, and Yuan
     Can)

   - Revert "cpufreq: brcmstb-avs-cpufreq: Fix initial command check"
     (Colin Ian King)

   - Improve DT bindings for qcom-hw driver (Dmitry Baryshkov, Konrad
     Dybcio, and Nikunj Kela)

   - Make cpuidle_play_dead() try all idle states with :enter_dead()
     callbacks and change their return type to void (Rafael Wysocki)"

* tag 'pm-6.13-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (22 commits)
  cpuidle: Change :enter_dead() driver callback return type to void
  cpuidle: Do not return from cpuidle_play_dead() on callback failures
  arm64: dts: qcom: sc8180x: Add a SoC-specific compatible to cpufreq-hw
  dt-bindings: cpufreq: cpufreq-qcom-hw: Add SC8180X compatible
  cpufreq: sun50i: add a100 cpufreq support
  cpufreq: mediatek-hw: Fix wrong return value in mtk_cpufreq_get_cpu_power()
  cpufreq: CPPC: Fix wrong return value in cppc_get_cpu_power()
  cpufreq: CPPC: Fix wrong return value in cppc_get_cpu_cost()
  cpufreq: loongson3: Check for error code from devm_mutex_init() call
  cpufreq: scmi: Fix cleanup path when boost enablement fails
  cpufreq: CPPC: Fix possible null-ptr-deref for cppc_get_cpu_cost()
  cpufreq: CPPC: Fix possible null-ptr-deref for cpufreq_cpu_get_raw()
  Revert "cpufreq: brcmstb-avs-cpufreq: Fix initial command check"
  dt-bindings: cpufreq: cpufreq-qcom-hw: Add SAR2130P compatible
  cpufreq: add virtual-cpufreq driver
  dt-bindings: cpufreq: add virtual cpufreq device
  cpufreq: loongson2: Unregister platform_driver on failure
  cpufreq: ti-cpufreq: Remove revision offsets in AM62 family
  cpufreq: ti-cpufreq: Allow backward compatibility for efuse syscon
  cppc_cpufreq: Remove HiSilicon CPPC workaround
  ...
Merge tag 'pmdomain-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm 2024-11-20T20:44:59+00:00 Linus Torvalds torvalds@linux-foundation.org 2024-11-20T20:44:59+00:00 75f2b37dd0a0eab8e6b179d745d79824893f39fa Pull pmdomain updates from Ulf Hansson: "pmdomain core: - Set the required dev for a required OPP during genpd attach - Add support for required OPPs to dev_pm_domain_attach_list() pmdomain providers: - ti: Enable GENPD_FLAG_ACTIVE_WAKEUP flag for ti_sci PM domains - mediatek: Add support for MT6735 PM domains - mediatek: Use OF-specific regulator API to get power domain supply - qcom: Add support for the SM8750/SAR2130P/qcs615/qcs8300 rpmhpds pmdomain consumers: - Convert a couple of consumer drivers to *_pm_domain_attach|detach_list() opp core: - Rework and cleanup some code that manages required OPPs - Remove *_opp_attach|detach_genpd()" * tag 'pmdomain-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (25 commits) pmdomain: qcom: rpmhpd: Add rpmhpd support for SM8750 dt-bindings: power: qcom,rpmpd: document the SM8750 RPMh Power Domains pmdomain: imx: Use of_property_present() for non-boolean properties pmdomain: imx: gpcv2: replace dev_err() with dev_err_probe() pmdomain: ti-sci: Use scope based of_node_put() to simplify code. pmdomain: ti-sci: Add missing of_node_put() for args.np pmdomain: ti-sci: set the GENPD_FLAG_ACTIVE_WAKEUP flag for all PM domains pmdomain: mediatek: Add support for MT6735 pmdomain: qcom: rpmhpd: add support for SAR2130P dt-bindings: power: Add binding for MediaTek MT6735 power controller dt-bindings: power: rpmpd: Add SAR2130P compatible OPP: Drop redundant *_opp_attach|detach_genpd() cpufreq: qcom-nvmem: Convert to dev_pm_domain_attach|detach_list() media: venus: Convert into devm_pm_domain_attach_list() for OPP PM domain drm/tegra: gr3d: Convert into devm_pm_domain_attach_list() OPP: Drop redundant code in _link_required_opps() pmdomain: core: Set the required dev for a required OPP during genpd attach pmdomain: core: Manage the default required OPP from a separate function PM: domains: Support required OPPs in dev_pm_domain_attach_list() OPP: Rework _set_required_devs() to manage a single device per call ... 
Pull pmdomain updates from Ulf Hansson:
"pmdomain core:
   - Set the required dev for a required OPP during genpd attach
   - Add support for required OPPs to dev_pm_domain_attach_list()

  pmdomain providers:
   - ti: Enable GENPD_FLAG_ACTIVE_WAKEUP flag for ti_sci PM domains
   - mediatek: Add support for MT6735 PM domains
   - mediatek: Use OF-specific regulator API to get power domain supply
   - qcom: Add support for the SM8750/SAR2130P/qcs615/qcs8300 rpmhpds

  pmdomain consumers:
   - Convert a couple of consumer drivers to
     *_pm_domain_attach|detach_list()

  opp core:
   - Rework and cleanup some code that manages required OPPs
   - Remove *_opp_attach|detach_genpd()"

* tag 'pmdomain-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (25 commits)
  pmdomain: qcom: rpmhpd: Add rpmhpd support for SM8750
  dt-bindings: power: qcom,rpmpd: document the SM8750 RPMh Power Domains
  pmdomain: imx: Use of_property_present() for non-boolean properties
  pmdomain: imx: gpcv2: replace dev_err() with dev_err_probe()
  pmdomain: ti-sci: Use scope based of_node_put() to simplify code.
  pmdomain: ti-sci: Add missing of_node_put() for args.np
  pmdomain: ti-sci: set the GENPD_FLAG_ACTIVE_WAKEUP flag for all PM domains
  pmdomain: mediatek: Add support for MT6735
  pmdomain: qcom: rpmhpd: add support for SAR2130P
  dt-bindings: power: Add binding for MediaTek MT6735 power controller
  dt-bindings: power: rpmpd: Add SAR2130P compatible
  OPP: Drop redundant *_opp_attach|detach_genpd()
  cpufreq: qcom-nvmem: Convert to dev_pm_domain_attach|detach_list()
  media: venus: Convert into devm_pm_domain_attach_list() for OPP PM domain
  drm/tegra: gr3d: Convert into devm_pm_domain_attach_list()
  OPP: Drop redundant code in _link_required_opps()
  pmdomain: core: Set the required dev for a required OPP during genpd attach
  pmdomain: core: Manage the default required OPP from a separate function
  PM: domains: Support required OPPs in dev_pm_domain_attach_list()
  OPP: Rework _set_required_devs() to manage a single device per call
  ...
Merge tag 'cpufreq-arm-updates-6.13' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/vireshk/pm 2024-11-19T20:35:14+00:00 Rafael J. Wysocki rafael.j.wysocki@intel.com 2024-11-19T20:35:14+00:00 baf4ae80382350ec314f5ce6742c5281a812fe00 Merge ARM cpufreq updates for 6.13 from Viresh Kumar: "- Add virtual cpufreq driver for guest kernels (David Dai). - Minor cleanup to various cpufreq drivers (Andy Shevchenko, Dhruva Gole, Jie Zhan, Jinjie Ruan, Shuosheng Huang, Sibi Sankar, and Yuan Can). - Revert "cpufreq: brcmstb-avs-cpufreq: Fix initial command check" (Colin Ian King). - Improve DT bindings for qcom-hw driver (Dmitry Baryshkov, Konrad Dybcio, and Nikunj Kela)." * tag 'cpufreq-arm-updates-6.13' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: arm64: dts: qcom: sc8180x: Add a SoC-specific compatible to cpufreq-hw dt-bindings: cpufreq: cpufreq-qcom-hw: Add SC8180X compatible cpufreq: sun50i: add a100 cpufreq support cpufreq: mediatek-hw: Fix wrong return value in mtk_cpufreq_get_cpu_power() cpufreq: CPPC: Fix wrong return value in cppc_get_cpu_power() cpufreq: CPPC: Fix wrong return value in cppc_get_cpu_cost() cpufreq: loongson3: Check for error code from devm_mutex_init() call cpufreq: scmi: Fix cleanup path when boost enablement fails cpufreq: CPPC: Fix possible null-ptr-deref for cppc_get_cpu_cost() cpufreq: CPPC: Fix possible null-ptr-deref for cpufreq_cpu_get_raw() Revert "cpufreq: brcmstb-avs-cpufreq: Fix initial command check" dt-bindings: cpufreq: cpufreq-qcom-hw: Add SAR2130P compatible cpufreq: add virtual-cpufreq driver dt-bindings: cpufreq: add virtual cpufreq device cpufreq: loongson2: Unregister platform_driver on failure cpufreq: ti-cpufreq: Remove revision offsets in AM62 family cpufreq: ti-cpufreq: Allow backward compatibility for efuse syscon cppc_cpufreq: Remove HiSilicon CPPC workaround cppc_cpufreq: Use desired perf if feedback ctrs are 0 or unchanged dt-bindings: cpufreq: qcom-hw: document support for SA8255p 
Merge ARM cpufreq updates for 6.13 from Viresh Kumar:

"- Add virtual cpufreq driver for guest kernels (David Dai).

 - Minor cleanup to various cpufreq drivers (Andy Shevchenko, Dhruva
   Gole, Jie Zhan, Jinjie Ruan, Shuosheng Huang, Sibi Sankar, and Yuan
   Can).

 - Revert "cpufreq: brcmstb-avs-cpufreq: Fix initial command check"
   (Colin Ian King).

 - Improve DT bindings for qcom-hw driver (Dmitry Baryshkov, Konrad
   Dybcio, and Nikunj Kela)."

* tag 'cpufreq-arm-updates-6.13' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
  arm64: dts: qcom: sc8180x: Add a SoC-specific compatible to cpufreq-hw
  dt-bindings: cpufreq: cpufreq-qcom-hw: Add SC8180X compatible
  cpufreq: sun50i: add a100 cpufreq support
  cpufreq: mediatek-hw: Fix wrong return value in mtk_cpufreq_get_cpu_power()
  cpufreq: CPPC: Fix wrong return value in cppc_get_cpu_power()
  cpufreq: CPPC: Fix wrong return value in cppc_get_cpu_cost()
  cpufreq: loongson3: Check for error code from devm_mutex_init() call
  cpufreq: scmi: Fix cleanup path when boost enablement fails
  cpufreq: CPPC: Fix possible null-ptr-deref for cppc_get_cpu_cost()
  cpufreq: CPPC: Fix possible null-ptr-deref for cpufreq_cpu_get_raw()
  Revert "cpufreq: brcmstb-avs-cpufreq: Fix initial command check"
  dt-bindings: cpufreq: cpufreq-qcom-hw: Add SAR2130P compatible
  cpufreq: add virtual-cpufreq driver
  dt-bindings: cpufreq: add virtual cpufreq device
  cpufreq: loongson2: Unregister platform_driver on failure
  cpufreq: ti-cpufreq: Remove revision offsets in AM62 family
  cpufreq: ti-cpufreq: Allow backward compatibility for efuse syscon
  cppc_cpufreq: Remove HiSilicon CPPC workaround
  cppc_cpufreq: Use desired perf if feedback ctrs are 0 or unchanged
  dt-bindings: cpufreq: qcom-hw: document support for SA8255p
Merge tag 'x86_cpu_for_v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 2024-11-19T20:27:19+00:00 Linus Torvalds torvalds@linux-foundation.org 2024-11-19T20:27:19+00:00 d8d78a90e7fca1ce7c90fa791400b287bc5b42a1 Pull x86 cpuid updates from Borislav Petkov: - Add a feature flag which denotes AMD CPUs supporting workload classification with the purpose of using such hints when making scheduling decisions - Determine the boost enumerator for each AMD core based on its type: efficiency or performance, in the cppc driver - Add the type of a CPU to the topology CPU descriptor with the goal of supporting and making decisions based on the type of the respective core - Add a feature flag to denote AMD cores which have heterogeneous topology and enable SD_ASYM_PACKING for those - Check microcode revisions before disabling PCID on Intel - Cleanups and fixlets * tag 'x86_cpu_for_v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cpu: Remove redundant CONFIG_NUMA guard around numa_add_cpu() x86/cpu: Fix FAM5_QUARK_X1000 to use X86_MATCH_VFM() x86/cpu: Fix formatting of cpuid_bits[] in scattered.c x86/cpufeatures: Add X86_FEATURE_AMD_WORKLOAD_CLASS feature bit x86/amd: Use heterogeneous core topology for identifying boost numerator x86/cpu: Add CPU type to struct cpuinfo_topology x86/cpu: Enable SD_ASYM_PACKING for PKG domain on AMD x86/cpufeatures: Add X86_FEATURE_AMD_HETEROGENEOUS_CORES x86/cpufeatures: Rename X86_FEATURE_FAST_CPPC to have AMD prefix x86/mm: Don't disable PCID when INVLPG has been fixed by microcode 
Pull x86 cpuid updates from Borislav Petkov:

 - Add a feature flag which denotes AMD CPUs supporting workload
   classification with the purpose of using such hints when making
   scheduling decisions

 - Determine the boost enumerator for each AMD core based on its type:
   efficiency or performance, in the cppc driver

 - Add the type of a CPU to the topology CPU descriptor with the goal of
   supporting and making decisions based on the type of the respective
   core

 - Add a feature flag to denote AMD cores which have heterogeneous
   topology and enable SD_ASYM_PACKING for those

 - Check microcode revisions before disabling PCID on Intel

 - Cleanups and fixlets

* tag 'x86_cpu_for_v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/cpu: Remove redundant CONFIG_NUMA guard around numa_add_cpu()
  x86/cpu: Fix FAM5_QUARK_X1000 to use X86_MATCH_VFM()
  x86/cpu: Fix formatting of cpuid_bits[] in scattered.c
  x86/cpufeatures: Add X86_FEATURE_AMD_WORKLOAD_CLASS feature bit
  x86/amd: Use heterogeneous core topology for identifying boost numerator
  x86/cpu: Add CPU type to struct cpuinfo_topology
  x86/cpu: Enable SD_ASYM_PACKING for PKG domain on AMD
  x86/cpufeatures: Add X86_FEATURE_AMD_HETEROGENEOUS_CORES
  x86/cpufeatures: Rename X86_FEATURE_FAST_CPPC to have AMD prefix
  x86/mm: Don't disable PCID when INVLPG has been fixed by microcode
Merge back cpufreq material for 6.13 2024-11-14T11:23:32+00:00 Rafael J. Wysocki rafael.j.wysocki@intel.com 2024-11-14T11:23:32+00:00 a8aaea4f6e1a33614854414ad37144f6eb61c6aa 






cpufreq: intel_pstate: Update Balance-performance EPP for Granite Rapids
2024-11-13T11:59:02+00:00

Srinivas Pandruvada
srinivas.pandruvada@linux.intel.com

2024-11-12T23:59:46+00:00

00e2c199cb3780357790852502a74719d14554ec

Update EPP default for balance_performance to 32.

This will give better performance out of the box using Intel P-State
powersave governor while still offering power savings compared to
performance governor.

This is in line with what has already been done for Emerald Rapids and
Sapphire Rapids.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/20241112235946.368082-1-srinivas.pandruvada@linux.intel.com
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>





Update EPP default for balance_performance to 32.

This will give better performance out of the box using Intel P-State
powersave governor while still offering power savings compared to
performance governor.

This is in line with what has already been done for Emerald Rapids and
Sapphire Rapids.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/20241112235946.368082-1-srinivas.pandruvada@linux.intel.com
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>