Pull more ACPI and power management updates from Rafael Wysocki:
 "These are a couple of regression fixes, cpuidle menu governor
  optimizations, fixes for ACPI proccessor and battery drivers,
  hibernation fix to avoid problems related to the e820 memory map,
  fixes for a few cpufreq drivers and a new version of the suspend
  profiling tool analyze_suspend.py.

  Specifics:

   - Fix for an ACPI-based device hotplug regression introduced in 3.14
     that causes a kernel panic to trigger when memory hot-remove is
     attempted with CONFIG_ACPI_HOTPLUG_MEMORY unset from Tang Chen

   - Fix for a cpufreq regression introduced in 3.16 that triggers a
     "sleeping function called from invalid context" bug in
     dev_pm_opp_init_cpufreq_table() from Stephen Boyd

   - ACPI battery driver fix for a warning message added in 3.16 that
     prints silly stuff sometimes from Mariusz Ceier

   - Hibernation fix for safer handling of mismatches in the 820 memory
     map between the configurations during image creation and during the
     subsequent restore from Chun-Yi Lee

   - ACPI processor driver fix to handle CPU hotplug notifications
     correctly during system suspend/resume from Lan Tianyu

   - Series of four cpuidle menu governor cleanups that also should
     speed it up a bit from Mel Gorman

   - Fixes for the speedstep-smi, integrator, cpu0 and arm_big_little
     cpufreq drivers from Hans Wennborg, Himangi Saraogi, Markus
     Pargmann and Uwe Kleine-König

   - Version 3.0 of the analyze_suspend.py suspend profiling tool from
     Todd E Brandt"

* tag 'pm+acpi-3.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / battery: Fix warning message in acpi_battery_get_state()
  PM / tools: analyze_suspend.py: update to v3.0
  cpufreq: arm_big_little: fix module license spec
  cpufreq: speedstep-smi: fix decimal printf specifiers
  ACPI / hotplug: Check scan handlers in acpi_scan_hot_remove()
  cpufreq: OPP: Avoid sleeping while atomic
  cpufreq: cpu0: Do not print error message when deferring
  cpufreq: integrator: Use set_cpus_allowed_ptr
  PM / hibernate: avoid unsafe pages in e820 reserved regions
  ACPI / processor: Make acpi_cpu_soft_notify() process CPU FROZEN events
  cpuidle: menu: Lookup CPU runqueues less
  cpuidle: menu: Call nr_iowait_cpu less times
  cpuidle: menu: Use ktime_to_us instead of reinventing the wheel
  cpuidle: menu: Use shifts when calculating averages where possible

Pull device tree updates from Grant Likely:
 "The branch contains the following device tree changes the v3.17 merge
  window:

  Group changes to the device tree.  In preparation for adding device
  tree overlay support, OF_DYNAMIC is reworked so that a set of device
  tree changes can be prepared and applied to the tree all at once.
  OF_RECONFIG notifiers see the most significant change here so that
  users always get a consistent view of the tree.  Notifiers generation
  is moved from before a change to after it, and notifiers for a group
  of changes are emitted after the entire block of changes have been
  applied

  Automatic console selection from DT.  Console drivers can now use
  of_console_check() to see if the device node is specified as a console
  device.  If so then it gets added as a preferred console.  UART
  devices get this support automatically when uart_add_one_port() is
  called.

  DT unit tests no longer depend on pre-loaded data in the device tree.
  Data is loaded dynamically at the start of unit tests, and then
  unloaded again when the tests have completed.

  Also contains a few bugfixes for reserved regions and early memory
  setup"

* tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux: (21 commits)
  of: Fixing OF Selftest build error
  drivers: of: add automated assignment of reserved regions to client devices
  of: Use proper types for checking memory overflow
  of: typo fix in __of_prop_dup()
  Adding selftest testdata dynamically into live tree
  of: Add todo tasklist for Devicetree
  of: Transactional DT support.
  of: Reorder device tree changes and notifiers
  of: Move dynamic node fixups out of powerpc and into common code
  of: Make sure attached nodes don't carry along extra children
  of: Make devicetree sysfs update functions consistent.
  of: Create unlocked versions of node and property add/remove functions
  OF: Utility helper functions for dynamic nodes
  of: Move CONFIG_OF_DYNAMIC code into a separate file
  of: rename of_aliases_mutex to just of_mutex
  of/platform: Fix of_platform_device_destroy iteration of devices
  of: Migrate of_find_node_by_name() users to for_each_node_by_name()
  tty: Update hypervisor tty drivers to use core stdout parsing code.
  arm/versatile: Add the uart as the stdout device.
  of: Enable console on serial ports specified by /chosen/stdout-path
  ...

Having no license specification in a module taints the kernel during load
with:

	arm_big_little: module license 'unspecified' taints kernel.

and also the linker doesn't allow it to make use of GPL-exported symbols
which in this case also results in errors like:

	arm_big_little: Unknown symbol cpufreq_register_driver (err 0)

. The header of the driver specifies a GPL v2 license, so note that
accordingly. While at it also add a description and an author and fix
the license in a companion file to explicit v2.

Reported-by: Andreas Schwab <schwab@suse.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Pull ARM SoC platform changes from Olof Johansson:
 "This is the bulk of new SoC enablement and other platform changes for
  3.17:

   - Samsung S5PV210 has been converted to DT and multiplatform
   - Clock drivers and bindings for some of the lower-end i.MX 1/2
     platforms
   - Kirkwood, one of the popular Marvell platforms, is folded into the
     mvebu platform code, removing mach-kirkwood
   - Hwmod data for TI AM43xx and DRA7 platforms
   - More additions of Renesas shmobile platform support
   - Removal of plat-samsung contents that can be removed with S5PV210
     being multiplatform/DT-enabled and the other two old platforms
     being removed

  New platforms (most with only basic support right now):

   - Hisilicon X5HD2 settop box chipset is introduced
   - Mediatek MT6589 (mobile chipset) is introduced
   - Broadcom BCM7xxx settop box chipset is introduced

  + as usual a lot other pieces all over the platform code"

* tag 'soc-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (240 commits)
  ARM: hisi: remove smp from machine descriptor
  power: reset: move hisilicon reboot code
  ARM: dts: Add hix5hd2-dkb dts file.
  ARM: debug: Rename Hi3716 to HIX5HD2
  ARM: hisi: enable hix5hd2 SoC
  ARM: hisi: add ARCH_HISI
  MAINTAINERS: add entry for Broadcom ARM STB architecture
  ARM: brcmstb: select GISB arbiter and interrupt drivers
  ARM: brcmstb: add infrastructure for ARM-based Broadcom STB SoCs
  ARM: configs: enable SMP in bcm_defconfig
  ARM: add SMP support for Broadcom mobile SoCs
  Documentation: arm: misc updates to Marvell EBU SoC status
  Documentation: arm: add URLs to public datasheets for the Marvell Armada XP SoC
  ARM: mvebu: fix build without platforms selected
  ARM: mvebu: add cpuidle support for Armada 38x
  ARM: mvebu: add cpuidle support for Armada 370
  cpuidle: mvebu: add Armada 38x support
  cpuidle: mvebu: add Armada 370 support
  cpuidle: mvebu: rename the driver from armada-370-xp to mvebu-v7
  ARM: mvebu: export the SCU address
  ...

The prefix suggests the number should be printed in hex, so use
the %x specifier to do that. Also, these are 32-bit values,
so drop the l characters.

Signed-off-by: Hans Wennborg <hans@hanshq.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Pull powerpc updates from Ben Herrenschmidt:
 "This is the powerpc new goodies for 3.17.  The short story:

  The biggest bit is Michael removing all of pre-POWER4 processor
  support from the 64-bit kernel.  POWER3 and rs64.  This gets rid of a
  ton of old cruft that has been bitrotting in a long while.  It was
  broken for quite a few versions already and nobody noticed.  Nobody
  uses those machines anymore.  While at it, he cleaned up a bunch of
  old dusty cabinets, getting rid of a skeletton or two.

  Then, we have some base VFIO support for KVM, which allows assigning
  of PCI devices to KVM guests, support for large 64-bit BARs on
  "powernv" platforms, support for HMI (Hardware Management Interrupts)
  on those same platforms, some sparse-vmemmap improvements (for memory
  hotplug),

  There is the usual batch of Freescale embedded updates (summary in the
  merge commit) and fixes here or there, I think that's it for the
  highlights"

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (102 commits)
  powerpc/eeh: Export eeh_iommu_group_to_pe()
  powerpc/eeh: Add missing #ifdef CONFIG_IOMMU_API
  powerpc: Reduce scariness of interrupt frames in stack traces
  powerpc: start loop at section start of start in vmemmap_populated()
  powerpc: implement vmemmap_free()
  powerpc: implement vmemmap_remove_mapping() for BOOK3S
  powerpc: implement vmemmap_list_free()
  powerpc: Fail remap_4k_pfn() if PFN doesn't fit inside PTE
  powerpc/book3s: Fix endianess issue for HMI handling on napping cpus.
  powerpc/book3s: handle HMIs for cpus in nap mode.
  powerpc/powernv: Invoke opal call to handle hmi.
  powerpc/book3s: Add basic infrastructure to handle HMI in Linux.
  powerpc/iommu: Fix comments with it_page_shift
  powerpc/powernv: Handle compound PE in config accessors
  powerpc/powernv: Handle compound PE for EEH
  powerpc/powernv: Handle compound PE
  powerpc/powernv: Split ioda_eeh_get_state()
  powerpc/powernv: Allow to freeze PE
  powerpc/powernv: Enable M64 aperatus for PHB3
  powerpc/eeh: Aux PE data for error log
  ...

Pull MIPS updates from Ralf Baechle:
 "This is the main pull request for 3.17.  It contains:

   - misc Cavium Octeon, BCM47xx, BCM63xx and Alchemy  updates
   - MIPS ptrace updates and cleanups
   - various fixes that will also go to -stable
   - a number of cleanups and small non-critical fixes.
   - NUMA support for the Loongson 3.
   - more support for MSA
   - support for MAAR
   - various FP enhancements and fixes"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (139 commits)
  MIPS: jz4740: remove unnecessary null test before debugfs_remove
  MIPS: Octeon: remove unnecessary null test before debugfs_remove_recursive
  MIPS: ZBOOT: implement stack protector in compressed boot phase
  MIPS: mipsreg: remove duplicate MIPS_CONF4_FTLBSETS_SHIFT
  MIPS: Bonito64: remove a duplicate define
  MIPS: Malta: initialise MAARs
  MIPS: Initialise MAARs
  MIPS: detect presence of MAARs
  MIPS: define MAAR register accessors & bits
  MIPS: mark MSA experimental
  MIPS: Don't build MSA support unless it can be used
  MIPS: consistently clear MSA flags when starting & copying threads
  MIPS: 16 byte align MSA vector context
  MIPS: disable preemption whilst initialising MSA
  MIPS: ensure MSA gets disabled during boot
  MIPS: fix read_msa_* & write_msa_* functions on non-MSA toolchains
  MIPS: fix MSA context for tasks which don't use FP first
  MIPS: init upper 64b of vector registers when MSA is first used
  MIPS: save/disable MSA in lose_fpu
  MIPS: preserve scalar FP CSR when switching vector context
  ...

We allocate the cpufreq table after calling rcu_read_lock(),
which disables preemption. This causes scheduling while atomic
warnings. Use GFP_ATOMIC instead of GFP_KERNEL and update for
kcalloc while we're here.

BUG: sleeping function called from invalid context at mm/slub.c:1246
in_atomic(): 0, irqs_disabled(): 0, pid: 80, name: modprobe
5 locks held by modprobe/80:
 #0:  (&dev->mutex){......}, at: [<c050d484>] __driver_attach+0x48/0x98
 #1:  (&dev->mutex){......}, at: [<c050d494>] __driver_attach+0x58/0x98
 #2:  (subsys mutex#5){+.+.+.}, at: [<c050c114>] subsys_interface_register+0x38/0xc8
 #3:  (cpufreq_rwsem){.+.+.+}, at: [<c05a9c8c>] __cpufreq_add_dev.isra.22+0x84/0x92c
 #4:  (rcu_read_lock){......}, at: [<c05ab24c>] dev_pm_opp_init_cpufreq_table+0x18/0x10c
Preemption disabled at:[<  (null)>]   (null)

CPU: 2 PID: 80 Comm: modprobe Not tainted 3.16.0-rc3-next-20140701-00035-g286857f216aa-dirty #217
[<c0214da8>] (unwind_backtrace) from [<c02123f8>] (show_stack+0x10/0x14)
[<c02123f8>] (show_stack) from [<c070141c>] (dump_stack+0x70/0xbc)
[<c070141c>] (dump_stack) from [<c02f4cb0>] (__kmalloc+0x124/0x250)
[<c02f4cb0>] (__kmalloc) from [<c05ab270>] (dev_pm_opp_init_cpufreq_table+0x3c/0x10c)
[<c05ab270>] (dev_pm_opp_init_cpufreq_table) from [<bf000508>] (cpufreq_init+0x48/0x378 [cpufreq_generic])
[<bf000508>] (cpufreq_init [cpufreq_generic]) from [<c05a9e08>] (__cpufreq_add_dev.isra.22+0x200/0x92c)
[<c05a9e08>] (__cpufreq_add_dev.isra.22) from [<c050c160>] (subsys_interface_register+0x84/0xc8)
[<c050c160>] (subsys_interface_register) from [<c05a9494>] (cpufreq_register_driver+0x108/0x2d8)
[<c05a9494>] (cpufreq_register_driver) from [<bf000888>] (generic_cpufreq_probe+0x50/0x74 [cpufreq_generic])
[<bf000888>] (generic_cpufreq_probe [cpufreq_generic]) from [<c050e994>] (platform_drv_probe+0x18/0x48)
[<c050e994>] (platform_drv_probe) from [<c050d1f4>] (driver_probe_device+0x128/0x370)
[<c050d1f4>] (driver_probe_device) from [<c050d4d0>] (__driver_attach+0x94/0x98)
[<c050d4d0>] (__driver_attach) from [<c050b778>] (bus_for_each_dev+0x54/0x88)
[<c050b778>] (bus_for_each_dev) from [<c050c894>] (bus_add_driver+0xe8/0x204)
[<c050c894>] (bus_add_driver) from [<c050dd48>] (driver_register+0x78/0xf4)
[<c050dd48>] (driver_register) from [<c0208870>] (do_one_initcall+0xac/0x1d8)
[<c0208870>] (do_one_initcall) from [<c028b6b4>] (load_module+0x190c/0x21e8)
[<c028b6b4>] (load_module) from [<c028c034>] (SyS_init_module+0xa4/0x110)
[<c028c034>] (SyS_init_module) from [<c020f0c0>] (ret_fast_syscall+0x0/0x48)

Fixes: a0dd7b79657b (PM / OPP: Move cpufreq specific OPP functions out of generic OPP library)
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: 3.16+ <stable@vger.kernel.org> # 3.16+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

-EPROBE_DEFER is no real error. We are just waiting unti the necessary
components are ready. The driver core infrastructure will also print an
appropriate info message.

This patch changes the error message to a debug message.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Several years ago there was an effort to convert all uses of
set_cpus_allowed to use set_cpus_allowed_ptr with the goal of eventually
removing the current definition of set_cpus_allowed and renaming
set_cpus_allowed_ptr as set_cpus_allowed
(https://lkml.org/lkml/2010/3/26/59). This is another step in this
direction.

The Coccinelle semantic patch that makes this change is as follows:

// <smpl>
@@
expression E1,E2;
@@

- set_cpus_allowed(E1, cpumask_of_cpu(E2))
+ set_cpus_allowed_ptr(E1, cpumask_of(E2))

@@
expression E;
identifier I;
@@

- set_cpus_allowed(E, I)
+ set_cpus_allowed_ptr(E, &I)
// </smpl>

Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>