William writes: First set of Counter updates for the 6.5 cycle Biggest changes in this set include the introduction of a new Intel 8254 interface library module and the refactoring of the existing 104-quad-8 modules to migrate it to the regmap API. Some other minor cleanups touching tools/counter and stm32-timer-cnt are also present. Changes * 104-quad-8 - Remove reference in Kconfig to 25-bit counter value - Utilize bitfield access macros - Refactor to buffer states for CMR, IOR, and IDR - Utilize helper functions to handle PR, FLAG and PSC - Migrate to the regmap API * i8254 - Introduce the Intel 8254 interface library module * stm32-timer-cnt - Reset TIM_TISEL to its default value in probe * tools/counter - Add .gitignore - Remove lingering 'include' directories on make clean * tag 'counter-updates-for-6.5a' of git://git.kernel.org/pub/scm/linux/kernel/git/wbg/counter: counter: i8254: Introduce the Intel 8254 interface library module counter: 104-quad-8: Migrate to the regmap API counter: 104-quad-8: Utilize helper functions to handle PR, FLAG and PSC counter: 104-quad-8: Refactor to buffer states for CMR, IOR, and IDR counter: 104-quad-8: Utilize bitfield access macros tools/counter: Makefile: Remove lingering 'include' directories on make clean tools/counter: Add .gitignore counter: stm32-timer-cnt: Reset TIM_TISEL to its default value in probe counter: 104-quad-8: Remove reference in Kconfig to 25-bit counter value
Exposes consumer library functions providing support for interfaces compatible with the venerable Intel 8254 Programmable Interval Timer (PIT). The Intel 8254 PIT first appeared in the early 1980s and was used initially in IBM PC compatibles. The popularity of the original Intel 825x family of chips led to many subsequent variants and clones of the interface in various chips and integrated circuits. Although still popular, interfaces compatible with the Intel 8254 PIT are nowdays typically found embedded in larger VLSI processing chips and FPGA components rather than as discrete ICs. A CONFIG_I8254 Kconfig option is introduced by this patch. Modules wanting access to these i8254 library functions should select this Kconfig option, and import the I8254 symbol namespace. Link: https://lore.kernel.org/r/f6fe32c2db9525d816ab1a01f45abad56c081652.1681665189.git.william.gray@linaro.org/ Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
The 104_QUAD_8 counter driver uses devm_ioport_map() without depending on HAS_IOPORT_MAP. This means the driver is not usable on platforms such as s390 which do not support I/O port mapping. Add the missing HAS_IOPORT_MAP dependency to make this explicit. Co-developed-by: Arnd Bergmann <arnd@kernel.org> Signed-off-by: Arnd Bergmann <arnd@kernel.org> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Link: https://lore.kernel.org/r/20230522105049.1467313-8-schnelle@linux.ibm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The regmap API supports IO port accessors so we can take advantage of regmap abstractions rather than handling access to the device registers directly in the driver. With regmap we get boundary checks, read-write permissions, operation synchronization locks, and more for free. Most important of all, rather than rolling our own we utilize implementations that are known to work and gain from any future improvements and fixes that come. Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/1f1f7920d2be94aedb6fdf49f429fe6137c8cb24.1681753140.git.william.gray@linaro.org/ Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
The Preset Register (PR), Flag Register (FLAG), and Filter Clock Prescaler (PSC) have common usage patterns. Wrap up such usage into dedicated functions to improve code clarity. Link: https://lore.kernel.org/r/a2d663337bf2907e0283023c06b1ddcbb32f7f6d.1681753140.git.william.gray@linaro.org/ Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
The 104-quad-8 driver buffers the device configuration states separately, however each device has only three control registers: CMR, IOR, and IDR. Refactoring to buffer the states of these control registers rather than each configuration separately results in succinct code that more closely matches what is happening on the device. Link: https://lore.kernel.org/r/48071415aed43ecdd8595174191b0d906205a9e3.1681753140.git.william.gray@linaro.org/ Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
The 104-QUAD-8 features several registers with various bitfields. Utilize bitfield access macros such as u8_get_bits() and u8_encode_bits() to make the code easier to read and the intent clearer. Suggested-by: Jonathan Cameron <jic23@kernel.org> Link: https://lore.kernel.org/r/7cea5ad049c75d8d1c6f25e288aa743a8d2a25d8.1681753140.git.william.gray@linaro.org/ Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
The driver assumes that the input selection register (TIM_TISEL) is at its reset default value. Usually this is the case, but the bootloader might have modified it. This bases on a similar patch submitted by Olivier Moysan for pwm-stm32. Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230413212339.3611722-1-u.kleine-koenig@pengutronix.de/ Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Support for 25-bit counter values was removed in commit 4aa3b75c7460
("counter: 104-quad-8: Fix race condition between FLAG and CNTR reads").
Adjust the Kconfig description of CONFIG_104_QUAD_8 to remove reference
of 25-bit counter values.
Link: https://lore.kernel.org/r/20230410134516.102886-1-william.gray@linaro.org/
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Pull MFD updates from Lee Jones: "New Drivers: - Add support for Renesas RZ/G2L MTU3 New Device Support: - Add support for Lenovo Yoga Book X90F to Intel CHT WC - Add support for MAX5970 and MAX5978 to Simple MFD (I2C) - Add support for Meteor Lake PCH-S LPSS PCI to Intel LPSS PCI - Add support for AXP15060 PMIC to X-Powers PMIC collection Remove Device Support: - Remove support for Samsung 5M8751 and S5M8763 PMIC devices New Functionality: - Convert deprecated QCOM IRQ Chip to config registers - Add support for 32-bit address spaces to Renesas SMUs Fix-ups: - Make use of APIs / MACROs designed to simplify and demystify - Add / improve Device Tree bindings - Memory saving struct layout optimisations - Remove old / deprecated functionality - Factor out unassigned register addresses from ranges - Trivial: Spelling fixes, renames and coding style fixes - Rid 'defined but not used' warnings - Remove ineffective casts and pointer stubs Bug Fixes: - Fix incorrectly non-inverted mask/unmask IRQs on QCOM platforms - Remove MODULE_*() helpers from non-tristate drivers - Do not attempt to use out-of-range memory addresses associated with io_base - Provide missing export helpers - Fix remap bulk read optimisation fallout - Fix memory leak issues in error paths" * tag 'mfd-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (88 commits) dt-bindings: mfd: ti,j721e-system-controller: Add SoC chip ID leds: bd2606mvv: Driver for the Rohm 6 Channel i2c LED driver dt-bindings: mfd: qcom,spmi-pmic: Document flash LED controller dt-bindings: mfd: x-powers,axp152: Document the AXP15060 variant mfd: axp20x: Add support for AXP15060 PMIC dt-bindings: mfd: x-powers,axp152: Document the AXP313a variant counter: rz-mtu3-cnt: Unlock on error in rz_mtu3_count_ceiling_write() dt-bindings: mfd: dlg,da9063: Document voltage monitoring dt-bindings: mfd: stm32: Remove unnecessary blank lines dt-bindings: mfd: qcom,spmi-pmic: Use generic ADC node name in examples dt-bindings: mfd: syscon: Add nuvoton,ma35d1-sys compatible MAINTAINERS: Add entries for Renesas RZ/G2L MTU3a counter driver counter: Add Renesas RZ/G2L MTU3a counter driver Documentation: ABI: sysfs-bus-counter: add cascade_counts_enable and external_input_phase_clock_select mfd: Add Renesas RZ/G2L MTU3a core driver dt-bindings: timer: Document RZ/G2L MTU3a bindings mfd: rsmu_i2c: Convert to i2c's .probe_new() again mfd: intel-lpss: Add Intel Meteor Lake PCH-S LPSS PCI IDs mfd: dln2: Fix memory leak in dln2_probe() mfd: axp20x: Fix axp288 writable-ranges ...