linux.git/drivers/clocksource, branch v4.16

clocksource/atmel-st: Add 'depends on HAS_IOMEM' to fix unmet dependency

2018-03-09T10:11:58+00:00

The ATMEL_ST config selects MFD_SYSCON, but does not depend on HAS_IOMEM.

Compile testing on architecture without HAS_IOMEM causes "unmet direct
dependencies" in Kconfig phase. Detected by "make ARCH=score allyesconfig".

Add the proper dependency to the ATMEL_ST config.

Signed-off-by: Masahiro Yamada 
Signed-off-by: Thomas Gleixner 
Cc: Daniel Lezcano 
Cc: Arnd Bergmann 
Link: https://lkml.kernel.org/r/1520335233-11277-1-git-send-email-yamada.masahiro@socionext.com

clocksource/drivers/arc_timer: Update some comments

2018-02-28T12:55:14+00:00

TIMER0 interrupt ACK is different for ARC700 and HS3x cores.

This came to light in some internal discussions and it is nice to have this
documented rather than digging up the PRM (Programmers Reference Manual).

Signed-off-by: Vineet Gupta 
Signed-off-by: Thomas Gleixner 
Cc: Daniel Lezcano 
Cc: Vineet Gupta 
Cc: linux-snps-arc@lists.infradead.org
Link: https://lkml.kernel.org/r/1519241491-12570-1-git-send-email-vgupta@synopsys.com

clocksource/drivers/mips-gic-timer: Use correct shift count to extract data

2018-02-28T12:55:14+00:00

__gic_clocksource_init() extracts the GIC_CONFIG_COUNTBITS field from
read_gic_config() by right shifting the register value. The shift count is
determined by the most significant bit (__fls) of the bitmask which is
wrong as it shifts out the complete bitfield.

Use the least significant bit (__ffs) instead to shift the bitfield down to
bit 0.

Fixes: e07127a077c7 ("clocksource: mips-gic-timer: Use new GIC accessor functions")
Signed-off-by: Felix Fietkau 
Signed-off-by: Thomas Gleixner 
Cc: daniel.lezcano@linaro.org
Cc: paul.burton@imgtec.com
Link: https://lkml.kernel.org/r/20180228095610.50341-1-nbd@nbd.name

clocksource/drivers/fsl_ftm_timer: Fix error return checking

2018-02-26T12:56:05+00:00

The error checks on freq for a negative error return always fails because
freq is unsigned and can never be negative. Fix this by making freq a
signed long.

Detected with Coccinelle:
drivers/clocksource/fsl_ftm_timer.c:287:5-9: WARNING: Unsigned expression
compared with zero: freq <= 0
drivers/clocksource/fsl_ftm_timer.c:291:5-9: WARNING: Unsigned expression
compared with zero: freq <= 0

Fixes: 2529c3a33079 ("clocksource: Add Freescale FlexTimer Module (FTM) timer support")
Signed-off-by: Colin Ian King 
Signed-off-by: Thomas Gleixner 
Cc: Daniel Lezcano 
Cc: kernel-janitors@vger.kernel.org
Link: https://lkml.kernel.org/r/20180226113614.3092-1-colin.king@canonical.com

treewide/trivial: Remove ';;$' typo noise

2018-02-22T09:59:33+00:00

On lkml suggestions were made to split up such trivial typo fixes into per subsystem
patches:

  --- a/arch/x86/boot/compressed/eboot.c
  +++ b/arch/x86/boot/compressed/eboot.c
  @@ -439,7 +439,7 @@ setup_uga32(void **uga_handle, unsigned long size, u32 *width, u32 *height)
          struct efi_uga_draw_protocol *uga = NULL, *first_uga;
          efi_guid_t uga_proto = EFI_UGA_PROTOCOL_GUID;
          unsigned long nr_ugas;
  -       u32 *handles = (u32 *)uga_handle;;
  +       u32 *handles = (u32 *)uga_handle;
          efi_status_t status = EFI_INVALID_PARAMETER;
          int i;

This patch is the result of the following script:

  $ sed -i 's/;;$/;/g' $(git grep -E ';;$'  | grep "\.[ch]:"  | grep -vwE 'for|ia64' | cut -d: -f1 | sort | uniq)

... followed by manual review to make sure it's all good.

Splitting this up is just crazy talk, let's get over with this and just do it.

Reported-by: Pavel Machek 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar

clocksource/drivers/stm32: Start the timer's counter sooner

2018-01-08T16:57:26+00:00

As we have a lot of timers on this platform, we can have potentially all the
timers enabled in the DT, so we don't want to start the timer for every probe
otherwise they will be running for nothing as only one will be used.

Start the timer only when setting the mode or when the clocksource is
enabled.

Tested-by: Benjamin Gaignard 
Signed-off-by: Daniel Lezcano 
Acked-by: Benjamin Gaignard 
Cc: Alexandre Torgue 
Cc: Linus Torvalds 
Cc: Maxime Coquelin 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Link: http://lkml.kernel.org/r/1515418139-23276-20-git-send-email-daniel.lezcano@linaro.org
Signed-off-by: Ingo Molnar

clocksource/drivers/stm32: Add the timer delay callback

2018-01-08T16:57:26+00:00

Add the timer delay callback, that saves us ~90ms of boot time.

Tested-by: Benjamin Gaignard 
Signed-off-by: Daniel Lezcano 
Acked-by: Benjamin Gaignard 
Cc: Alexandre Torgue 
Cc: Linus Torvalds 
Cc: Maxime Coquelin 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Link: http://lkml.kernel.org/r/1515418139-23276-19-git-send-email-daniel.lezcano@linaro.org
Signed-off-by: Ingo Molnar

clocksource/drivers/stm32: Add clocksource functionality

2018-01-08T16:57:26+00:00

The scene is set for the clocksource functionality, let's add it for this driver.

Tested-by: Benjamin Gaignard 
Signed-off-by: Benjamin Gaignard 
Signed-off-by: Daniel Lezcano 
Acked-by: Benjamin Gaignard 
Cc: Alexandre Torgue 
Cc: Linus Torvalds 
Cc: Maxime Coquelin 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Link: http://lkml.kernel.org/r/1515418139-23276-18-git-send-email-daniel.lezcano@linaro.org
Signed-off-by: Ingo Molnar

clocksource/drivers/stm32: Factor out more of the clockevent code

2018-01-08T16:57:26+00:00

In order to prepare the clocksource code, let's factor out the clockevent
code, split the prescaler and timer width code into separate functions.

Tested-by: Benjamin Gaignard 
Signed-off-by: Daniel Lezcano 
Acked-by: Benjamin Gaignard 
Cc: Alexandre Torgue 
Cc: Linus Torvalds 
Cc: Maxime Coquelin 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Link: http://lkml.kernel.org/r/1515418139-23276-17-git-send-email-daniel.lezcano@linaro.org
[ Small edits. ]
Signed-off-by: Ingo Molnar

clocksource/drivers/stm32: Add oneshot mode

2018-01-08T16:57:26+00:00

The stm32 timer block is able to have a counter and a comparator.

Instead of using the auto-reload register for periodic events, we switch
to oneshot mode by using the comparator register.

The timer is able to generate an interrupt when the counter overflows but
we don't want that as this counter will be use as a clocksource in the next
patches. So it is disabled by the UDIS bit of the control register.

Tested-by: Benjamin Gaignard 
Signed-off-by: Benjamin Gaignard 
Signed-off-by: Daniel Lezcano 
Acked-by: Benjamin Gaignard 
Cc: Alexandre Torgue 
Cc: Linus Torvalds 
Cc: Maxime Coquelin 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Link: http://lkml.kernel.org/r/1515418139-23276-16-git-send-email-daniel.lezcano@linaro.org
Signed-off-by: Ingo Molnar