linux.git/drivers/clocksource, branch v3.5-rc2

clocksource: em_sti: Add DT support

2012-05-25T09:32:06+00:00

Update the em-sti driver to support DT.

Signed-off-by: Magnus Damm 
Cc: arnd@arndb.de
Cc: horms@verge.net.au
Cc: johnstul@us.ibm.com
Cc: rjw@sisk.pl
Cc: lethal@linux-sh.org
Cc: gregkh@linuxfoundation.org
Cc: olof@lixom.net
Link: http://lkml.kernel.org/r/20120509143950.27521.7949.sendpatchset@w520
Signed-off-by: Thomas Gleixner

clocksource: em_sti: Emma Mobile STI driver

2012-05-25T09:32:06+00:00

The STI hardware is based on a single 48-bit 32kHz
counter that together with two individual compare
registers can generate interrupts. There are no
timer operating modes selectable which means that
the timer can not clear on match.

This driver is providing clocksource support for the
48-bit counter. Clockevents are also supported using
the same timer in oneshot mode.

Signed-off-by: Magnus Damm 
Cc: horms@verge.net.au
Cc: arnd@arndb.de
Cc: johnstul@us.ibm.com
Cc: rjw@sisk.pl
Cc: lethal@linux-sh.org
Cc: gregkh@linuxfoundation.org
Cc: olof@lixom.net
Link: http://lkml.kernel.org/r/20120525070344.23443.69756.sendpatchset@w520
Signed-off-by: Thomas Gleixner

ARM: ux500: delete U5500 support

2012-05-01T22:39:43+00:00

This platform has been obsoleted and was only available inside of
ST-Ericsson, no users of this code are left in the world. This
deletes the core U5500 support entirely in the same manner as the
obsoleted U8500 silicon was previously deleted.

The cpu_is_u5500() macros that can read out the CPU ID is left
until the next kernel cycle, this makes it possible to merge
deletion of dependent drivers without breakage.

This also has the upside of removing the mailbox driver which was
our only driver that was outside the drivers/* hiearchy, now the
machine directory only handles machines and nothing else.

Cc: Srinidhi Kasagar 
Cc: Rabin Vincent 
Cc: Jonas Aberg 
Cc: Per Forlin 
Cc: Ulf Hansson 
Signed-off-by: Linus Walleij

Revert "clocksource: Load the ACPI PM clocksource asynchronously"

2012-04-11T22:05:05+00:00

This reverts commit b519508298e0292e1771eecf14aaf67755adc39d.

The reason for this revert is that making the frequency verification
preemptible and interruptible is not working reliably. Michaels
machine failed to use PM-timer with the message:

  PM-Timer running at invalid rate: 113% of normal - aborting.

That's not a surprise as the frequency verification does rely on
interrupts being disabled. With a async scheduled thread there is no
guarantee to achieve the same result. Also some driver might fiddle
with the CTC channel 2 during the verification period, which makes the
result even more random and unpredictable.

This can be solved by using the same mechanism as we use in the
deferred TSC validation code, but that only will work if we verified a
working HPET _BEFORE_ trying to do the PM-Timer lazy validation.

So for now reverting is the safe option.

Bisected-by: Michael Witten 
Cc: Arjan van de Ven 
Cc: Arjan van de Ven 
Cc: John Stultz 
Cc: Len Brown 
LKML-Reference: 
Signed-off-by: Thomas Gleixner

Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-arm

2012-03-29T23:53:48+00:00

Pull more ARM updates from Russell King.

This got a fair number of conflicts with the  split, but
also with some other sparse-irq and header file include cleanups.  They
all looked pretty trivial, though.

* 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (59 commits)
  ARM: fix Kconfig warning for HAVE_BPF_JIT
  ARM: 7361/1: provide XIP_VIRT_ADDR for no-MMU builds
  ARM: 7349/1: integrator: convert to sparse irqs
  ARM: 7259/3: net: JIT compiler for packet filters
  ARM: 7334/1: add jump label support
  ARM: 7333/2: jump label: detect %c support for ARM
  ARM: 7338/1: add support for early console output via semihosting
  ARM: use set_current_blocked() and block_sigmask()
  ARM: exec: remove redundant set_fs(USER_DS)
  ARM: 7332/1: extract out code patch function from kprobes
  ARM: 7331/1: extract out insn generation code from ftrace
  ARM: 7330/1: ftrace: use canonical Thumb-2 wide instruction format
  ARM: 7351/1: ftrace: remove useless memory checks
  ARM: 7316/1: kexec: EOI active and mask all interrupts in kexec crash path
  ARM: Versatile Express: add NO_IOPORT
  ARM: get rid of asm/irq.h in asm/prom.h
  ARM: 7319/1: Print debug info for SIGBUS in user faults
  ARM: 7318/1: gic: refactor irq_start assignment
  ARM: 7317/1: irq: avoid NULL check in for_each_irq_desc loop
  ARM: 7315/1: perf: add support for the Cortex-A7 PMU
  ...

Merge tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2012-03-27T23:47:35+00:00

Pull "ARM: device tree work" from Arnd Bergmann:
 "Most of these patches convert code from using static platform data to
  describing the hardware in the device tree.  This is only the first
  half of the changes for v3.4 because a lot of patches for this topic
  came in the last week before the merge window.

  Signed-off-by: Arnd Bergmann "

Fix up trivial conflicts in arch/arm/mach-vexpress/{Kconfig,core.h}

* tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (86 commits)
  Document: devicetree: add OF documents for arch-mmp
  ARM: dts: append DTS file of pxa168
  ARM: mmp: append OF support on pxa168
  ARM: mmp: enable rtc clk in pxa168
  i2c: pxa: add OF support
  serial: pxa: add OF support
  arm/dts: mt_ventoux: very basic support for TeeJet Mt.Ventoux board
  ARM: OMAP2+: Remove extra ifdefs for board-generic
  ARM: OMAP2+: Fix build error when only ARCH_OMAP2/3 or 4 is selected
  ASoC: DT: Add digital microphone binding to PAZ00 board.
  ARM: dt: Add ARM PMU to tegra*.dtsi
  ARM: at91: at91sam9x5cm/dt: add leds support
  ARM: at91: usb_a9g20/dt: add gpio-keys support
  ARM: at91: at91sam9m10g45ek/dt: add gpio-keys support
  ARM: at91: at91sam9m10g45ek/dt: add leds support
  ARM: at91: usb_a9g20/dt: add leds support
  ARM: at91/pio: add new PIO3 features
  ARM: at91: add sam9_smc.o to at91sam9x5 build
  ARM: at91/tc/clocksource: Add 32 bit variant to Timer Counter
  ARM: at91/tc: add device tree support to atmel_tclib
  ...

Merge branch 'devel-stable' into for-linus

2012-03-27T10:30:31+00:00

Conflicts:
	arch/arm/Kconfig.debug
	arch/arm/plat-versatile/Kconfig
Merge fixes:
	arch/arm/mach-integrator/Kconfig
	drivers/clocksource/Kconfig

Merge tag 'pm-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

2012-03-21T17:15:51+00:00

Pull power management updates for 3.4 from Rafael Wysocki:
 "Assorted extensions and fixes including:

  * Introduction of early/late suspend/hibernation device callbacks.
  * Generic PM domains extensions and fixes.
  * devfreq updates from Axel Lin and MyungJoo Ham.
  * Device PM QoS updates.
  * Fixes of concurrency problems with wakeup sources.
  * System suspend and hibernation fixes."

* tag 'pm-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (43 commits)
  PM / Domains: Check domain status during hibernation restore of devices
  PM / devfreq: add relation of recommended frequency.
  PM / shmobile: Make MTU2 driver use pm_genpd_dev_always_on()
  PM / shmobile: Make CMT driver use pm_genpd_dev_always_on()
  PM / shmobile: Make TMU driver use pm_genpd_dev_always_on()
  PM / Domains: Introduce "always on" device flag
  PM / Domains: Fix hibernation restore of devices, v2
  PM / Domains: Fix handling of wakeup devices during system resume
  sh_mmcif / PM: Use PM QoS latency constraint
  tmio_mmc / PM: Use PM QoS latency constraint
  PM / QoS: Make it possible to expose PM QoS latency constraints
  PM / Sleep: JBD and JBD2 missing set_freezable()
  PM / Domains: Fix include for PM_GENERIC_DOMAINS=n case
  PM / Freezer: Remove references to TIF_FREEZE in comments
  PM / Sleep: Add more wakeup source initialization routines
  PM / Hibernate: Enable usermodehelpers in hibernate() error path
  PM / Sleep: Make __pm_stay_awake() delete wakeup source timers
  PM / Sleep: Fix race conditions related to wakeup source timer function
  PM / Sleep: Fix possible infinite loop during wakeup source destruction
  PM / Hibernate: print physical addresses consistently with other parts of kernel
  ...

PM / shmobile: Make MTU2 driver use pm_genpd_dev_always_on()

2012-03-16T20:45:26+00:00

Make the MTU2 clocksource driver mark its device as "always on"
using pm_genpd_dev_always_on() to protect it from surprise power
removals.

Signed-off-by: Rafael J. Wysocki 
Tested-by: Simon Horman 
Acked-by: Paul Mundt 
Cc: stable@vger.kernel.org

PM / shmobile: Make CMT driver use pm_genpd_dev_always_on()

2012-03-16T20:45:13+00:00

Make the CMT clocksource driver mark its device as "always on"
using pm_genpd_dev_always_on() to protect it from surprise power
removals.

Signed-off-by: Rafael J. Wysocki 
Tested-by: Simon Horman 
Acked-by: Paul Mundt 
Cc: stable@vger.kernel.org