Pull more clk updates from Stephen Boyd:
 "Another set of clk driver updates and fixes for the merge window. The
  driver updates needed more time to bake in linux-next.

  Updates:
   - Support for more clk controllers in Qualcomm SoCs such as SM8350,
     SM8450, SDX75, SC8280XP, and IPQ9574
   - Runtime PM enablement of some more Qualcomm clk controllers
   - Various fixes to Qualcomm clk driver data to use correct clk_ops
     and to check halt bits properly
   - AT91 updates to modernize with clk_parent_data structures

  Fixes:
   - Remove 'syscon' from dt binding fix for ti,j721e-system-controller
   - Fix determine rate in the Tegra driver that got wrecked by the
     refactorting of muxes this merge window"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (69 commits)
  clk: tegra: Avoid calling an uninitialized function
  dt-bindings: mfd: ti,j721e-system-controller: Remove syscon from example
  clk: at91: sama7g5: s/ep_chg_chg_id/ep_chg_id
  clk: at91: sama7g5: switch to parent_hw and parent_data
  clk: at91: sckc: switch to parent_data/parent_hw
  clk: at91: clk-sam9x60-pll: add support for parent_hw
  clk: at91: clk-utmi: add support for parent_hw
  clk: at91: clk-system: add support for parent_hw
  clk: at91: clk-programmable: add support for parent_hw
  clk: at91: clk-peripheral: add support for parent_hw
  clk: at91: clk-master: add support for parent_hw
  clk: at91: clk-generated: add support for parent_hw
  clk: at91: clk-main: add support for parent_data/parent_hw
  clk: qcom: gcc-sc8280xp: Add runtime PM
  clk: qcom: gpucc-sc8280xp: Add runtime PM
  clk: qcom: mmcc-msm8974: fix MDSS_GDSC power flags
  clk: qcom: gpucc-sm6375: Enable runtime pm
  dt-bindings: clock: sm6375-gpucc: Add VDD_GX
  clk: qcom: gcc-sm6115: Add missing PLL config properties
  clk: qcom: clk-alpha-pll: Add a way to update some bits of test_ctl(_hi)
  ...

Commit 493ffb046cf5 ("clk: tegra: super: Switch to determine_rate")
replaced clk_super_round_rate() by clk_super_determine_rate(), but
didn't update one callsite that was explicitly calling the old
tegra_clk_super_ops.round_rate() function, which was now NULL. This
resulted in a crash on Tegra30 systems during early boot.

Switch this callsite over to the clk_super_determine_rate() equivalent
to avoid the crash.

Fixes: 493ffb046cf5 ("clk: tegra: super: Switch to determine_rate")
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20230630130748.840729-1-thierry.reding@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

Pull Char/Misc updates from Greg KH:
 "Here is the big set of char/misc and other driver subsystem updates
  for 6.5-rc1.

  Lots of different, tiny, stuff in here, from a range of smaller driver
  subsystems, including pulls from some substems directly:

   - IIO driver updates and additions

   - W1 driver updates and fixes (and a new maintainer!)

   - FPGA driver updates and fixes

   - Counter driver updates

   - Extcon driver updates

   - Interconnect driver updates

   - Coresight driver updates

   - mfd tree tag merge needed for other updates on top of that, lots of
     small driver updates as patches, including:

   - static const updates for class structures

   - nvmem driver updates

   - pcmcia driver fix

   - lots of other small driver updates and fixes

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'char-misc-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (243 commits)
  bsr: fix build problem with bsr_class static cleanup
  comedi: make all 'class' structures const
  char: xillybus: make xillybus_class a static const structure
  xilinx_hwicap: make icap_class a static const structure
  virtio_console: make port class a static const structure
  ppdev: make ppdev_class a static const structure
  char: misc: make misc_class a static const structure
  /dev/mem: make mem_class a static const structure
  char: lp: make lp_class a static const structure
  dsp56k: make dsp56k_class a static const structure
  bsr: make bsr_class a static const structure
  oradax: make 'cl' a static const structure
  hwtracing: hisi_ptt: Fix potential sleep in atomic context
  hwtracing: hisi_ptt: Advertise PERF_PMU_CAP_NO_EXCLUDE for PTT PMU
  hwtracing: hisi_ptt: Export available filters through sysfs
  hwtracing: hisi_ptt: Add support for dynamically updating the filter list
  hwtracing: hisi_ptt: Factor out filter allocation and release operation
  samples: pfsm: add CC_CAN_LINK dependency
  misc: fastrpc: check return value of devm_kasprintf()
  coresight: dummy: Update type of mode parameter in dummy_{sink,source}_enable()
  ...

Pull ARM SoC updates from Arnd Bergmann:
 "These are mostly minor cleanups and bugfixes that address harmless
  problems.

  The largest branch is a conversion of the omap platform to use GPIO
  descriptors throughout the tree, for any devices that are not fully
  converted to devicetree.

  The Samsung Exynos platform gains back support for the Exynos4212 chip
  that was previously unused and removed but is now used for the Samsung
  Galaxy Tab3"

* tag 'soc-arm-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (24 commits)
  ARM: omap2: Fix copy/paste bug
  MAINTAINERS: Replace my email address
  Input: ads7846 - fix pointer cast warning
  Input: ads7846 - Fix usage of match data
  ARM: omap2: Fix checkpatch issues
  arm: omap1: replace printk() with pr_err macro
  ARM: omap: Fix checkpatch issues
  ARM: s3c: Switch i2c drivers back to use .probe()
  ARM: versatile: mark mmc_status() static
  ARM: spear: include "pl080.h" for pl080_get_signal() prototype
  ARM: sa1100: address missing prototype warnings
  ARM: pxa: fix missing-prototypes warnings
  ARM: orion5x: fix d2net gpio initialization
  ARM: omap2: fix missing tick_broadcast() prototype
  ARM: omap1: add missing include
  ARM: lpc32xx: add missing include
  ARM: imx: add missing include
  ARM: highbank: add missing include
  ARM: ep93xx: fix missing-prototype warnings
  ARM: davinci: fix davinci_cpufreq_init() declaration
  ...

Pull new ARM SoC support from Arnd Bergmann:
 "There are two new SoC families this time, and both appear fairly
  similar: The Nuvoton MA35D1 and the STMicroelectronics STM32MP2 are
  both dual-core Cortex-A35 based chips for the low-power industrial
  embedded market, and they mark the first 64-bit product in a widely
  used family of 32-bit Arm MCUs and SoCs.

  The way into the kernel is completely different here: The team at ST
  has a long history of working upstream with their STM32MP1 and other
  SoCs, and they produced a complete port to arm64 together with the
  initial announcement. Nuvoton also has multiple SoC product lines with
  current or previous upstream support, but those are maintained by
  third parties and are unrelated. The patch series from Nuvoton's Jacky
  Huang had to go through many revisisions to get to this point and is
  still missing a few drivers including the serial port for the moment.

  The branch contains the devicetree files as well as all the code
  changes, in order to have something that can be tested standalone"

* tag 'soc-newsoc-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (25 commits)
  clk: nuvoton: Use clk_parent_data instead of string for parent clock
  clk: nuvoton: Update all constant hex values to lowercase
  clk: nuvoton: Add clk-ma35d1.h for driver extern functions
  remoteproc: stm32: use correct format strings on 64-bit
  MAINTAINERS: add entry for ARM/STM32 ARCHITECTURE
  arm64: defconfig: enable ARCH_STM32 and STM32 serial driver
  arm64: dts: st: add stm32mp257f-ev1 board support
  dt-bindings: stm32: document stm32mp257f-ev1 board
  arm64: dts: st: introduce stm32mp25 pinctrl files
  arm64: dts: st: introduce stm32mp25 SoCs family
  arm64: introduce STM32 family on Armv8 architecture
  dt-bindings: stm32: add st,stm32mp25-syscfg compatible for syscon
  pinctrl: stm32: add stm32mp257 pinctrl support
  dt-bindings: pinctrl: stm32: support for stm32mp257 and additional packages
  Documentation/process: add soc maintainer handbook
  reset: RESET_NUVOTON_MA35D1 should depend on ARCH_MA35
  reset: Add Nuvoton ma35d1 reset driver support
  clk: nuvoton: Add clock driver for ma35d1 clock controller
  arm64: dts: nuvoton: Add initial ma35d1 device tree
  dt-bindings: serial: Document ma35d1 uart controller
  ...

Pull MIPS updates from Thomas Bogendoerfer:

 - add support for TP-Link HC220 G5 v1

 - add support for Wifi/Bluetooth on CI20

 - rework Ralink clock and reset handling

 - cleanups and fixes

* tag 'mips_6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (58 commits)
  MIPS: Loongson64: DTS: Add RTC support to Loongson-2K1000
  MIPS: Loongson64: DTS: Add RTC support to LS7A PCH
  MIPS: OCTEON: octeon-usb: cleanup divider calculation
  MIPS: OCTEON: octeon-usb: introduce dwc3_octeon_{read,write}q
  MIPS: OCTEON: octeon-usb: move gpio config to separate function
  MIPS: OCTEON: octeon-usb: use bitfields for shim register
  MIPS: OCTEON: octeon-usb: use bitfields for host config register
  MIPS: OCTEON: octeon-usb: use bitfields for control register
  MIPS: OCTEON: octeon-usb: add all register offsets
  mips: ralink: match all supported system controller compatible strings
  MIPS: dec: prom: Address -Warray-bounds warning
  MIPS: DTS: CI20: Raise VDDCORE voltage to 1.125 volts
  clk: ralink: mtmips: Fix uninitialized use of ret in mtmips_register_{fixed,factor}_clocks()
  mips: ralink: introduce commonly used remap node function
  mips: pci-mt7620: use dev_info() to log PCIe device detection result
  mips: pci-mt7620: do not print NFTS register value as error log
  MAINTAINERS: add Mediatek MTMIPS Clock maintainer
  mips: ralink: get cpu rate from new driver code
  mips: ralink: remove reset related code
  mips: ralink: mt7620: remove clock related code
  ...

Pull clk updates from Stephen Boyd:
 "This batch of clk driver updates contains almost no new SoC support.
  Instead there's a treewide patch series from Maxime that makes
  clk_ops::determine_rate mandatory for muxes.

  Beyond that core framework change we have the usual pile of clk driver
  updates such as migrating i2c drivers to use .probe() again or
  YAMLfication of clk DT bindings so we can validate DTBs.

  Overall the SoCs that got the most updates this time around in terms
  of diffstat are the Amlogic and Mediatek drivers because they added
  new SoC support or fixed up various drivers to have proper data.

  In general things look kinda quiet. I suspect the core framework
  change may still shake out some problems after the merge window,
  mostly because not everyone tests linux-next where that series has
  been for some number of weeks. I saw that there's at least one pending
  fix for Tegra that needs to be wrapped up into a proper patch. I'll
  try to catch those bits before the window closes so that -rc1 is
  bootable. More details below.

  Core:
   - Make clk_ops::determine_rate mandatory for muxes

  New Drivers:
   - Add amlogic a1 SoC family PLL and peripheral clock controller support

  Updates:
   - Handle allocation failures from kasprintf() and friends
   - Migrate platform clk drivers to .remove_new()
   - Migrate i2c clk drivers to .probe() instead of .probe_new()
   - Remove CLK_SET_PARENT from all Mediatek MSDC core clocks
   - Add infra_ao reset support for Mediatek MT8188 SoCs
   - Align driver_data to i2c_device_id tables in some i2c clk drivers
   - Use device_get_match_data() in vc5 clk driver
   - New Kconfig symbol name (SOC_MICROCHIP_POLARFIRE) for Microchip
     FPGA clock drivers
   - Use of_property_read_bool() to read "microchip,pic32mzda-sosc"
     boolean DT property in clk-pic32mzda
   - Convert AT91 clock dt-bindings to YAML
   - Remove CLK_SET_RATE_PARENT flag from LDB clocks on i.MX6SX
   - Keep i.MX UART clocks enabled during kernel boot if earlycon is set
   - Drop imx_unregister_clocks() as there are no users anymore
   - Switch to _safe iterator on imx_clk_scu_unregister() to avoid use
     after free
   - Add determine_rate op to the imx8m composite clock
   - Use device managed API for iomap and kzalloc for i.MXRT1050,
     i.MX8MN, i.MX8MP and i.MX93 clock controller drivers
   - Add missing interrupt DT property for the i.MX8M clock controller
   - Re-add support for Exynos4212 clock controller because we are
     re-introducing the SoC in the mainline
   - Add CONFIG_OF dependency to Samsung clk Kconfig symbols to solve
     some objtool warnings
   - Preselect PLL MIPI as TCON0 parent for Allwinner A64 SoC
   - Convert the Renesas clock drivers to readl_poll_timeout_atomic()
   - Add PWM clock on Renesas R-Car V3U
   - Fix PLL5 on Renesas RZ/G2L and RZ/V2L"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (149 commits)
  clk: fix typo in clk_hw_register_fixed_rate_parent_data() macro
  clk: Fix memory leak in devm_clk_notifier_register()
  clk: mvebu: Iterate over possible CPUs instead of DT CPU nodes
  clk: mvebu: Use of_get_cpu_hwid() to read CPU ID
  MAINTAINERS: Add Marvell mvebu clock drivers
  clk: clocking-wizard: check return value of devm_kasprintf()
  clk: ti: clkctrl: check return value of kasprintf()
  clk: keystone: sci-clk: check return value of kasprintf()
  clk: si5341: free unused memory on probe failure
  clk: si5341: check return value of {devm_}kasprintf()
  clk: si5341: return error if one synth clock registration fails
  clk: cdce925: check return value of kasprintf()
  clk: vc5: check memory returned by kasprintf()
  clk: mediatek: clk-mt8173-apmixedsys: Fix iomap not released issue
  clk: mediatek: clk-mt8173-apmixedsys: Fix return value for of_iomap() error
  clk: mediatek: clk-mtk: Grab iomem pointer for divider clocks
  clk: keystone: syscon-clk: Add support for audio refclk
  dt-bindings: clock: Add binding documentation for TI Audio REFCLK
  dt-bindings: clock: ehrpwm: Remove unneeded syscon compatible
  clk: keystone: syscon-clk: Allow the clock node to not be of type syscon
  ...

Pull regulator updates from Mark Brown:
 "This release is almost all drivers, there's some small improvements in
  the core but otherwise everything is updates to drivers, mostly the
  addition of new ones.

  There's also a bunch of changes pulled in from the MFD subsystem as
  dependencies, Rockchip and TI core MFD code that the regulator drivers
  depend on.

  I've also yet again managed to put a SPI commit in the regulator tree,
  I don't know what it is about those two trees (this for
  spi-geni-qcom).

  Summary:

   - Support for Renesas RAA215300, Rockchip RK808, Texas Instruments
     TPS6594 and TPS6287x, and X-Powers AXP15060 and AXP313a"

* tag 'regulator-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (43 commits)
  regulator: Add Renesas PMIC RAA215300 driver
  regulator: dt-bindings: Add Renesas RAA215300 PMIC bindings
  regulator: ltc3676: Use maple tree register cache
  regulator: ltc3589: Use maple tree register cache
  regulator: helper: Document ramp_delay parameter of regulator_set_ramp_delay_regmap()
  regulator: mt6358: Use linear voltage helpers for single range regulators
  regulator: mt6358: Const-ify mt6358_regulator_info data structures
  regulator: mt6358: Drop *_SSHUB regulators
  regulator: mt6358: Merge VCN33_* regulators
  regulator: dt-bindings: mt6358: Drop *_sshub regulators
  regulator: dt-bindings: mt6358: Merge ldo_vcn33_* regulators
  regulator: dt-bindings: pwm-regulator: Add missing type for "pwm-dutycycle-unit"
  regulator: Switch two more i2c drivers back to use .probe()
  spi: spi-geni-qcom: Do not do DMA map/unmap inside driver, use framework instead
  soc: qcom: geni-se: Add interfaces geni_se_tx_init_dma() and geni_se_rx_init_dma()
  regulator: tps6594-regulator: Add driver for TI TPS6594 regulators
  regulator: axp20x: Add AXP15060 support
  regulator: axp20x: Add support for AXP313a variant
  dt-bindings: pfuze100.yaml: Add an entry for interrupts
  regulator: stm32-pwr: Fix regulator disabling
  ...

* clk-qcom: (63 commits)
  clk: qcom: gcc-sc8280xp: Add runtime PM
  clk: qcom: gpucc-sc8280xp: Add runtime PM
  clk: qcom: mmcc-msm8974: fix MDSS_GDSC power flags
  clk: qcom: gpucc-sm6375: Enable runtime pm
  dt-bindings: clock: sm6375-gpucc: Add VDD_GX
  clk: qcom: gcc-sm6115: Add missing PLL config properties
  clk: qcom: clk-alpha-pll: Add a way to update some bits of test_ctl(_hi)
  clk: qcom: gcc-ipq6018: remove duplicate initializers
  clk: qcom: gcc-ipq9574: Enable crypto clocks
  dt-bindings: clock: Add crypto clock and reset definitions
  clk: qcom: Add lpass audio clock controller driver for SC8280XP
  clk: qcom: Add lpass clock controller driver for SC8280XP
  dt-bindings: clock: Add LPASS AUDIOCC and reset controller for SC8280XP
  dt-bindings: clock: Add LPASSCC and reset controller for SC8280XP
  dt-bindings: clock: qcom,mmcc: define clocks/clock-names for MSM8226
  clk: qcom: gpucc-sm8550: Add support for graphics clock controller
  clk: qcom: Add support for SM8450 GPUCC
  clk: qcom: gcc-sm8450: Enable hw_clk_ctrl
  clk: qcom: rcg2: Make hw_clk_ctrl toggleable
  dt-bindings: clock: qcom: Add SM8550 graphics clock controller
  ...

* clk-microchip:
  clk: at91: sama7g5: s/ep_chg_chg_id/ep_chg_id
  clk: at91: sama7g5: switch to parent_hw and parent_data
  clk: at91: sckc: switch to parent_data/parent_hw
  clk: at91: clk-sam9x60-pll: add support for parent_hw
  clk: at91: clk-utmi: add support for parent_hw
  clk: at91: clk-system: add support for parent_hw
  clk: at91: clk-programmable: add support for parent_hw
  clk: at91: clk-peripheral: add support for parent_hw
  clk: at91: clk-master: add support for parent_hw
  clk: at91: clk-generated: add support for parent_hw
  clk: at91: clk-main: add support for parent_data/parent_hw

Pull timer updates from Thomas Gleixner:
 "Time, timekeeping and related device driver updates:

  Core:

   - A set of fixes, cleanups and enhancements to the posix timer code:

       - Prevent another possible live lock scenario in the exit() path,
         which affects POSIX_CPU_TIMERS_TASK_WORK enabled architectures.

       - Fix a loop termination issue which was reported syzcaller/KSAN
         in the posix timer ID allocation code.

         That triggered a deeper look into the posix-timer code which
         unearthed more small issues.

       - Add missing READ/WRITE_ONCE() annotations

       - Fix or remove completely outdated comments

       - Document places which are subtle and completely undocumented.

   - Add missing hrtimer modes to the trace event decoder

   - Small cleanups and enhancements all over the place

  Drivers:

   - Rework the Hyper-V clocksource and sched clock setup code

   - Remove a deprecated clocksource driver

   - Small fixes and enhancements all over the place"

* tag 'timers-core-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip: (39 commits)
  clocksource/drivers/cadence-ttc: Fix memory leak in ttc_timer_probe
  dt-bindings: timers: Add Ralink SoCs timer
  clocksource/drivers/hyper-v: Rework clocksource and sched clock setup
  dt-bindings: timer: brcm,kona-timer: convert to YAML
  clocksource/drivers/imx-gpt: Fold <soc/imx/timer.h> into its only user
  clk: imx: Drop inclusion of unused header <soc/imx/timer.h>
  hrtimer: Add missing sparse annotations to hrtimer locking
  clocksource/drivers/imx-gpt: Use only a single name for functions
  clocksource/drivers/loongson1: Move PWM timer to clocksource framework
  dt-bindings: timer: Add Loongson-1 clocksource
  MIPS: Loongson32: Remove deprecated PWM timer clocksource
  clocksource/drivers/ingenic-timer: Use pm_sleep_ptr() macro
  tracing/timer: Add missing hrtimer modes to decode_hrtimer_mode().
  posix-timers: Add sys_ni_posix_timers() prototype
  tick/rcu: Fix bogus ratelimit condition
  alarmtimer: Remove unnecessary (void *) cast
  alarmtimer: Remove unnecessary initialization of variable 'ret'
  posix-timers: Refer properly to CONFIG_HIGH_RES_TIMERS
  posix-timers: Polish coding style in a few places
  posix-timers: Remove pointless comments
  ...