Pull devicetree fixes from Rob Herring:

 - Two fixes due to DT node name changes on Arm, Ltd. boards

 - Treewide rename of Ingenic CGU headers

 - Update ST email addresses

 - Remove Netlogic DT bindings

 - Dropping few more cases of redundant 'maxItems' in schemas

 - Convert toshiba,tc358767 bridge binding to schema

* tag 'devicetree-fixes-for-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: watchdog: sunxi: fix error in schema
  bindings: media: venus: Drop redundant maxItems for power-domain-names
  dt-bindings: Remove Netlogic bindings
  clk: versatile: clk-icst: Ensure clock names are unique
  of: Support using 'mask' in making device bus id
  dt-bindings: treewide: Update @st.com email address to @foss.st.com
  dt-bindings: media: Update maintainers for st,stm32-hwspinlock.yaml
  dt-bindings: media: Update maintainers for st,stm32-cec.yaml
  dt-bindings: mfd: timers: Update maintainers for st,stm32-timers
  dt-bindings: timer: Update maintainers for st,stm32-timer
  dt-bindings: i2c: imx: hardware do not restrict clock-frequency to only 100 and 400 kHz
  dt-bindings: display: bridge: Convert toshiba,tc358767.txt to yaml
  dt-bindings: Rename Ingenic CGU headers to ingenic,*.h

Pull more clk updates from Stephen Boyd:
 "This is the second batch of clk driver updates that needed a little
  more time to soak in linux-next.

   - Use modern i2c probe in vc5

   - Cleanup some includes

   - Update links to datasheets

   - Add UniPhier NX1 SoC clk support

   - Fix DT bindings for SiFive FU740

   - Revert the module platform driver support for Rockchip because it
     wasn't actually tested

   - Fix the composite clk code again as the previous fix had a one line
     bug that broke rate changes for clks that want to use the same
     parent still

   - Use the right table for a divider in ast2600 driver

   - Get rid of gcc_aggre1_pnoc_ahb_clk in qcom clk driver again because
     its critical but unused"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: qcom: gcc-msm8996: Drop (again) gcc_aggre1_pnoc_ahb_clk
  clk: imx8m: Do not set IMX_COMPOSITE_CORE for non-regular composites
  clk/ast2600: Fix soc revision for AHB
  clk: composite: Fix 'switching' to same clock
  clk: rockchip: drop module parts from rk3399 and rk3568 drivers
  Revert "clk: rockchip: use module_platform_driver_probe"
  clk:mediatek: remove duplicate include in clk-mt8195-imp_iic_wrap.c
  dt-bindings: clock: fu740-prci: add reset-cells
  clk: uniphier: Add SoC-glue clock source selector support for Pro4
  dt-bindings: clock: uniphier: Add clock binding for SoC-glue
  clk: uniphier: Add NX1 clock support
  dt-bindings: clock: uniphier: Add NX1 clock binding
  clk: uniphier: Add audio system and video input clock control for PXs3
  clk: si5351: Update datasheet references
  clk: vc5: Use i2c .probe_new
  clk/actions/owl-factor.c: remove superfluous headers
  clk: ingenic: Fix bugs with divided dividers

Commit 2d3de197a818 ("ARM: dts: arm: Update ICST clock nodes 'reg' and
node names") moved to using generic node names. That results in trying
to register multiple clocks with the same name. Fix this by including
the unit-address in the clock name.

Fixes: 2d3de197a818 ("ARM: dts: arm: Update ICST clock nodes 'reg' and node names")
Cc: stable@vger.kernel.org
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-clk@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20211109164650.2233507-3-robh@kernel.org

Tidy up a bit the tree, by prefixing all include/dt-bindings/clock/ files
related to Ingenic SoCs with 'ingenic,'.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211016133322.40771-1-paul@crapouillou.net

Pull MFD updates from Lee Jones:
 "Removed Drivers:
   - Remove support for TI TPS80031/TPS80032 PMICs

  New Device Support:
   - Add support for Magnetic Reader to TI AM335x
   - Add support for DA9063_EA to Dialog DA9063
   - Add support for SC2730 PMIC to Spreadtrum SC27xx
   - Add support for MacBookPro16,2 ICL-N UART Intel LPSS PCI
   - Add support for lots of new PMICS in QCom SPMI PMIC
   - Add support for ADC to Diolan DLN2

  New Functionality:
   - Add support for Power Off to Rockchip RK817

  Fix-ups:
   - Simplify Regmap passing to child devices in hi6421-spmi-pmic
   - SPDX licensing updates in ti_am335x_tscadc
   - Improve error handling in ti_am335x_tscadc
   - Expedite clock search in ti_am335x_tscadc
   - Generic simplifications in ti_am335x_tscadc
   - Use generic macros/defines in ti_am335x_tscadc
   - Remove unused code in ti_am335x_tscadc, cros_ec_dev
   - Convert to GPIOD in wcd934x
   - Add namespacing in ti_am335x_tscadc
   - Restrict compilation to relevant arches in intel_pmt
   - Provide better description/documentation in exynos_lpass
   - Add SPI device ID table in altera-a10sr, motorola-cpcap,
     sprd-sc27xx-spi
   - Change IRQ handling in qcom-pm8xxx
   - Split out I2C and SPI code in arizona
   - Explicitly include used headers in altera-a10sr
   - Convert sysfs show() function to in sysfs_emit
   - Standardise *_exit() and *_remove() return values in mc13xxx,
     stmpe, tps65912
   - Trivial (style/spelling/whitespace) fixups in ti_am335x_tscadc,
     qcom-spmi-pmic, max77686-private
   - Device Tree fix-ups in ti,am3359-tscadc, samsung,s2mps11,
     samsung,s2mpa01, samsung,s5m8767, brcm,misc, brcm,cru, syscon,
     qcom,tcsr, xylon,logicvc, max77686, x-powers,ac100,
     x-powers,axp152, x-powers,axp209-gpio, syscon, qcom,spmi-pmic

  Bug Fixes:
   - Balance refcounting (get/put) in ti_am335x_tscadc, mfd-core
   - Fix IRQ trigger type in sec-irq, max77693, max14577
   - Repair off-by-one in altera-sysmgr
   - Add explicit 'select MFD_CORE' to MFD_SIMPLE_MFD_I2C"

* tag 'mfd-next-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (95 commits)
  mfd: simple-mfd-i2c: Select MFD_CORE to fix build error
  mfd: tps80031: Remove driver
  mfd: max77686: Correct tab-based alignment of register addresses
  mfd: wcd934x: Replace legacy gpio interface for gpiod
  dt-bindings: mfd: qcom: pm8xxx: Add pm8018 compatible
  mfd: dln2: Add cell for initializing DLN2 ADC
  mfd: qcom-spmi-pmic: Add missing PMICs supported by socinfo
  mfd: qcom-spmi-pmic: Document ten more PMICs in the binding
  mfd: qcom-spmi-pmic: Sort compatibles in the driver
  mfd: qcom-spmi-pmic: Sort the compatibles in the binding
  mfd: janz-cmoio: Replace snprintf in show functions with sysfs_emit
  mfd: altera-a10sr: Include linux/module.h
  mfd: tps65912: Make tps65912_device_exit() return void
  mfd: stmpe: Make stmpe_remove() return void
  mfd: mc13xxx: Make mc13xxx_common_exit() return void
  dt-bindings: mfd: syscon: Add samsung,exynosautov9-sysreg compatible
  mfd: altera-sysmgr: Fix a mistake caused by resource_size conversion
  dt-bindings: gpio: Convert X-Powers AXP209 GPIO binding to a schema
  dt-bindings: mfd: syscon: Add rk3368 QoS register compatible
  mfd: arizona: Split of_match table into I2C and SPI versions
  ...

The gcc_aggre1_pnoc_ahb_clk is crucial for the proper MSM8996/APQ8096
functioning. If it gets disabled, several subsytems will stop working
(including eMMC/SDCC and USB). There are no in-kernel users of this
clock, so it is much simpler to remove from the kernel.

The clock was first removed in the commit 9e60de1cf270 ("clk: qcom:
Remove gcc_aggre1_pnoc_ahb_clk from msm8996") by Stephen Boyd, but got
added back in the commit b567752144e3 ("clk: qcom: Add some missing gcc
clks for msm8996") by Rajendra Nayak.

Let's remove it again in hope that nobody adds it back.

Reported-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Cc: Rajendra Nayak <rnayak@codeaurora.org>
Cc: Konrad Dybcio <konrad.dybcio@somainline.org>
Fixes: b567752144e3 ("clk: qcom: Add some missing gcc clks for msm8996")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20211104011155.2209654-1-dmitry.baryshkov@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

Only imx8m_clk_hw_composite_core needs to set this flag.

Fixes: a60fe746df94 ("clk: imx: Rework all imx_clk_hw_composite wrappers")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20211103123947.3222443-1-alexander.stein@ew.tq-group.com
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Tested-by: Adam Ford <aford173@gmail.com> #imx8mm-beacon
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

Pull clk updates from Stephen Boyd:
 "The usual collection of clk driver updates and new driver additions.
  In terms of lines it's mainly Qualcomm and Mediatek code, supporting
  various SoCs and their multitude of clk controllers.

  New Drivers:
   - GCC and RPMcc support for Qualcomm QCM2290 SoCs
   - GCC support for Qualcomm MSM8994/MSM8992 SoCs
   - LPASSCC and CAMCC support for Qualcomm SC7280 SoCs
   - Support for Mediatek MT8195 SoCs
   - Initial clock driver for the Exynos850 SoC
   - Add i.MX8ULP clock driver and related bindings

  Updates:
   - Clock power management for new SAMA7G5 SoC
   - Updates to the master clock driver and sam9x60-pll to be able to
     use cpufreq-dt driver and avoid overclocking of CPU and MCK0
     domains while changing the frequency via DVFS
   - Use ARRAY_SIZE in qcom clk drivers
   - Remove some impractical fallback parent names in qcom clk drivers
   - Make Mediatek clk drivers tristate
   - Refactoring of the CPU clock code and conversion of Samsung
     Exynos5433 CPU clock driver to the platform driver
   - A few conversions to devm_platform_ioremap_resource()
   - Updates of the Samsung Kconfig help text
   - Update video path realted clocks for Amlogic meson8
   - Add SPI Multi I/O Bus and SDHI clocks and resets on Renesas RZ/G2L
   - Add SPI Multi I/O Bus (RPC) clocks on Renesas R-Car V3U
   - Add MediaLB clocks on Renesas R-Car H3, M3-W/W+, and M3-N
   - Remove unused helpers from i.MX specific clock header
   - Rework all i.MX clk based helpers to use clk_hw based ones
   - Rework i.MX gate/mux/divider wrappers
   - Rework imx_clk_hw_composite and imx_clk_hw_pll14xx wrappers
   - Update i.MX pllv4 and composite clocks to support i.MX8ULP
   - Disable i.MX7ULP composite clock during initialization
   - Add CLK_SET_RATE_NO_REPARENT flag to the i.MX7ULP composite
   - Disable the i.MX pfd when set pfdv2 clock rate
   - Add support for i.MX8ULP in pfdv2
   - Add the pcc reset controller support on i.MX8ULP
   - Fix the build break when clk-imx8ulp is built as module
   - Move csi_sel mux to correct base register in i.MX6UL clock drivr
   - Fix csi clk gate register in i.MX6UL clock driver
   - Fix build bug making CLK_IMX8ULP select MXC_CLK
   - Add TPU (PWM), and Z (Cortex-A76) clocks on Renesas R-Car V3U
   - Add Ethernet clocks on Renesas RZ/G2L
   - Move Rockchip to use module_platform_probe
   - Enable usage of Coresight related clocks on Rockchip rk3399"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (170 commits)
  clk: use clk_core_get_rate_recalc() in clk_rate_get()
  clk: at91: sama7g5: set low limit for mck0 at 32KHz
  clk: at91: sama7g5: remove prescaler part of master clock
  clk: at91: clk-master: add notifier for divider
  clk: at91: clk-sam9x60-pll: add notifier for div part of PLL
  clk: at91: clk-master: fix prescaler logic
  clk: at91: clk-master: mask mckr against layout->mask
  clk: at91: clk-master: check if div or pres is zero
  clk: at91: sam9x60-pll: use DIV_ROUND_CLOSEST_ULL
  clk: at91: pmc: add sama7g5 to the list of available pmcs
  clk: at91: clk-master: improve readability by using local variables
  clk: at91: clk-master: add register definition for sama7g5's master clock
  clk: at91: sama7g5: add securam's peripheral clock
  clk: at91: pmc: execute suspend/resume only for backup mode
  clk: at91: re-factor clocks suspend/resume
  clk: ux500: Add driver for the reset portions of PRCC
  dt-bindings: clock: u8500: Rewrite in YAML and extend
  clk: composite: Use rate_ops.determine_rate when also a mux is available
  clk: samsung: describe drivers in Kconfig
  clk: samsung: exynos5433: update apollo and atlas clock probing
  ...

Move the soc revision parsing to the initial probe, saving the driver
from parsing the register multiple times.

Use this variable to select the correct divisor table for the AHB clock.
Before this fix the A2 would have used the A0 table.

Fixes: 2d491066ccd4 ("clk: ast2600: Fix AHB clock divider for A1")
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210922235449.213631-1-joel@jms.id.au
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

During commit 6594988fd625 ("clk: composite: Use rate_ops.determine_rate
when also a mux is available") setting req->best_parent_hw got lost,
so best_parent_hw stays NULL during switch to the same parent. This
results in the (debug) message:
  clk_calc_new_rates: lcdif_pixel not gated but wants to reparent
and the following rate change is dropped.

Fixes: 6594988fd625 ("clk: composite: Use rate_ops.determine_rate when also a mux is available")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20211103122441.3208576-1-alexander.stein@ew.tq-group.com
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>