linux.git/drivers/clk, branch v5.1-rc2

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

2019-03-14T15:46:17+00:00

Pull clk subsystem updates from Stephen Boyd:
 "We have a fairly balanced mix of clk driver updates and clk framework
  updates this time around. It's the usual pile of new drivers for new
  hardware out there and the normal small fixes and updates, but then we
  have some core framework changes too.

  In the core framework, we introduce support for a clk_get_optional()
  API to get clks that may not always be populated and a way to devm
  manage clkdev lookups registered by provider drivers. We also do some
  refactoring to simplify the interface between clkdev and the common
  clk framework so we can reuse the DT parsing and clk_get() path in
  provider drivers in the future. This work will continue in the next
  few cycles while we convert how providers specify clk parents.

  On the driver side, the biggest part of the dirstat is the Amlogic clk
  driver that got support for the G12A SoC. It dominates with almost
  half the overall diff, while the second largest part of the diff is in
  the i.MX clk driver that gained support for imx8mm SoCs. After that,
  we have the Actions Semiconductor and Qualcomm drivers rounding out
  the big part of the dirstat because they both got new hardware support
  for SoCs. The rest is just various updates and non-critical fixes for
  existing drivers.

  Core:
   - Convert a few clk bindings to JSON schema format
   - Add a {devm_}clk_get_optional() API
   - Add devm_clk_hw_register_clkdev() API to manage clkdev lookups
   - Start rewriting clk parent registration and supporting device links
     by moving around code that supports clk_get() and DT parsing of the
     'clocks' property

  New Drivers:
   - Add Qualcomm MSM8998 RPM managed clks
   - IPA clk support on Qualcomm RPMh clk controllers
   - Actions Semi S500 SoC clk support
   - Support for fixed rate clks populated from an MMIO register
   - Add RPC (QSPI/HyperFLASH) clocks on Renesas R-Car V3H
   - Add TMU (timer) clocks on Renesas RZ/G2E
   - Add Amlogic G12A Always-On Clock Controller
   - Add 32k clock generation for Amlogic AXG
   - Add support for the Mali GPU clocks on Amlogic Meson8
   - Add Amlogic G12A EE clock controller driver
   - Add missing CANFD clocks on Renesas RZ/G2M and RZ/G2E
   - Add i.MX8MM SoC clk driver support

  Removed Drivers:
   - Remove clps711x driver as the board support is gone

  Updates:
   - 3rd ECO fix for Mediatek MT2712 SoCs
   - Updates for Qualcomm MSM8998 GCC clks
   - Random static analysis fixes for clk drivers
   - Support for sleeping gpios in the clk-gpio type
   - Minor fixes for STM32MP1 clk driver (parents, critical flag, etc.)
   - Split LCDC into two clks on the Marvell MMP2 SoC
   - Various DT of_node refcount fixes
   - Get rid of CLK_IS_BASIC from TI code (yay!)
   - TI Autoidle clk support
   - Fix Amlogic Meson8 APB clock ID name
   - Claim input clocks through DT for Amlogic AXG and GXBB
   - Correct the DU (display unit) parent clock on Renesas RZ/G2E
   - Exynos5433 IMEM CMU crypto clk support (SlimSS)
   - Fix for the PLL-MIPI on the Allwinner A23
   - Fix Rockchip rk3328 PLL rate calculation
   - Add SET_RATE_PARENT flag on display clk of Rockhip rk3066
   - i.MX SCU clk driver clk_set_parent() and cpufreq support"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (150 commits)
  dt-bindings: clock: imx8mq: Fix numbering overlaps and gaps
  clk: ti: clkctrl: Fix clkdm_name regression for TI_CLK_CLKCTRL_COMPAT
  clk: fixup default index for of_clk_get_by_name()
  clk: Move of_clk_*() APIs into clk.c from clkdev.c
  clk: Inform the core about consumer devices
  clk: Introduce of_clk_get_hw_from_clkspec()
  clk: core: clarify the check for runtime PM
  clk: Combine __clk_get() and __clk_create_clk()
  clk: imx8mq: add GPIO clocks to clock tree
  clk: mediatek: correct cpu clock name for MT8173 SoC
  clk: imx: Refactor entire sccg pll clk
  clk: imx: scu: add cpu frequency scaling support
  clk: mediatek: Mark bus and DRAM related clocks as critical
  clk: mediatek: Add flags to mtk_gate
  clk: mediatek: Add MUX_FLAGS macro
  clk: qcom: gcc-sdm845: Define parent of PCIe PIPE clocks
  clk: ingenic: Remove set but not used variable 'enable'
  clk: at91: programmable: remove unneeded register read
  clk: mediatek: using CLK_MUX_ROUND_CLOSEST for the clock of dpi1_sel
  clk: mediatek: add MUX_GATE_FLAGS_2
  ...

treewide: add checks for the return value of memblock_alloc*()

2019-03-12T17:04:02+00:00

Add check for the return value of memblock_alloc*() functions and call
panic() in case of error.  The panic message repeats the one used by
panicing memblock allocators with adjustment of parameters to include
only relevant ones.

The replacement was mostly automated with semantic patches like the one
below with manual massaging of format strings.

  @@
  expression ptr, size, align;
  @@
  ptr = memblock_alloc(size, align);
  + if (!ptr)
  + 	panic("%s: Failed to allocate %lu bytes align=0x%lx\n", __func__, size, align);

[anders.roxell@linaro.org: use '%pa' with 'phys_addr_t' type]
  Link: http://lkml.kernel.org/r/20190131161046.21886-1-anders.roxell@linaro.org
[rppt@linux.ibm.com: fix format strings for panics after memblock_alloc]
  Link: http://lkml.kernel.org/r/1548950940-15145-1-git-send-email-rppt@linux.ibm.com
[rppt@linux.ibm.com: don't panic if the allocation in sparse_buffer_init fails]
  Link: http://lkml.kernel.org/r/20190131074018.GD28876@rapoport-lnx
[akpm@linux-foundation.org: fix xtensa printk warning]
Link: http://lkml.kernel.org/r/1548057848-15136-20-git-send-email-rppt@linux.ibm.com
Signed-off-by: Mike Rapoport 
Signed-off-by: Anders Roxell 
Reviewed-by: Guo Ren 		[c-sky]
Acked-by: Paul Burton 		[MIPS]
Acked-by: Heiko Carstens 	[s390]
Reviewed-by: Juergen Gross 		[Xen]
Reviewed-by: Geert Uytterhoeven 	[m68k]
Acked-by: Max Filippov 		[xtensa]
Cc: Catalin Marinas 
Cc: Christophe Leroy 
Cc: Christoph Hellwig 
Cc: "David S. Miller" 
Cc: Dennis Zhou 
Cc: Greentime Hu 
Cc: Greg Kroah-Hartman 
Cc: Guan Xuetao 
Cc: Guo Ren 
Cc: Mark Salter 
Cc: Matt Turner 
Cc: Michael Ellerman 
Cc: Michal Simek 
Cc: Petr Mladek 
Cc: Richard Weinberger 
Cc: Rich Felker 
Cc: Rob Herring 
Cc: Rob Herring 
Cc: Russell King 
Cc: Stafford Horne 
Cc: Tony Luck 
Cc: Vineet Gupta 
Cc: Yoshinori Sato 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

clk: ti: clkctrl: Fix clkdm_name regression for TI_CLK_CLKCTRL_COMPAT

2019-03-08T18:35:07+00:00

Commit a72d785021cb ("clk: ti: Prepare for remove of OF node name")
changed the code to use kasprintf() for provider->clkdm_name but also
changed the offset used later on by three. We don't need to change the
offset as we already have the extra three characters in the format for
kasprintf with "%pOFnxxx".

This caused the clocks with TI_CLK_CLKCTRL_COMPAT to have NULL
clk->clkdm_name for omap4 and 5. And null clkdm_name can cause module
reset, enable, and idle to fail.

The issue can also be seen also when enabling DEBUG for clkctrl.c
and then we start seeing "clock: could not associate" messages for
omap4 and 5 as the generated name is something like "l4_wkclkdm" instead
of "l4_wkup_clkdm" that's needed.

Let's fix the issue with a partial revert of commit a72d785021cb ("clk:
ti: Prepare for remove of OF node name").

ALso note that in general code should not depend on the dts node names.
And the node names should be generic types like clock-domain in this case.
This could be fixed later by using separate compatible properties for the
clockdomains, or by adding soc_device_match() table with reg offsets
to the driver. But let's fix the regression first.

Fixes: a72d785021cb ("clk: ti: Prepare for remove of OF node name")
Cc: Tero Kristo 
Signed-off-by: Tony Lindgren 
Signed-off-by: Stephen Boyd

clk: fixup default index for of_clk_get_by_name()

2019-03-08T18:35:07+00:00

of_clk_get_by_name() is using -1 for __of_clk_get() index.  It will go
to of_parse_clkspec(), and be used for of_parse_phandle_with_args().
Here, if user doesn't specify clock name (= of_clk_get_by_name(np,
NULL)), this index is still -1, and of_parse_phandle_with_args() will
return -EINVAL (This index will be updated if if it had clock name).
clk_get_by_name(np, NULL) should work, then, default index should be 0
instead of -1. This patch fixes it.

Fixes: 4472287a3b2f ("clk: Introduce of_clk_get_hw_from_clkspec()")
Signed-off-by: Kuninori Morimoto 
Signed-off-by: Stephen Boyd

Merge branch 'clk-parent-rewrite' (early part) into clk-next

2019-03-08T18:35:01+00:00

* 'clk-parent-rewrite' (early part):
  clk: Move of_clk_*() APIs into clk.c from clkdev.c
  clk: Inform the core about consumer devices
  clk: Introduce of_clk_get_hw_from_clkspec()
  clk: core: clarify the check for runtime PM
  clk: Combine __clk_get() and __clk_create_clk()

Merge branches 'clk-typo', 'clk-json-schema', 'clk-mtk-2712-eco' and 'clk-rockchip' into clk-next

2019-03-08T18:34:22+00:00

 - Convert a few clk bindings to JSON schema format
 - 3rd ECO fix for Mediatek MT2712 SoCs

* clk-typo:
  clk: samsung: fix typo

* clk-json-schema:
  dt-bindings: clock: Convert fixed-factor-clock to json-schema
  dt-bindings: clock: Convert fixed-clock binding to json-schema

* clk-mtk-2712-eco:
  clk: mediatek: update clock driver of MT2712
  dt-bindings: clock: add clock for MT2712

* clk-rockchip:
  clk: rockchip: add CLK_SET_RATE_PARENT for rk3066 lcdc dclks
  clk: rockchip: fix frac settings of GPLL clock for rk3328

Merge branch 'clk-at91' into clk-next

2019-03-08T18:29:47+00:00

* clk-at91:
  clk: at91: programmable: remove unneeded register read
  clk: at91: optimize clk_round_rate() for AUDIO_PLL
  clk: at91: enable AUDIOPLL as source for PCKx on SAMA5D2

Merge branches 'clk-ingenic', 'clk-mtk-mux', 'clk-qcom-sdm845-pcie', 'clk-mtk-crit' and 'clk-mtk' into clk-next

2019-03-08T18:29:30+00:00

* clk-ingenic:
  clk: ingenic: Remove set but not used variable 'enable'
  clk: ingenic: Fix doc of ingenic_cgu_div_info
  clk: ingenic: Fix round_rate misbehaving with non-integer dividers
  clk: ingenic: jz4740: Fix gating of UDC clock

* clk-mtk-mux:
  clk: mediatek: using CLK_MUX_ROUND_CLOSEST for the clock of dpi1_sel
  clk: mediatek: add MUX_GATE_FLAGS_2

* clk-qcom-sdm845-pcie:
  clk: qcom: gcc-sdm845: Define parent of PCIe PIPE clocks

* clk-mtk-crit:
  clk: mediatek: Mark bus and DRAM related clocks as critical
  clk: mediatek: Add flags to mtk_gate
  clk: mediatek: Add MUX_FLAGS macro

* clk-mtk:
  clk: mediatek: correct cpu clock name for MT8173 SoC

Merge branches 'clk-qcom-msm8998', 'clk-fractional-parent', 'clk-x86-mv' and 'clk-SA-fixes' into clk-next

2019-03-08T18:29:15+00:00

 - Updates for qcom MSM8998 GCC clks
 - qcom MSM8998 RPM managed clks
 - Random static analysis fixes for clk drivers

* clk-qcom-msm8998:
  clk: qcom: Make common clk_hw registrations
  clk: qcom: smd: Add support for MSM8998 rpm clocks
  clk: qcom: Skip halt checks on gcc_usb3_phy_pipe_clk for 8998
  clk: qcom: Add missing freq for usb30_master_clk on 8998
  clk: qcom: Add CLK_SET_RATE_PARENT for 8998 branch clocks

* clk-fractional-parent:
  clk: fractional-divider: check parent rate only if flag is set

* clk-x86-mv:
  clk: x86: Move clk-lpss.h to platform_data/x86

* clk-SA-fixes:
  clk: mediatek: fix platform_no_drv_owner.cocci warnings
  clk: tegra: dfll: Fix debugfs_simple_attr.cocci warnings
  clk: qoriq: Improve an error message

Merge branches 'clk-qcom-rpmh', 'clk-gpio-sleep', 'clk-stm32mp1', 'clk-qcom-qcs404' and 'clk-actions-s500' into clk-next

2019-03-08T18:27:52+00:00

 - IPA clk support on Qualcomm RPMh clk controllers
 - Support sleeping gpios in clk-gpio type
 - Minor fixes for STM32MP1 clk driver (parents, critical flag, etc.)
 - Actions Semi S500 SoC clk support

* clk-qcom-rpmh:
  clk: qcom: clk-rpmh: Add IPA clock support

* clk-gpio-sleep:
  clk: clk-gpio: add support for sleeping GPIOs in gpio-gate-clk

* clk-stm32mp1:
  dt-bindings: clock: remove unused definition for stm32mp1
  clk: stm32mp1: fix bit width of hse_rtc divider
  clk: stm32mp1: remove unnecessary CLK_DIVIDER_ALLOW_ZERO flag
  clk: stm32mp1: fix HSI divider flag
  clk: stm32mp1: fix mcu divider table
  clk: stm32mp1: set ck_csi as critical clock
  clk: stm32mp1: add CLK_SET_RATE_NO_REPARENT to Kernel clocks
  clk: stm32mp1: parent clocks update

* clk-qcom-qcs404:
  clk: qcom: gcc-qcs404: Add cfg_offset for blsp1_uart3 clock
  clk: qcom: clk-rcg2: Introduce a cfg offset for RCGs
  clk: qcom: remove empty lines in clk-rcg.h

* clk-actions-s500:
  clk: actions: Add clock driver for S500 SoC
  dt-bindings: clock: Add DT bindings for Actions Semi S500 CMU
  clk: actions: Add configurable PLL delay