linux.git/drivers/clk, branch v3.16-rc2

Merge tag 'clk-for-linus-3.16-part2' of git://git.linaro.org/people/mike.turquette/linux

2014-06-16T02:02:20+00:00

Pull more clock framework updates from Mike Turquette:
 "This contains the second half the of the clk changes for 3.16.

  They are simply fixes and code refactoring for the OMAP clock drivers.
  The sunxi clock driver changes include splitting out the one
  mega-driver into several smaller pieces and adding support for the A31
  SoC clocks"

* tag 'clk-for-linus-3.16-part2' of git://git.linaro.org/people/mike.turquette/linux: (25 commits)
  clk: sunxi: document PRCM clock compatible strings
  clk: sunxi: add PRCM (Power/Reset/Clock Management) clks support
  clk: sun6i: Protect SDRAM gating bit
  clk: sun6i: Protect CPU clock
  clk: sunxi: Rework clock protection code
  clk: sunxi: Move the GMAC clock to a file of its own
  clk: sunxi: Move the 24M oscillator to a file of its own
  clk: sunxi: Remove calls to clk_put
  clk: sunxi: document new A31 USB clock compatible
  clk: sunxi: Implement A31 USB clock
  ARM: dts: OMAP5/DRA7: use omap5-mpu-dpll-clock capable of dealing with higher frequencies
  CLK: TI: dpll: support OMAP5 MPU DPLL that need special handling for higher frequencies
  ARM: OMAP5+: dpll: support Duty Cycle Correction(DCC)
  CLK: TI: clk-54xx: Set the rate for dpll_abe_m2x2_ck
  CLK: TI: Driver for DRA7 ATL (Audio Tracking Logic)
  dt:/bindings: DRA7 ATL (Audio Tracking Logic) clock bindings
  ARM: dts: dra7xx-clocks: Correct name for atl clkin3 clock
  CLK: TI: gate: add composite interface clock to OMAP2 only build
  ARM: OMAP2: clock: add DT boot support for cpufreq_ck
  CLK: TI: OMAP2: add clock init support
  ...

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

2014-06-12T21:27:40+00:00

Pull networking updates from David Miller:

 1) Seccomp BPF filters can now be JIT'd, from Alexei Starovoitov.

 2) Multiqueue support in xen-netback and xen-netfront, from Andrew J
    Benniston.

 3) Allow tweaking of aggregation settings in cdc_ncm driver, from Bjørn
    Mork.

 4) BPF now has a "random" opcode, from Chema Gonzalez.

 5) Add more BPF documentation and improve test framework, from Daniel
    Borkmann.

 6) Support TCP fastopen over ipv6, from Daniel Lee.

 7) Add software TSO helper functions and use them to support software
    TSO in mvneta and mv643xx_eth drivers.  From Ezequiel Garcia.

 8) Support software TSO in fec driver too, from Nimrod Andy.

 9) Add Broadcom SYSTEMPORT driver, from Florian Fainelli.

10) Handle broadcasts more gracefully over macvlan when there are large
    numbers of interfaces configured, from Herbert Xu.

11) Allow more control over fwmark used for non-socket based responses,
    from Lorenzo Colitti.

12) Do TCP congestion window limiting based upon measurements, from Neal
    Cardwell.

13) Support busy polling in SCTP, from Neal Horman.

14) Allow RSS key to be configured via ethtool, from Venkata Duvvuru.

15) Bridge promisc mode handling improvements from Vlad Yasevich.

16) Don't use inetpeer entries to implement ID generation any more, it
    performs poorly, from Eric Dumazet.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1522 commits)
  rtnetlink: fix userspace API breakage for iproute2 < v3.9.0
  tcp: fixing TLP's FIN recovery
  net: fec: Add software TSO support
  net: fec: Add Scatter/gather support
  net: fec: Increase buffer descriptor entry number
  net: fec: Factorize feature setting
  net: fec: Enable IP header hardware checksum
  net: fec: Factorize the .xmit transmit function
  bridge: fix compile error when compiling without IPv6 support
  bridge: fix smatch warning / potential null pointer dereference
  via-rhine: fix full-duplex with autoneg disable
  bnx2x: Enlarge the dorq threshold for VFs
  bnx2x: Check for UNDI in uncommon branch
  bnx2x: Fix 1G-baseT link
  bnx2x: Fix link for KR with swapped polarity lane
  sctp: Fix sk_ack_backlog wrap-around problem
  net/core: Add VF link state control policy
  net/fsl: xgmac_mdio is dependent on OF_MDIO
  net/fsl: Make xgmac_mdio read error message useful
  net_sched: drr: warn when qdisc is not work conserving
  ...

clk: sunxi: add PRCM (Power/Reset/Clock Management) clks support

2014-06-11T08:25:02+00:00

The PRCM (Power/Reset/Clock Management) unit provides several clock
devices:
- AR100 clk: used to clock the Power Management co-processor
- AHB0 clk: used to clock the AHB0 bus
- APB0 clk and gates: used to clk peripherals connected to the APB0 bus

Add support for these clks in a separate driver so that they can be probed
as platform devices instead of registered during early init.
This is needed to be able to probe PRCM MFD subdevices.

Signed-off-by: Boris BREZILLON 
Acked-by: Maxime Ripard 
Signed-off-by: Emilio López

clk: sun6i: Protect SDRAM gating bit

2014-06-11T08:25:02+00:00

Prevent the SDRAM controller from being gated by force-enabling it in the
machine code.

Signed-off-by: Maxime Ripard 
Acked-by: Mike Turquette 
Signed-off-by: Emilio López

clk: sun6i: Protect CPU clock

2014-06-11T08:25:01+00:00

Right now, AHB is an indirect child clock of the CPU clock. If that
happens to change, since the CPU clock has no other consumers declared
in Linux, it would be shut down, which is not really a good idea.

Prevent this by forcing it enabled.

Signed-off-by: Maxime Ripard 
Acked-by: Mike Turquette 
Signed-off-by: Emilio López

clk: sunxi: Rework clock protection code

2014-06-11T08:25:01+00:00

Since we start to have a lot of clocks to protect, some of them in a
few SoCs only, it becomes difficult to handle the clock protection
without having to add per machine exceptions.

Add per-SoC data to tell which clock to leave enabled.

Signed-off-by: Maxime Ripard 
Acked-by: Mike Turquette 
Signed-off-by: Emilio López

clk: sunxi: Move the GMAC clock to a file of its own

2014-06-11T07:58:44+00:00

Since we have a folder of our own, we can actually make use of it by
splitting the huge clock file into several sub drivers.

The gmac clock is pretty easy to deal with, since it's pretty much
isolated and doesn't have any dependency on the other clocks.

Signed-off-by: Maxime Ripard 
Acked-by: Mike Turquette 
Signed-off-by: Emilio López

clk: sunxi: Move the 24M oscillator to a file of its own

2014-06-11T07:58:44+00:00

Since we have a folder of our own, we can actually make use of it by
splitting the huge clock file into several sub drivers.

The main oscillator is pretty easy to deal with, since it's pretty much
isolated.

Signed-off-by: Maxime Ripard 
Acked-by: Mike Turquette 
Signed-off-by: Emilio López

clk: sunxi: Remove calls to clk_put

2014-06-11T07:58:44+00:00

Callers of clk_put must disable the clock first. This also means that
as long as the clock is enabled the driver should hold a reference to
that clock. Hence, the call to clk_put here are bogus and should be
removed.

Signed-off-by: Maxime Ripard 
Acked-by: Mike Turquette 
Signed-off-by: Emilio López

clk: sunxi: Implement A31 USB clock

2014-06-11T07:58:43+00:00

The A31 USB clock slightly differ from its older counterparts, mostly
because it has a different gate for each PHY, while the older one had
a single gate for all the phy.

Signed-off-by: Maxime Ripard 
Reviewed-by: Hans de Goede 
Acked-by: Mike Turquette 
Signed-off-by: Emilio López