Display driver assumes it can use clk_set_rate for the display clock
via set-rate-parent mechanism, so add the flag for this to id.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>

Display driver assumes it can use clk_set_rate for the display clock
via set-rate-parent mechanism, so add the flag for this to it.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Reported-by: Jyri Sarha <jsarha@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Tested-by: Jyri Sarha <jsarha@ti.com>

Certain clkctrl clocks, notably the display ones, use the
CLK_SET_RATE_PARENT feature extensively. Add support for this flag
to the clkctrl clocks.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Reported-by: Jyri Sarha <jsarha@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Tested-by: Jyri Sarha <jsarha@ti.com>

* clk-qcom-alpha-pll:
  clk: qcom: add read-only alpha pll post divider operations
  clk: qcom: support for 2 bit PLL post divider
  clk: qcom: support Brammo type Alpha PLL
  clk: qcom: support Huayra type Alpha PLL
  clk: qcom: support for dynamic updating the PLL
  clk: qcom: support for alpha mode configuration
  clk: qcom: flag for 64 bit CONFIG_CTL
  clk: qcom: fix 16 bit alpha support calculation
  clk: qcom: support for alpha pll properties

* clk-check-ops-ptr:
  clk: check ops pointer on clock register

* clk-protect-rate:
  clk: fix set_rate_range when current rate is out of range
  clk: add clk_rate_exclusive api
  clk: cosmetic changes to clk_summary debugfs entry
  clk: add clock protection mechanism to clk core
  clk: use round rate to bail out early in set_rate
  clk: rework calls to round and determine rate callbacks
  clk: add clk_core_set_phase_nolock function
  clk: take the prepare lock out of clk_core_set_parent
  clk: fix incorrect usage of ENOSYS

* clk-omap:
  clk: ti: Drop legacy clk-3xxx-legacy code

We have now had omap3 booting in device tree only mode for a while
and all this code is unused.

Acked-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Re-route all opt-clocks to use the new clkctrl clocks also, instead of
depending on the old dt clocks. Also, add aliases for certain clkctrl
clocks that hwmod core depends upon. The alias list can be stripped
down once hwmod database no longer needs these.

Signed-off-by: Tero Kristo <t-kristo@ti.com>

Add data for dm816 clkctrl clocks, and register it within the clkctrl
driver.

Signed-off-by: Tero Kristo <t-kristo@ti.com>

Add data for dm814 clkctrl clocks, and register it within the clkctrl
driver.

Signed-off-by: Tero Kristo <t-kristo@ti.com>

Add data for am43xx clkctrl clocks, and register it within the clkctrl
driver.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>

Add data for am33xx clkctrl clocks, and register it within the clkctrl
driver.

Signed-off-by: Tero Kristo <t-kristo@ti.com>