Pull MFD updates from Lee Jones:
 "Changes to existing drivers:
   - Use of managed resources - omap, twl4030, ti_am335x_tscadc
   - Advanced error handling - omap
   - Rework clk management - omap
   - Device Tree (re-)work - tc3589x, pm8921, da9055, sec
   - IRC management overhaul and !BROKEN - pm8921
   - Convert to regmap - ssbi, pm8921
   - Use simple power-management ops - ucb1x00
   - Include file clean-up - adp5520, cs5535, janz, lpc_ich,
      - lpc_sch, max14577, mcp-sa11x0, pcf50633-adc, rc5t583,
      	rdc321x-southbridge, retu, smsc-ece1099, ti-ssp, ti_am335x_tscadc,
	tps65912, vexpress-config, wm8350, ywm8350
   - Various bug fixes across the subsystem
      - NULL/invalid pointer dereference prevention
      - Resource leak mitigation,
      - Variable used initialised
      - Staticise various containers
      - Enforce return value checks

  New drivers/supported devices:
   - Add support for s2mps14 and s2mpa01 to sec
   - Add support for da9063 (v5) to da9063
   - Add support for atom-c2000 to gpio-ich
   - Add support for come-{mbt10,cbt6,chl6} to kempld
   - Add support for da9053 to da9052
   - Add support for itco-wdt (v3) and baytrail to lpc_ich
   - Add new drivers for tps65218, rtsx_usb, bcm590xx

  (Re-)moved drivers:
   - twl4030 ==> drivers/iio
   - ti-ssp  ==> /dev/null"

* tag 'mfd-for-linus-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (103 commits)
  mfd: wm5110: Correct default for HEADPHONE_DETECT_1
  mfd: arizona: Correct small errors in the DT binding documentation
  mfd: arizona: Mark DSP clocking register as volatile
  mfd: devicetree: bindings: Add pm8xxx RTC description
  mfd: kempld-core: Fix potential hang-up during boot
  mfd: sec-core: Fix uninitialized 'regmap_rtc' on S2MPA01
  mfd: tps65910: Fix regmap_irq_chip_data leak on mfd_add_devices fail
  mfd: tps65910: Fix possible invalid pointer dereference on regmap_add_irq_chip fail
  mfd: sec-core: Fix I2C dummy device resource leak on probe failure
  mfd: sec-core: Add of_compatible strings for clock MFD cells
  mfd: Remove obsolete ti-ssp driver
  Documentation: mfd: s2mps11: Describe S5M8767 and S2MPS14 clocks
  mfd: bcm590xx: Fix type argument for module device table
  mfd: lpc_ich: Add support for Intel Bay Trail SoC
  mfd: lpc_ich: Add support for NM10 GPIO
  mfd: lpc_ich: Change Avoton to iTCO v3
  watchdog: iTCO_wdt: Add support for v3 silicon
  mfd: lpc_ich: Add support for iTCO v3
  mfd: lpc_ich: Remove lpc_ich_cfg struct use
  mfd: lpc_ich: Only configure watchdog or GPIO when present
  ...

Pull clock framework changes from Mike Turquette:
 "The clock framework changes for 3.15 look similar to past pull
  requests.  Mostly clock driver updates, more Device Tree support in
  the form of common functions useful across platforms and a handful of
  features and fixes to the framework core"

* tag 'clk-for-linus-3.15' of git://git.linaro.org/people/mike.turquette/linux: (86 commits)
  clk: shmobile: fix setting paretn clock rate
  clk: shmobile: rcar-gen2: fix lb/sd0/sd1/sdh clock parent to pll1
  clk: Fix minor errors in of_clk_init() function comments
  clk: reverse default clk provider initialization order in of_clk_init()
  clk: sirf: update copyright years to 2014
  clk: mmp: try to use closer one when do round rate
  clk: mmp: fix the wrong calculation formula
  clk: mmp: fix wrong mask when calculate denominator
  clk: st: Adds quadfs clock binding
  clk: st: Adds clockgen-vcc and clockgen-mux clock binding
  clk: st: Adds clockgen clock binding
  clk: st: Adds divmux and prediv clock binding
  clk: st: Support for A9 MUX clocks
  clk: st: Support for ClockGenA9/DDR/GPU
  clk: st: Support for QUADFS inside ClockGenB/C/D/E/F
  clk: st: Support for VCC-mux and MUX clocks
  clk: st: Support for PLLs inside ClockGenA(s)
  clk: st: Support for DIVMUX and PreDiv Clocks
  clk: support hardware-specific debugfs entries
  clk: s2mps11: Use of_get_child_by_name
  ...

Not all revisions have all the clocks so get the necessary clocks
based on hardware revision.

This should avoid un-necessary clk_get failure messages that were
observed earlier.

Also remove the dummy USB host clocks from the OMAP3 clock data.
These are no longer expected by the driver.

Acked-by: Mike Turquette <mturquette@linaro.org> [OMAP3 CLK data]
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

When arch/arm/mach-omap2/gpmc.c calls clk_get(..., "fck"), it will
get a dummy clock and try to use it. As the rate is configured to zero,
this will result in several divisions by zero, and misconfigured
timings, with devices on the bus being lost in the La La Land.

It is better to remove gpmc_fck from the dummy clocks, so that gpmc.c
can fail gracefully.

Cc: stable@vger.kernel.org # v3.14+
Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
Acked-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

ti/clk-divider.c does not calculate the rates consistently at the moment.

As an example, on OMAP3 we have a clock divider with a source clock of
864000000 Hz. With dividers 6, 7 and 8 the theoretical rates are:

6: 144000000
7: 123428571.428571...
8: 108000000

Calling clk_round_rate() with the rate in the first column will give the
rate in the second column:

144000000 -> 144000000
143999999 -> 123428571
123428572 -> 123428571
123428571 -> 108000000

Note how clk_round_rate() returns 123428571 for rates from 123428572 to
143999999, which is mathematically correct, but when clk_round_rate() is
called with 123428571, the returned value is surprisingly 108000000.

This means that the following code works a bit oddly:

rate = clk_round_rate(clk, 123428572);
clk_set_rate(clk, rate);

As clk_set_rate() also does clock rate rounding, the result is that the
clock is set to the rate of 108000000, not 123428571 returned by the
clk_round_rate.

This patch changes the ti/clk-divider.c to use DIV_ROUND_UP when
calculating the rate. This gives the following behavior which fixes the
inconsistency:

144000000 -> 144000000
143999999 -> 123428572
123428572 -> 123428572
123428571 -> 108000000

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>

cpu0 clock node has no functionality, since cpufreq-cpu0 is already
capable of picking up the clock from dts.

Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>

clk-43xx.c now contains the clock init functionality for am43xx, including
DT clock registration and adding of static clkdev entries.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Tested-by: Nishanth Menon <nm@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>

clk-3xxx.c now contains the clock init functionality for omap3, including
DT clock registration and adding of static clkdev entries.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Tested-by: Nishanth Menon <nm@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>

OMAP3 has interface clocks in addition to functional clocks, which
require special handling for the autoidle and idle status register
offsets mainly.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>

clk-33xx.c now contains the clock init functionality for am33xx, including
DT clock registration and adding of static clkdev entries.

This patch also moves the omap2_clk_enable_init_clocks declaration to
the driver include, as this is needed by the am33xx clock init code.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Tested-by: Nishanth Menon <nm@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>