linux.git/drivers/clk/sprd, branch v6.5 Linux kernel source tree clk: sprd: composite: Simplify determine_rate implementation 2023-06-14T19:43:26+00:00 Stephen Boyd sboyd@kernel.org 2023-06-13T19:54:42+00:00 587dd448d9fcfb53486197c9c4bf5be99c75fb7c The sprd_div_helper_round_rate() function calls divider_round_rate() which calls divider_round_rate_parent() which calls divider_determine_rate(). This call chain converts back and forth from the rate request structure to make a determine_rate clk_op fit with a round_rate clk_op. Simplify the code here by directly calling divider_determine_rate() instead. This fixes a smatch warning where an unsigned long is compared to less than zero, which is impossible. This makes sprd_div_helper_round_rate() unnecessary as well so simply remove it and fold it into the only caller left. Reported-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Closes: https://lore.kernel.org/r/45fdc54e-7ab6-edd6-d55a-473485608473@oracle.com Cc: Maxime Ripard <maxime@cerno.tech> Fixes: 302d2f836d78 ("clk: sprd: composite: Switch to determine_rate") Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20230613195443.1555132-1-sboyd@kernel.org Reviewed-by: Maxime Ripard <mripard@kernel.org> 
The sprd_div_helper_round_rate() function calls divider_round_rate()
which calls divider_round_rate_parent() which calls
divider_determine_rate(). This call chain converts back and forth from
the rate request structure to make a determine_rate clk_op fit with a
round_rate clk_op. Simplify the code here by directly calling
divider_determine_rate() instead.

This fixes a smatch warning where an unsigned long is compared to less
than zero, which is impossible. This makes sprd_div_helper_round_rate()
unnecessary as well so simply remove it and fold it into the only caller
left.

Reported-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Closes: https://lore.kernel.org/r/45fdc54e-7ab6-edd6-d55a-473485608473@oracle.com
Cc: Maxime Ripard <maxime@cerno.tech>
Fixes: 302d2f836d78 ("clk: sprd: composite: Switch to determine_rate")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20230613195443.1555132-1-sboyd@kernel.org
Reviewed-by: Maxime Ripard <mripard@kernel.org>
clk: sprd: composite: Switch to determine_rate 2023-06-09T01:39:34+00:00 Maxime Ripard maxime@cerno.tech 2023-05-05T11:26:03+00:00 302d2f836d78bb6e977054c8ef91ca0d1a902263 The Spreadtrum composite clocks implements a mux with a set_parent hook, but doesn't provide a determine_rate implementation. This is a bit odd, since set_parent() is there to, as its name implies, change the parent of a clock. However, the most likely candidate to trigger that parent change is a call to clk_set_rate(), with determine_rate() figuring out which parent is the best suited for a given rate. The other trigger would be a call to clk_set_parent(), but it's far less used, and it doesn't look like there's any obvious user for that clock. So, the set_parent hook is effectively unused, possibly because of an oversight. However, it could also be an explicit decision by the original author to avoid any reparenting but through an explicit call to clk_set_parent(). The driver does implement round_rate() though, which means that we can change the rate of the clock, but we will never get to change the parent. However, It's hard to tell whether it's been done on purpose or not. Since we'll start mandating a determine_rate() implementation, let's convert the round_rate() implementation to a determine_rate(), which will also make the current behavior explicit. And if it was an oversight, the clock behaviour can be adjusted later on. Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Chunyan Zhang <zhang.lyra@gmail.com> Cc: Orson Zhai <orsonzhai@gmail.com> Acked-by: Chunyan Zhang <zhang.lyra@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20221018-clk-range-checks-fixes-v4-61-971d5077e7d2@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org> 
The Spreadtrum composite clocks implements a mux with a set_parent
hook, but doesn't provide a determine_rate implementation.

This is a bit odd, since set_parent() is there to, as its name implies,
change the parent of a clock. However, the most likely candidate to
trigger that parent change is a call to clk_set_rate(), with
determine_rate() figuring out which parent is the best suited for a
given rate.

The other trigger would be a call to clk_set_parent(), but it's far less
used, and it doesn't look like there's any obvious user for that clock.

So, the set_parent hook is effectively unused, possibly because of an
oversight. However, it could also be an explicit decision by the
original author to avoid any reparenting but through an explicit call to
clk_set_parent().

The driver does implement round_rate() though, which means that we can
change the rate of the clock, but we will never get to change the
parent.

However, It's hard to tell whether it's been done on purpose or not.

Since we'll start mandating a determine_rate() implementation, let's
convert the round_rate() implementation to a determine_rate(), which
will also make the current behavior explicit. And if it was an
oversight, the clock behaviour can be adjusted later on.

Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Chunyan Zhang <zhang.lyra@gmail.com>
Cc: Orson Zhai <orsonzhai@gmail.com>
Acked-by: Chunyan Zhang <zhang.lyra@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20221018-clk-range-checks-fixes-v4-61-971d5077e7d2@cerno.tech
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux 2023-04-30T00:29:39+00:00 Linus Torvalds torvalds@linux-foundation.org 2023-04-30T00:29:39+00:00 e81507acdc19d91df4121f409871f3e4e055f6c2 Pull clk updates from Stephen Boyd: "Nothing looks out of the ordinary in this batch of clk driver updates. There are a couple patches to the core clk framework, but they're all basically cleanups or debugging aids. The driver updates and new additions are dominated in the diffstat by Qualcomm and MediaTek drivers. Qualcomm gained a handful of new drivers for various SoCs, and MediaTek gained a bunch of drivers for MT8188. The MediaTek drivers are being modernized as well, so there are updates all over that vendor's clk drivers. There's also a couple other new clk drivers in here, for example the Starfive JH7110 SoC support is added. Outside of the two major SoC vendors though, we have the usual collection of non-critical fixes and cleanups to various clk drivers. It's good to see that we're getting more cleanups and modernization patches. Maybe one day we'll be able to properly split clk providers from clk consumers. Core: - Print an informational message before disabling unused clks New Drivers: - BCM63268 timer clock and reset controller - Frequency Hopping (FHCTL) on MediaTek MT6795, MT8173, MT8192 and MT8195 SoCs - Mediatek MT8188 SoC clk drivers - Clock driver for Sunplus SP7021 SoC - Clk driver support for Loongson-2 SoCs - Clock driver for Skyworks Si521xx I2C PCIe clock generators - Initial Starfive JH7110 clk/reset support - Global clock controller drivers for Qualcomm SM7150, IPQ9574, MSM8917 and IPQ5332 SoCs - GPU clock controller drivers for SM6115, SM6125, SM6375 and SA8775P SoCs Updates: - Shrink size of clk_fractional_divider a little - Convert various clk drivers to devm_of_clk_add_hw_provider() - Convert platform clk drivers to remove_new() - Converted most Mediatek clock drivers to struct platform_driver - MediaTek clock drivers can be built as modules - Reimplement Loongson-1 clk driver with DT support - Migrate socfpga clk driver to of_clk_add_hw_provider() - Support for i3c clks on Aspeed ast2600 SoCs - Add clock generic devm_clk_hw_register_gate_parent_data - Add audiomix block control for i.MX8MP - Add support for determine_rate to i.MX composite-8m - Let the LCDIF Pixel clock of i.MX8MM and i.MX8MN set parent rate - Provide clock name in error message for clk-gpr-mux on get parent failure - Drop duplicate imx_clk_mux_flags macro - Register the i.MX8MP Media Disp2 Pix clock as bus clock - Add Media LDB root clock to i.MX8MP - Make i.MX8MP nand_usdhc_bus clock as non-critical - Fix the rate table for i.MX fracn-gppll - Disable HW control for the fracn-gppll in order to be controlled by register write - Add support for interger PLL in fracn-gppll - Add mcore_booted module parameter to i.MX93 provider - Add NIC, A55 and ARM PLL clocks to i.MX93 - Fix i.MX8ULP XBAR_DIVBUS and AD_SLOW clock parents - Use "divider closest" clock type for PLL4_PFD dividers on i.MX8ULP to get more accurate clock rates - Mark the MU0_Bi and TPM5 clocks on i.MX8ULP as critical - Update some of the i.MX critical clocks flags to allow glitchless on-the-fly rate change. - Add I2C5 clock on Renesas R-Car V3H - Exynos850: Add CMU_G3D clock controller for the Mali GPU - Extract Exynos5433 (ARM64) clock controller power management code to common driver parts - Exynos850: make PMU_ALIVE_PCLK clock critical - Add Audio, thermal, camera (CSI-2), Image Signal Processor/Channel Selector (ISPCS), and video capture (VIN) clocks on Renesas R-Car V4H - Add video capture (VIN) clocks on Renesas R-Car V3H - Add Cortex-A53 System CPU (Z2) clocks on Renesas R-Car V3M and V3H - Support for Stromer Plus PLL on Qualcomm IPQ5332 - Add a missing reset to Qualcomm QCM2290 - Migrate Qualcomm IPQ4019 to clk_parent_data - Make USB GDSCs enter retention state when disabled on Qualcomm SM6375, MSM8996 and MSM8998 SoCs - Set floor rounding clk_ops for Qualcomm QCM2290 SDCC2 clk - Add two EMAC GDSCs on Qualcomm SC8280XP - Use shared rcg clk ops in Qualcomm SM6115 GCC - Park Qualcomm SM8350 PCIe PIPE clks when disabled - Add GDSCs to Qualcomm SC7280 LPASS audio clock controller - Add missing XO clocks to Qualcomm MSM8226 and MSM8974 - Convert some Qualcomm clk DT bindings to YAML - Reparenting fix for the clock supplying camera modules on Rockchip rk3399 - Mark more critical (bus-)clocks on Rockchip rk3588" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (290 commits) clk: qcom: gcc-sc8280xp: Add EMAC GDSCs clk: starfive: Delete the redundant dev_set_drvdata() in JH7110 clock drivers clk: rockchip: rk3588: make gate linked clocks critical clk: qcom: dispcc-qcm2290: Remove inexistent DSI1PHY clk clk: qcom: add the GPUCC driver for sa8775p dt-bindings: clock: qcom: describe the GPUCC clock for SA8775P clk: qcom: gcc-sm8350: fix PCIe PIPE clocks handling clk: qcom: lpassaudiocc-sc7280: Add required gdsc power domain clks in lpass_cc_sc7280_desc clk: qcom: lpasscc-sc7280: Skip qdsp6ss clock registration dt-bindings: clock: qcom,sc7280-lpasscc: Add qcom,adsp-pil-mode property clk: starfive: Avoid casting iomem pointers clk: microchip: fix potential UAF in auxdev release callback clk: qcom: rpm: Use managed `of_clk_add_hw_provider()` clk: mediatek: fhctl: Mark local variables static clk: sifive: make SiFive clk drivers depend on ARCH_ symbols clk: uniphier: Use managed `of_clk_add_hw_provider()` clk: si5351: Use managed `of_clk_add_hw_provider()` clk: si570: Use managed `of_clk_add_hw_provider()` clk: si514: Use managed `of_clk_add_hw_provider()` clk: lmk04832: Use managed `of_clk_add_hw_provider()` ... 
Pull clk updates from Stephen Boyd:
 "Nothing looks out of the ordinary in this batch of clk driver updates.

  There are a couple patches to the core clk framework, but they're all
  basically cleanups or debugging aids. The driver updates and new
  additions are dominated in the diffstat by Qualcomm and MediaTek
  drivers. Qualcomm gained a handful of new drivers for various SoCs,
  and MediaTek gained a bunch of drivers for MT8188. The MediaTek
  drivers are being modernized as well, so there are updates all over
  that vendor's clk drivers. There's also a couple other new clk drivers
  in here, for example the Starfive JH7110 SoC support is added.

  Outside of the two major SoC vendors though, we have the usual
  collection of non-critical fixes and cleanups to various clk drivers.
  It's good to see that we're getting more cleanups and modernization
  patches. Maybe one day we'll be able to properly split clk providers
  from clk consumers.

  Core:
   - Print an informational message before disabling unused clks

  New Drivers:
   - BCM63268 timer clock and reset controller
   - Frequency Hopping (FHCTL) on MediaTek MT6795, MT8173, MT8192 and
     MT8195 SoCs
   - Mediatek MT8188 SoC clk drivers
   - Clock driver for Sunplus SP7021 SoC
   - Clk driver support for Loongson-2 SoCs
   - Clock driver for Skyworks Si521xx I2C PCIe clock generators
   - Initial Starfive JH7110 clk/reset support
   - Global clock controller drivers for Qualcomm SM7150, IPQ9574,
     MSM8917 and IPQ5332 SoCs
   - GPU clock controller drivers for SM6115, SM6125, SM6375 and SA8775P
     SoCs

  Updates:
   - Shrink size of clk_fractional_divider a little
   - Convert various clk drivers to devm_of_clk_add_hw_provider()
   - Convert platform clk drivers to remove_new()
   - Converted most Mediatek clock drivers to struct platform_driver
   - MediaTek clock drivers can be built as modules
   - Reimplement Loongson-1 clk driver with DT support
   - Migrate socfpga clk driver to of_clk_add_hw_provider()
   - Support for i3c clks on Aspeed ast2600 SoCs
   - Add clock generic devm_clk_hw_register_gate_parent_data
   - Add audiomix block control for i.MX8MP
   - Add support for determine_rate to i.MX composite-8m
   - Let the LCDIF Pixel clock of i.MX8MM and i.MX8MN set parent rate
   - Provide clock name in error message for clk-gpr-mux on get parent
     failure
   - Drop duplicate imx_clk_mux_flags macro
   - Register the i.MX8MP Media Disp2 Pix clock as bus clock
   - Add Media LDB root clock to i.MX8MP
   - Make i.MX8MP nand_usdhc_bus clock as non-critical
   - Fix the rate table for i.MX fracn-gppll
   - Disable HW control for the fracn-gppll in order to be controlled by
     register write
   - Add support for interger PLL in fracn-gppll
   - Add mcore_booted module parameter to i.MX93 provider
   - Add NIC, A55 and ARM PLL clocks to i.MX93
   - Fix i.MX8ULP XBAR_DIVBUS and AD_SLOW clock parents
   - Use "divider closest" clock type for PLL4_PFD dividers on i.MX8ULP
     to get more accurate clock rates
   - Mark the MU0_Bi and TPM5 clocks on i.MX8ULP as critical
   - Update some of the i.MX critical clocks flags to allow glitchless
     on-the-fly rate change.
   - Add I2C5 clock on Renesas R-Car V3H
   - Exynos850: Add CMU_G3D clock controller for the Mali GPU
   - Extract Exynos5433 (ARM64) clock controller power management code
     to common driver parts
   - Exynos850: make PMU_ALIVE_PCLK clock critical
   - Add Audio, thermal, camera (CSI-2), Image Signal Processor/Channel
     Selector (ISPCS), and video capture (VIN) clocks on Renesas R-Car
     V4H
   - Add video capture (VIN) clocks on Renesas R-Car V3H
   - Add Cortex-A53 System CPU (Z2) clocks on Renesas R-Car V3M and V3H
   - Support for Stromer Plus PLL on Qualcomm IPQ5332
   - Add a missing reset to Qualcomm QCM2290
   - Migrate Qualcomm IPQ4019 to clk_parent_data
   - Make USB GDSCs enter retention state when disabled on Qualcomm
     SM6375, MSM8996 and MSM8998 SoCs
   - Set floor rounding clk_ops for Qualcomm QCM2290 SDCC2 clk
   - Add two EMAC GDSCs on Qualcomm SC8280XP
   - Use shared rcg clk ops in Qualcomm SM6115 GCC
   - Park Qualcomm SM8350 PCIe PIPE clks when disabled
   - Add GDSCs to Qualcomm SC7280 LPASS audio clock controller
   - Add missing XO clocks to Qualcomm MSM8226 and MSM8974
   - Convert some Qualcomm clk DT bindings to YAML
   - Reparenting fix for the clock supplying camera modules on Rockchip
     rk3399
   - Mark more critical (bus-)clocks on Rockchip rk3588"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (290 commits)
  clk: qcom: gcc-sc8280xp: Add EMAC GDSCs
  clk: starfive: Delete the redundant dev_set_drvdata() in JH7110 clock drivers
  clk: rockchip: rk3588: make gate linked clocks critical
  clk: qcom: dispcc-qcm2290: Remove inexistent DSI1PHY clk
  clk: qcom: add the GPUCC driver for sa8775p
  dt-bindings: clock: qcom: describe the GPUCC clock for SA8775P
  clk: qcom: gcc-sm8350: fix PCIe PIPE clocks handling
  clk: qcom: lpassaudiocc-sc7280: Add required gdsc power domain clks in lpass_cc_sc7280_desc
  clk: qcom: lpasscc-sc7280: Skip qdsp6ss clock registration
  dt-bindings: clock: qcom,sc7280-lpasscc: Add qcom,adsp-pil-mode property
  clk: starfive: Avoid casting iomem pointers
  clk: microchip: fix potential UAF in auxdev release callback
  clk: qcom: rpm: Use managed `of_clk_add_hw_provider()`
  clk: mediatek: fhctl: Mark local variables static
  clk: sifive: make SiFive clk drivers depend on ARCH_ symbols
  clk: uniphier: Use managed `of_clk_add_hw_provider()`
  clk: si5351: Use managed `of_clk_add_hw_provider()`
  clk: si570: Use managed `of_clk_add_hw_provider()`
  clk: si514: Use managed `of_clk_add_hw_provider()`
  clk: lmk04832: Use managed `of_clk_add_hw_provider()`
  ...
clk: sprd: set max_register according to mapping range 2023-03-16T23:33:11+00:00 Chunyan Zhang chunyan.zhang@unisoc.com 2023-03-16T02:36:24+00:00 47d43086531f10539470a63e8ad92803e686a3dd In sprd clock driver, regmap_config.max_register was set to a fixed value which is likely larger than the address range configured in device tree, when reading registers through debugfs it would cause access violation. Fixes: d41f59fd92f2 ("clk: sprd: Add common infrastructure") Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com> Link: https://lore.kernel.org/r/20230316023624.758204-1-chunyan.zhang@unisoc.com Signed-off-by: Stephen Boyd <sboyd@kernel.org> 
In sprd clock driver, regmap_config.max_register was set to a fixed value
which is likely larger than the address range configured in device tree,
when reading registers through debugfs it would cause access violation.

Fixes: d41f59fd92f2 ("clk: sprd: Add common infrastructure")
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Link: https://lore.kernel.org/r/20230316023624.758204-1-chunyan.zhang@unisoc.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
clk: Use of_property_present() for testing DT property presence 2023-03-15T00:35:38+00:00 Rob Herring robh@kernel.org 2023-03-10T14:47:01+00:00 d02fddf24f984b977633c56e10653a8ff19e8c7b It is preferred to use typed property access functions (i.e. of_property_read_<type> functions) rather than low-level of_get_property/of_find_property functions for reading properties. As part of this, convert of_get_property/of_find_property calls to the recently added of_property_present() helper when we just want to test for presence of a property and nothing more. Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230310144701.1541504-1-robh@kernel.org Acked-by: Chunyan Zhang <zhang.lyra@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> 
It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties. As
part of this, convert of_get_property/of_find_property calls to the
recently added of_property_present() helper when we just want to test
for presence of a property and nothing more.

Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230310144701.1541504-1-robh@kernel.org
Acked-by: Chunyan Zhang <zhang.lyra@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
clk: sprd: Add dependency for SPRD_UMS512_CLK 2023-02-11T00:13:48+00:00 Cixi Geng cixi.geng1@unisoc.com 2023-02-01T09:13:00+00:00 998ab667e23e38960d4f967648380292724fa348 Add depends on and default for ums512 clk config. Signed-off-by: Cixi Geng <cixi.geng1@unisoc.com> Link: https://lore.kernel.org/r/20230201091300.3201-1-cixi.geng@linux.dev Signed-off-by: Stephen Boyd <sboyd@kernel.org> 
Add depends on and default for ums512 clk config.

Signed-off-by: Cixi Geng <cixi.geng1@unisoc.com>
Link: https://lore.kernel.org/r/20230201091300.3201-1-cixi.geng@linux.dev
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Merge branches 'clk-fixed-rate', 'clk-spreadtrum', 'clk-pxa' and 'clk-ti' into clk-next 2022-10-04T17:54:14+00:00 Stephen Boyd sboyd@kernel.org 2022-10-04T17:54:14+00:00 b7f257ceb3c88ee3e2c6b0d1db703c818d3971f1 - More devm helpers for fixed rate registration - Add Spreadtrum UMS512 SoC clk support - Various PXA168 clk driver fixes * clk-fixed-rate: clk: fixed-rate: add devm_clk_hw_register_fixed_rate clk: asm9260: use parent index to link the reference clock * clk-spreadtrum: clk: sprd: Add clocks support for UMS512 * clk-pxa: clk: pxa: add a check for the return value of kzalloc() clk: mmp: pxa168: control shared SDH bits with separate clock dt-bindings: marvell,pxa168: add clock ids for SDH AXI clocks clk: mmp: pxa168: add clocks for SDH2 and SDH3 dt-bindings: marvell,pxa168: add clock id for SDH3 clk: mmp: pxa168: fix GPIO clock enable bits clk: mmp: pxa168: add muxes for more peripherals clk: mmp: pxa168: fix incorrect parent clocks clk: mmp: pxa168: fix const-correctness clk: mmp: pxa168: add new clocks for peripherals dt-bindings: marvell,pxa168: add clock ids for additional dividers clk: mmp: pxa168: fix incorrect dividers clk: mmp: pxa168: add additional register defines * clk-ti: clk: davinci: cfgchip: Use dev_err_probe() helper clk: davinci: pll: fix spelling typo in comment MAINTAINERS: add header file to TI DAVINCI SERIES CLOCK DRIVER 
 - More devm helpers for fixed rate registration
 - Add Spreadtrum UMS512 SoC clk support
 - Various PXA168 clk driver fixes

* clk-fixed-rate:
  clk: fixed-rate: add devm_clk_hw_register_fixed_rate
  clk: asm9260: use parent index to link the reference clock

* clk-spreadtrum:
  clk: sprd: Add clocks support for UMS512

* clk-pxa:
  clk: pxa: add a check for the return value of kzalloc()
  clk: mmp: pxa168: control shared SDH bits with separate clock
  dt-bindings: marvell,pxa168: add clock ids for SDH AXI clocks
  clk: mmp: pxa168: add clocks for SDH2 and SDH3
  dt-bindings: marvell,pxa168: add clock id for SDH3
  clk: mmp: pxa168: fix GPIO clock enable bits
  clk: mmp: pxa168: add muxes for more peripherals
  clk: mmp: pxa168: fix incorrect parent clocks
  clk: mmp: pxa168: fix const-correctness
  clk: mmp: pxa168: add new clocks for peripherals
  dt-bindings: marvell,pxa168: add clock ids for additional dividers
  clk: mmp: pxa168: fix incorrect dividers
  clk: mmp: pxa168: add additional register defines

* clk-ti:
  clk: davinci: cfgchip: Use dev_err_probe() helper
  clk: davinci: pll: fix spelling typo in comment
  MAINTAINERS: add header file to TI DAVINCI SERIES CLOCK DRIVER
clk: sprd: Add clocks support for UMS512 2022-09-30T19:22:19+00:00 Cixi Geng cixi.geng1@unisoc.com 2022-09-09T15:24:21+00:00 af3bd36573e3686a82ebb79114cd9c9ccbd5374f Add the list of clocks for the Unisoc UMS512, along with clock initialization. Signed-off-by: Cixi Geng <cixi.geng1@unisoc.com> Link: https://lore.kernel.org/r/20220909152421.278662-3-gengcixi@gmail.com Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> 
Add the list of clocks for the Unisoc UMS512, along with clock
initialization.

Signed-off-by: Cixi Geng <cixi.geng1@unisoc.com>
Link: https://lore.kernel.org/r/20220909152421.278662-3-gengcixi@gmail.com
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
clk: sprd: Hold reference returned by of_get_parent() 2022-08-19T21:50:24+00:00 Liang He windhl@126.com 2022-07-04T00:47:29+00:00 91e6455bf715fb1558a0bf8f645ec1c131254a3c We should hold the reference returned by of_get_parent() and use it to call of_node_put() for refcount balance. Fixes: f95e8c7923d1 ("clk: sprd: support to get regmap from parent node") Signed-off-by: Liang He <windhl@126.com> Link: https://lore.kernel.org/r/20220704004729.272481-1-windhl@126.com Reviewed-by: Orson Zhai <orsonzhai@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> 
We should hold the reference returned by of_get_parent() and use it
to call of_node_put() for refcount balance.

Fixes: f95e8c7923d1 ("clk: sprd: support to get regmap from parent node")
Signed-off-by: Liang He <windhl@126.com>
Link: https://lore.kernel.org/r/20220704004729.272481-1-windhl@126.com
Reviewed-by: Orson Zhai <orsonzhai@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux 2020-06-10T18:42:19+00:00 Linus Torvalds torvalds@linux-foundation.org 2020-06-10T18:42:19+00:00 6f630784cc0d92fb58ea326e2bc01aa056279ecb Pull clk updates from Stephen Boyd: "This time around we have four lines of diff in the core framework, removing a function that isn't used anymore. Otherwise the main new thing for the common clk framework is that it is selectable in the Kconfig language now. Hopefully this will let clk drivers and clk consumers be testable on more than the architectures that support the clk framework. The goal is to introduce some Kunit tests for the framework. Outside of the core framework we have the usual set of various driver updates and non-critical fixes. The dirstat shows that the new Baikal-T1 driver is the largest addition this time around in terms of lines of code. After that the x86 (Intel), Qualcomm, and Mediatek drivers introduce many lines to support new or upcoming SoCs. After that the dirstat shows the usual suspects working on their SoC support by fixing minor bugs, correcting data and converting some of their DT bindings to YAML. Core: - Allow the COMMON_CLK config to be selectable New Drivers: - Clk driver for Baikal-T1 SoCs - Mediatek MT6765 clock support - Support for Intel Agilex clks - Add support for X1830 and X1000 Ingenic SoC clk controllers - Add support for the new Renesas RZ/G1H (R8A7742) SoC - Add support for Qualcomm's MSM8939 Generic Clock Controller Updates: - Support IDT VersaClock 5P49V5925 - Bunch of updates for HSDK clock generation unit (CGU) driver - Start making audio and GPU clks work on Marvell MMP2/MMP3 SoCs - Add some GPU, NPU, and UFS clks to Qualcomm SM8150 driver - Enable supply regulators for GPU gdscs on Qualcomm SoCs - Add support for Si5342, Si5344 and Si5345 chips - Support custom flags in Xilinx zynq firmware - Various small fixes to the Xilinx clk driver - A single minor rounding fix for the legacy Allwinner clock support - A few patches from Abel Vesa as preparation of adding audiomix clock support on i.MX - A couple of cleanups from Anson Huang for i.MX clk-sscg-pll and clk-pllv3 drivers - Drop dependency on ARM64 for i.MX8M clock driver, to support aarch32 mode on aarch64 hardware - A series from Peng Fan to improve i.MX8M clock drivers, using composite clock for core and bus clk slice - Set a better parent clock for flexcan on i.MX6UL to support CiA102 defined bit rates - A couple changes for EMC frequency scaling on Tegra210 - Support for CPU frequency scaling on Tegra20/Tegra30 - New clk gate for CSI test pattern generator on Tegra210 - Regression fixes for Samsung exynos542x and exynos5433 SoCs - Use of fallthrough; attribute for Samsung s3c24xx - Updates and fixup HDMI and video clocks on Meson8b - Fixup reset polarity on Meson8b - Fix GPU glitch free mux switch on Meson gx and g12 - A minor fix for the currently unused suspend/resume handling on Renesas RZ/A1 and RZ/A2 - Two more conversions of Renesas DT bindings to json-schema - Add support for the USB 2.0 clock selector on Renesas R-Car M3-W+" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (155 commits) clk: mediatek: Remove ifr{0,1}_cfg_regs structures clk: baikal-t1: remove redundant assignment to variable 'divider' clk: baikal-t1: fix spelling mistake "Uncompatible" -> "Incompatible" dt-bindings: clock: Add a missing include to MMP Audio Clock binding dt: Add bindings for IDT VersaClock 5P49V5925 clk: vc5: Add support for IDT VersaClock 5P49V6965 clk: Add Baikal-T1 CCU Dividers driver clk: Add Baikal-T1 CCU PLLs driver dt-bindings: clk: Add Baikal-T1 CCU Dividers binding dt-bindings: clk: Add Baikal-T1 CCU PLLs binding clk: mediatek: assign the initial value to clk_init_data of mtk_mux clk: mediatek: Add MT6765 clock support clk: mediatek: add mt6765 clock IDs dt-bindings: clock: mediatek: document clk bindings vcodecsys for Mediatek MT6765 SoC dt-bindings: clock: mediatek: document clk bindings mipi0a for Mediatek MT6765 SoC dt-bindings: clock: mediatek: document clk bindings for Mediatek MT6765 SoC CLK: HSDK: CGU: add support for 148.5MHz clock CLK: HSDK: CGU: support PLL bypassing CLK: HSDK: CGU: check if PLL is bypassed first clk: clk-si5341: Add support for the Si5345 series ... 
Pull clk updates from Stephen Boyd:
 "This time around we have four lines of diff in the core framework,
  removing a function that isn't used anymore. Otherwise the main new
  thing for the common clk framework is that it is selectable in the
  Kconfig language now. Hopefully this will let clk drivers and clk
  consumers be testable on more than the architectures that support the
  clk framework. The goal is to introduce some Kunit tests for the
  framework.

  Outside of the core framework we have the usual set of various driver
  updates and non-critical fixes. The dirstat shows that the new
  Baikal-T1 driver is the largest addition this time around in terms of
  lines of code. After that the x86 (Intel), Qualcomm, and Mediatek
  drivers introduce many lines to support new or upcoming SoCs. After
  that the dirstat shows the usual suspects working on their SoC support
  by fixing minor bugs, correcting data and converting some of their DT
  bindings to YAML.

  Core:
   - Allow the COMMON_CLK config to be selectable

  New Drivers:
   - Clk driver for Baikal-T1 SoCs
   - Mediatek MT6765 clock support
   - Support for Intel Agilex clks
   - Add support for X1830 and X1000 Ingenic SoC clk controllers
   - Add support for the new Renesas RZ/G1H (R8A7742) SoC
   - Add support for Qualcomm's MSM8939 Generic Clock Controller

  Updates:
   - Support IDT VersaClock 5P49V5925
   - Bunch of updates for HSDK clock generation unit (CGU) driver
   - Start making audio and GPU clks work on Marvell MMP2/MMP3 SoCs
   - Add some GPU, NPU, and UFS clks to Qualcomm SM8150 driver
   - Enable supply regulators for GPU gdscs on Qualcomm SoCs
   - Add support for Si5342, Si5344 and Si5345 chips
   - Support custom flags in Xilinx zynq firmware
   - Various small fixes to the Xilinx clk driver
   - A single minor rounding fix for the legacy Allwinner clock support
   - A few patches from Abel Vesa as preparation of adding audiomix
     clock support on i.MX
   - A couple of cleanups from Anson Huang for i.MX clk-sscg-pll and
     clk-pllv3 drivers
   - Drop dependency on ARM64 for i.MX8M clock driver, to support
     aarch32 mode on aarch64 hardware
   - A series from Peng Fan to improve i.MX8M clock drivers, using
     composite clock for core and bus clk slice
   - Set a better parent clock for flexcan on i.MX6UL to support CiA102
     defined bit rates
   - A couple changes for EMC frequency scaling on Tegra210
   - Support for CPU frequency scaling on Tegra20/Tegra30
   - New clk gate for CSI test pattern generator on Tegra210
   - Regression fixes for Samsung exynos542x and exynos5433 SoCs
   - Use of fallthrough; attribute for Samsung s3c24xx
   - Updates and fixup HDMI and video clocks on Meson8b
   - Fixup reset polarity on Meson8b
   - Fix GPU glitch free mux switch on Meson gx and g12
   - A minor fix for the currently unused suspend/resume handling on
     Renesas RZ/A1 and RZ/A2
   - Two more conversions of Renesas DT bindings to json-schema
   - Add support for the USB 2.0 clock selector on Renesas R-Car M3-W+"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (155 commits)
  clk: mediatek: Remove ifr{0,1}_cfg_regs structures
  clk: baikal-t1: remove redundant assignment to variable 'divider'
  clk: baikal-t1: fix spelling mistake "Uncompatible" -> "Incompatible"
  dt-bindings: clock: Add a missing include to MMP Audio Clock binding
  dt: Add bindings for IDT VersaClock 5P49V5925
  clk: vc5: Add support for IDT VersaClock 5P49V6965
  clk: Add Baikal-T1 CCU Dividers driver
  clk: Add Baikal-T1 CCU PLLs driver
  dt-bindings: clk: Add Baikal-T1 CCU Dividers binding
  dt-bindings: clk: Add Baikal-T1 CCU PLLs binding
  clk: mediatek: assign the initial value to clk_init_data of mtk_mux
  clk: mediatek: Add MT6765 clock support
  clk: mediatek: add mt6765 clock IDs
  dt-bindings: clock: mediatek: document clk bindings vcodecsys for Mediatek MT6765 SoC
  dt-bindings: clock: mediatek: document clk bindings mipi0a for Mediatek MT6765 SoC
  dt-bindings: clock: mediatek: document clk bindings for Mediatek MT6765 SoC
  CLK: HSDK: CGU: add support for 148.5MHz clock
  CLK: HSDK: CGU: support PLL bypassing
  CLK: HSDK: CGU: check if PLL is bypassed first
  clk: clk-si5341: Add support for the Si5345 series
  ...