linux.git/drivers/clk/rockchip, branch v6.8

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

2024-01-12T21:42:35+00:00

Pull clk updates from Stephen Boyd:
 "Only a couple new SoCs have support added this time, primarily for
  Qualcomm SM8650 based on the diffstat. Otherwise this is a collection
  of non-critical fixes and cleanups to various clk drivers and their DT
  bindings.

  Nothing is changed in the core clk framework this time, although
  there's a patch to fix a basic clk type initialization function. In
  general, this pile looks to be on the smaller side.

  New Drivers:
   - Global, display, gpu, tcsr, and rpmh clocks on Qualcomm SM8650
   - Mediatek MT7988 SoC clocks

  Updates:
   - Update Zynqmp driver for Versal NET platforms
   - Add clk driver for Versal clocking wizard IP
   - Support for stm32mp25 clks
   - Add glitch free PLL setting support to si5351 clk driver
   - Add DSI clocks on Amlogic g12/sm1
   - Add CSI and ISP clocks on Amlogic g12/sm1
   - Document bindings for i.MX93 ANATOP clock driver
   - Free clk_node in i.MX SCU driver for resource with different owner
   - Update the LVDS clocks to be compatible with i.MX SCU firmware 1.15
   - Fix the name of the fvco in i.MX pll14xx by renaming it to fout
   - Add EtherNet TSN and PCIe clocks on the Renesas R-Car V4H SoC
   - Add interrupt controller and Ethernet clocks and resets on Renesas
     RZ/G3S
   - Check reset monitor registers on Renesas RZ/G2L-alike SoCs
   - Reuse reset functionality in the Renesas RZ/G2L clock driver
   - Global and RPMh clock support for the Qualcomm X1E80100 SoC
   - Support for the Stromer APCS PLL found in Qualcomm IPQ5018
   - Add a new type of branch clock, with support for controlling
     separate memory control bits, to the Qualcomm clk driver
   - Use above new branch type in Qualcomm ECPRI clk driver for QDU1000
     and QRU1000
   - Add a number of missing clocks related to CSI2 on Qualcomm MSM8939
   - Add support for the camera clock controller on Qualcomm SC8280XP
   - Correct PLL configuration in GPU and video clock controllers for
     Qualcomm SM8150
   - Add runtime PM support and a few missing resets to Qualcomm SM8150
     video clock controller
   - Fix configuration of various GCC GDSCs on Qualcomm SM8550
   - Mark shared RCGs appropriately in the Qualcomm SM8550 GCC driver
   - Fix up GPU and display clock controllers PLL configuration settings
     on Qualcomm SM8550
   - Cleanup variable init in Allwinner nkm module
   - Convert various DT bindings to YAML
   - A few kernel-doc fixes for Samsung SoC clock controllers"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (93 commits)
  clk: mediatek: add drivers for MT7988 SoC
  clk: mediatek: add pcw_chg_bit control for PLLs of MT7988
  dt-bindings: clock: mediatek: add clock controllers of MT7988
  dt-bindings: reset: mediatek: add MT7988 ethwarp reset IDs
  dt-bindings: clock: mediatek: add MT7988 clock IDs
  clk: mediatek: mt8188-topckgen: Refactor parents for top_dp/edp muxes
  clk: mediatek: mt8195-topckgen: Refactor parents for top_dp/edp muxes
  clk: mediatek: clk-mux: Support custom parent indices for muxes
  dt-bindings: clock: sophgo: Add clock controller of CV1800 series SoC
  clk: starfive: jh7100: Add CLK_SET_RATE_PARENT to gmac_tx
  clk: starfive: Add flags argument to JH71X0__MUX macro
  clk: imx: pll14xx: change naming of fvco to fout
  clk: imx: clk-imx8qxp: fix LVDS bypass, pixel and phy clocks
  clk: imx: scu: Fix memory leak in __imx_clk_gpr_scu()
  clk: fixed-rate: fix clk_hw_register_fixed_rate_with_accuracy_parent_hw
  clk: qcom: dispcc-sm8650: Add test_ctl parameters to PLL config
  clk: qcom: gpucc-sm8650: Add test_ctl parameters to PLL config
  clk: qcom: dispcc-sm8550: Use the correct PLL configuration function
  clk: qcom: dispcc-sm8550: Update disp PLL settings
  clk: qcom: gpucc-sm8550: Update GPU PLL settings
  ...

clk: rockchip: rk3568: Mark pclk_usb as critical

2023-12-05T09:45:55+00:00

In the reference manual under "2.8.6 NIU Clock gating reliance"
it is stated that pclk_usb_niu has a dependency on hclk_usb_niu.

While the manual does not state that this is a bi-directional
relationship it was noted that the sdmmc2 failed to operate for me in
mmc mode if the pclk_usb was not marked as critical. The parent clock
of the hclk_sdmmc2 is hclk_usb.

Signed-off-by: Chris Morgan 
Link: https://lore.kernel.org/r/20231204185719.569021-8-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner

clk: rockchip: rk3568: Add PLL rate for 126.4MHz

2023-12-05T09:43:42+00:00

Add support for a PLL rate of 126.4MHz so that the Powkiddy X55 panel
can run at a requested 60hz.

I have confirmed this rate fits with all the constraints
listed in the TRM for the VPLL (as an integer PLL) in Part 1 "Chapter
2 Clock & Reset Unit (CRU)."

Signed-off-by: Chris Morgan 
Link: https://lore.kernel.org/r/20231204185719.569021-9-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner

clk: rockchip: rk3128: Fix SCLK_SDMMC's clock name

2023-11-28T09:30:59+00:00

SCLK_SDMMC is the parent for SCLK_SDMMC_DRV and SCLK_SDMMC_SAMPLE, but
used with the (more) correct name sclk_sdmmc. SD card tuning does currently
fail as the parent can't be found under that name.
There is no need to suffix the name with '0' since RK312x SoCs do have a
single sdmmc controller - so rename it to the name which is already used
by it's children.

Fixes: f6022e88faca ("clk: rockchip: add clock controller for rk3128")
Signed-off-by: Alex Bee 
Link: https://lore.kernel.org/r/20231127181415.11735-6-knaerzche@gmail.com
Signed-off-by: Heiko Stuebner

clk: rockchip: rk3128: Fix aclk_peri_src's parent

2023-11-28T09:30:58+00:00

According to the TRM there are no specific gpll_peri, cpll_peri,
gpll_div2_peri or gpll_div3_peri gates, but a single clk_peri_src gate.
Instead mux_clk_peri_src directly connects to the plls respectively the pll
divider clocks.
Fix this by creating a single gated composite.

Also rename all occurrences of aclk_peri_src to clk_peri_src, since it
is the parent for peri aclks, pclks and hclks. That name also matches
the one used in the TRM.

Fixes: f6022e88faca ("clk: rockchip: add clock controller for rk3128")
Signed-off-by: Finley Xiao 
[renamed aclk_peri_src -> clk_peri_src and added commit message]
Signed-off-by: Alex Bee 
Link: https://lore.kernel.org/r/20231127181415.11735-4-knaerzche@gmail.com
Signed-off-by: Heiko Stuebner

clk: rockchip: rk3128: Fix HCLK_OTG gate register

2023-11-16T20:26:43+00:00

The HCLK_OTG gate control is in CRU_CLKGATE5_CON, not CRU_CLKGATE3_CON.

Signed-off-by: Weihao Li 
Link: https://lore.kernel.org/r/20231031111816.8777-1-cn.liweihao@gmail.com
Signed-off-by: Heiko Stuebner

clk: rockchip: rk3568: Add PLL rate for 292.5MHz

2023-11-16T20:26:06+00:00

Add support for a PLL rate of 292.5MHz so that the Powkiddy RGB30 panel
can run at a requested 60hz (59.96, close enough).

I have confirmed this rate fits with all the constraints
listed in the TRM for the VPLL (as an integer PLL) in Part 1 "Chapter
2 Clock & Reset Unit (CRU)."

Signed-off-by: Chris Morgan 
Link: https://lore.kernel.org/r/20231018153357.343142-2-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner

clk: rockchip: rk3568: Add PLL rate for 115.2MHz

2023-11-16T20:25:55+00:00

Add support for a PLL rate of 115.2MHz so that the Powkiddy RK2023 panel
can run at a requested 60hz (59.99, close enough).

I have confirmed this rate fits with all the constraints
listed in the TRM for the VPLL (as an integer PLL) in Part 1 "Chapter
2 Clock & Reset Unit (CRU)."

Signed-off-by: Chris Morgan 
Link: https://lore.kernel.org/r/20231018161848.346947-4-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner

clk: Use device_get_match_data()

2023-10-24T03:16:21+00:00

Use preferred device_get_match_data() instead of of_match_device() to
get the driver match data. With this, adjust the includes to explicitly
include the correct headers.

Signed-off-by: Rob Herring 
Link: https://lore.kernel.org/r/20231006213959.334439-1-robh@kernel.org
Reviewed-by: Dmitry Baryshkov  #msm part
Acked-by: Krzysztof Kozlowski  # Samsung
Acked-by: David Lechner 
Acked-by: Chanwoo Choi 
Acked-by: Charles Keepax 
Reviewed-by: Bjorn Andersson 
Signed-off-by: Stephen Boyd

Merge branches 'clk-versa', 'clk-strdup', 'clk-amlogic', 'clk-allwinner' and 'clk-rockchip' into clk-next

2023-08-30T21:38:19+00:00

 - Add Versa3 clk generator to support 48KHz playback/record with audio
   codec on RZ/G2L SMARC EVK
 - Introduce kstrdup_and_replace() and use it

* clk-versa:
  clk: vc7: Use i2c_get_match_data() instead of device_get_match_data()
  clk: vc5: Use i2c_get_match_data() instead of device_get_match_data()
  clk: versaclock3: Switch to use i2c_driver's probe callback
  clk: Add support for versa3 clock driver
  dt-bindings: clock: Add Renesas versa3 clock generator bindings

* clk-strdup:
  clk: ti: Replace kstrdup() + strreplace() with kstrdup_and_replace()
  clk: tegra: Replace kstrdup() + strreplace() with kstrdup_and_replace()
  driver core: Replace kstrdup() + strreplace() with kstrdup_and_replace()
  lib/string_helpers: Add kstrdup_and_replace() helper

* clk-amlogic: (22 commits)
  dt-bindings: soc: amlogic: document System Control registers
  dt-bindings: clock: amlogic: convert amlogic,gxbb-aoclkc.txt to dt-schema
  dt-bindings: clock: amlogic: convert amlogic,gxbb-clkc.txt to dt-schema
  clk: meson: axg-audio: move bindings include to main driver
  clk: meson: meson8b: move bindings include to main driver
  clk: meson: a1: move bindings include to main driver
  clk: meson: eeclk: move bindings include to main driver
  clk: meson: aoclk: move bindings include to main driver
  dt-bindings: clk: axg-audio-clkc: expose all clock ids
  dt-bindings: clk: amlogic,a1-pll-clkc: expose all clock ids
  dt-bindings: clk: amlogic,a1-peripherals-clkc: expose all clock ids
  dt-bindings: clk: meson8b-clkc: expose all clock ids
  dt-bindings: clk: g12a-aoclkc: expose all clock ids
  dt-bindings: clk: g12a-clks: expose all clock ids
  dt-bindings: clk: axg-clkc: expose all clock ids
  dt-bindings: clk: gxbb-clkc: expose all clock ids
  clk: meson: migrate axg-audio out of hw_onecell_data to drop NR_CLKS
  clk: meson: migrate meson8b out of hw_onecell_data to drop NR_CLKS
  clk: meson: migrate a1 clock drivers out of hw_onecell_data to drop NR_CLKS
  clk: meson: migrate meson-aoclk out of hw_onecell_data to drop NR_CLKS
  ...

* clk-allwinner:
  clk: sunxi-ng: nkm: Prefer current parent rate
  clk: sunxi-ng: a64: select closest rate for pll-video0
  clk: sunxi-ng: div: Support finding closest rate
  clk: sunxi-ng: mux: Support finding closest rate
  clk: sunxi-ng: nkm: Support finding closest rate
  clk: sunxi-ng: nm: Support finding closest rate
  clk: sunxi-ng: Add helper function to find closest rate
  clk: sunxi-ng: Add feature to find closest rate
  clk: sunxi-ng: a64: allow pll-mipi to set parent's rate
  clk: sunxi-ng: nkm: consider alternative parent rates when determining rate
  clk: sunxi-ng: nkm: Use correct parameter name for parent HW
  clk: sunxi-ng: Modify mismatched function name
  clk: sunxi: sun9i-mmc: Use devm_platform_get_and_ioremap_resource()

* clk-rockchip:
  clk: rockchip: rv1126: Add PD_VO clock tree
  clk: rockchip: rk3568: Fix PLL rate setting for 78.75MHz
  clk: rockchip: rk3568: Add PLL rate for 101MHz