- Add Versa3 clk generator to support 48KHz playback/record with audio codec on RZ/G2L SMARC EVK - Introduce kstrdup_and_replace() and use it * clk-versa: clk: vc7: Use i2c_get_match_data() instead of device_get_match_data() clk: vc5: Use i2c_get_match_data() instead of device_get_match_data() clk: versaclock3: Switch to use i2c_driver's probe callback clk: Add support for versa3 clock driver dt-bindings: clock: Add Renesas versa3 clock generator bindings * clk-strdup: clk: ti: Replace kstrdup() + strreplace() with kstrdup_and_replace() clk: tegra: Replace kstrdup() + strreplace() with kstrdup_and_replace() driver core: Replace kstrdup() + strreplace() with kstrdup_and_replace() lib/string_helpers: Add kstrdup_and_replace() helper * clk-amlogic: (22 commits) dt-bindings: soc: amlogic: document System Control registers dt-bindings: clock: amlogic: convert amlogic,gxbb-aoclkc.txt to dt-schema dt-bindings: clock: amlogic: convert amlogic,gxbb-clkc.txt to dt-schema clk: meson: axg-audio: move bindings include to main driver clk: meson: meson8b: move bindings include to main driver clk: meson: a1: move bindings include to main driver clk: meson: eeclk: move bindings include to main driver clk: meson: aoclk: move bindings include to main driver dt-bindings: clk: axg-audio-clkc: expose all clock ids dt-bindings: clk: amlogic,a1-pll-clkc: expose all clock ids dt-bindings: clk: amlogic,a1-peripherals-clkc: expose all clock ids dt-bindings: clk: meson8b-clkc: expose all clock ids dt-bindings: clk: g12a-aoclkc: expose all clock ids dt-bindings: clk: g12a-clks: expose all clock ids dt-bindings: clk: axg-clkc: expose all clock ids dt-bindings: clk: gxbb-clkc: expose all clock ids clk: meson: migrate axg-audio out of hw_onecell_data to drop NR_CLKS clk: meson: migrate meson8b out of hw_onecell_data to drop NR_CLKS clk: meson: migrate a1 clock drivers out of hw_onecell_data to drop NR_CLKS clk: meson: migrate meson-aoclk out of hw_onecell_data to drop NR_CLKS ... * clk-allwinner: clk: sunxi-ng: nkm: Prefer current parent rate clk: sunxi-ng: a64: select closest rate for pll-video0 clk: sunxi-ng: div: Support finding closest rate clk: sunxi-ng: mux: Support finding closest rate clk: sunxi-ng: nkm: Support finding closest rate clk: sunxi-ng: nm: Support finding closest rate clk: sunxi-ng: Add helper function to find closest rate clk: sunxi-ng: Add feature to find closest rate clk: sunxi-ng: a64: allow pll-mipi to set parent's rate clk: sunxi-ng: nkm: consider alternative parent rates when determining rate clk: sunxi-ng: nkm: Use correct parameter name for parent HW clk: sunxi-ng: Modify mismatched function name clk: sunxi: sun9i-mmc: Use devm_platform_get_and_ioremap_resource() * clk-rockchip: clk: rockchip: rv1126: Add PD_VO clock tree clk: rockchip: rk3568: Fix PLL rate setting for 78.75MHz clk: rockchip: rk3568: Add PLL rate for 101MHz
PD_VO clock tree diagram in RV1126 is connected to - BIU_VO - VOP - RGA - IEP - DSIHOST Add entire PD_VO clock tree for rv1126. Signed-off-by: Jagan Teki <jagan@edgeble.ai> Link: https://lore.kernel.org/r/20230731110012.2913742-3-jagan@edgeble.ai Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Acked-by: Dinh Nguyen <dinguyen@kernel.org> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> # samsung Acked-by: Heiko Stuebner <heiko@sntech.de> #rockchip Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # versaclock5 Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230718143156.1066339-1-robh@kernel.org Acked-by: Abel Vesa <abel.vesa@linaro.org> #imx Signed-off-by: Stephen Boyd <sboyd@kernel.org>
PLL rate on RK356x is calculated through the simple formula:
((24000000 / _refdiv) * _fbdiv) / (_postdiv1 * _postdiv2)
The PLL rate setting for 78.75MHz seems to be copied from 96MHz
so this patch fixes it and configures it properly.
Signed-off-by: Alibek Omarov <a1ba.omarov@gmail.com>
Fixes: 842f4cb72639 ("clk: rockchip: Add more PLL rates for rk3568")
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20230614134750.1056293-1-a1ba.omarov@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This patch adds PLL setting for not so common resolution as 1920x720-50.00, which can be set using 2500 horizontal signals and 808 vertical. Signed-off-by: Alibek Omarov <a1ba.omarov@gmail.com> Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> Link: https://lore.kernel.org/r/20230614134716.1055862-1-a1ba.omarov@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
* clk-of: clk: add missing of_node_put() in "assigned-clocks" property parsing * clk-samsung: clk: samsung: exynos850: Make PMU_ALIVE_PCLK critical clk: samsung: Convert to platform remove callback returning void clk: samsung: exynos5433: Extract PM support to common ARM64 layer clk: samsung: Extract parent clock enabling to common function clk: samsung: Extract clocks registration to common function clk: samsung: exynos850: Add AUD and HSI main gate clocks clk: samsung: exynos850: Implement CMU_G3D domain clk: samsung: clk-pll: Implement pll0818x PLL type clk: samsung: Set dev in samsung_clk_init() clk: samsung: Don't pass reg_base to samsung_clk_register_pll() clk: samsung: Remove np argument from samsung_clk_init() dt-bindings: clock: exynos850: Add AUD and HSI main gate clocks dt-bindings: clock: exynos850: Add Exynos850 CMU_G3D * clk-rockchip: clk: rockchip: rk3588: make gate linked clocks critical clk: rockchip: rk3399: allow clk_cifout to force clk_cifout_src to reparent * clk-qcom: (57 commits) clk: qcom: gcc-sc8280xp: Add EMAC GDSCs clk: qcom: dispcc-qcm2290: Remove inexistent DSI1PHY clk clk: qcom: add the GPUCC driver for sa8775p dt-bindings: clock: qcom: describe the GPUCC clock for SA8775P clk: qcom: gcc-sm8350: fix PCIe PIPE clocks handling clk: qcom: lpassaudiocc-sc7280: Add required gdsc power domain clks in lpass_cc_sc7280_desc clk: qcom: lpasscc-sc7280: Skip qdsp6ss clock registration dt-bindings: clock: qcom,sc7280-lpasscc: Add qcom,adsp-pil-mode property clk: qcom: rpm: Use managed `of_clk_add_hw_provider()` clk: qcom: Add Global Clock Controller driver for IPQ9574 dt-bindings: clock: Add ipq9574 clock and reset definitions clk: qcom: gpucc-sm6375: Configure CX_GDSC disable wait value clk: qcom: gcc-sm6115: Mark RCGs shared where applicable clk: qcom: dispcc-qcm2290: Add MDSS_CORE reset dt-bindings: clock: dispcc-qcm2290: Add MDSS_CORE reset clk: qcom: apss-ipq-pll: add support for IPQ5332 dt-bindings: clock: qcom,a53pll: add IPQ5332 compatible clk: qcom: apss-ipq-pll: refactor the driver to accommodate different PLL types dt-bindings: mailbox: qcom,apcs-kpss-global: fix SDX55 'if' match dt-bindings: mailbox: qcom,apcs-kpss-global: correct SDX55 clocks ...
RK3588 has a couple of hardware blocks called Native Interface Unit
(NIU) that gate the clocks to devices behind them. Effectively this
means that some clocks require two parent clocks being enabled.
Downstream implemented this by using a separate clock driver
("clk-link") for them, which enables the second clock using PM
framework.
In the upstream kernel we are currently missing support for the second
parent. The information about it is in the GATE_LINK() macro as
linkname, but that is not used. Thus the second parent clock is not
properly enabled. So far this did not really matter, since these clocks
are mostly required for the more advanced IP blocks, that are not yet
supported upstream. As this is about to change we need a fix. There
are three options available:
1. Properly implement support for having two parent clocks in the
clock framework.
2. Mark the affected clocks CLK_IGNORE_UNUSED, so that they are not
disabled. This wastes some power, but keeps the hack contained
within the clock driver. Going from this to the first solution
is easy once that has been implemented.
3. Enabling the extra clock in the consumer driver. This leaks some
implementation details into DT.
This patch implements the second option as an intermediate solution
until the first one is available. I used an alias for CLK_IS_CRITICAL,
so that it's easy to see which clocks are not really critical once
the clock framework supports a better way to implement this.
Tested-by: Vincent Legoll <vincent.legoll@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20230403193250.108693-2-sebastian.reichel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Now that fractional_divider clk computes mmask and nmask when needed, there is no more need to provide them explicitly anymore. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/58e1950566e40e2fbb31004baee57a164ca6a390.1680423909.git.christophe.jaillet@wanadoo.fr Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
clk_cifout is derived from clk_cifout_src through an integer divider
limited to 32. clk_cifout_src is a child of either cpll, gpll or npll
without any possibility of a divider of any sort. The default clock
parent is cpll.
Let's allow clk_cifout to ask its parent clk_cifout_src to reparent in
order to find the real closest possible rate for clk_cifout and not one
derived from cpll only.
Cc: stable@vger.kernel.org # 4.10+
Fixes: fd8bc829336a ("clk: rockchip: fix the rk3399 cifout clock")
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Link: https://lore.kernel.org/r/20221117-rk3399-cifout-set-rate-parent-v1-0-432548d04081@theobroma-systems.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
- Debugfs support for fractional divider clk * clk-spear: clk: spear: Fix SSP clock definition on SPEAr600 clk: spear: Fix CLCD clock definition on SPEAr600 * clk-fract: clk: fractional-divider: Regroup inclusions clk: fractional-divider: Show numerator and denominator in debugfs clk: fractional-divider: Split out clk_fd_get_div() helper * clk-rockchip: clk: rockchip: Fix memory leak in rockchip_clk_register_pll() clk: rockchip: add clock controller for the RK3588 clk: rockchip: add lookup table support clk: rockchip: simplify rockchip_clk_add_lookup clk: rockchip: allow additional mux options for cpu-clock frequency changes clk: rockchip: add pll type for RK3588 clk: rockchip: add register offset of the cores select parent dt-bindings: clock: add rk3588 cru bindings dt-bindings: reset: add rk3588 reset definitions dt-bindings: clock: add rk3588 clock definitions clk: rockchip: use proper crypto0 name on rk3399 * clk-imx: clk: imx: rename imx_obtain_fixed_clk_hw() to imx_get_clk_hw_by_name() clk: imx8mn: fix imx8mn_enet_phy_sels clocks list clk: imx8mn: fix imx8mn_sai2_sels clocks list clk: imx: rename video_pll1 to video_pll clk: imx: replace osc_hdmi with dummy clk: imx8mn: rename vpu_pll to m7_alt_pll clk: imx: imxrt1050: add IMXRT1050_CLK_LCDIF_PIX clock gate clk: imx: imxrt1050: fix IMXRT1050_CLK_LCDIF_APB offsets clk: imx8mp: Add audio shared gate dt-bindings: clock: imx8mp: Add ids for the audio shared gate clk: imx: pll14xx: Add 320 MHz and 640 MHz entries for PLL146x clk: imx93: keep sys ctr clock always on clk: imx: keep hsio bus clock always on clk: imx93: drop tpm1/3, lpit1/2 clk dt-bindings: clock: imx93: drop TPM1/3 LPIT1/2 entry clk: imx93: correct enet clock clk: imx93: unmap anatop base in error handling path clk: imx: imx8mp: add shared clk gate for usb suspend clk dt-bindings: clocks: imx8mp: Add ID for usb suspend clock clk: imx93: correct the flexspi1 clock setting