<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux.git/drivers/clk/qcom, branch v5.12</title>
<subtitle>Linux kernel source tree</subtitle>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/'/>
<entry>
<title>clk: qcom: camcc: Update the clock ops for the SC7180</title>
<updated>2021-03-29T21:08:32+00:00</updated>
<author>
<name>Taniya Das</name>
<email>tdas@codeaurora.org</email>
</author>
<published>2021-03-27T01:41:05+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=e5c359f70e4b5e7b6c2bf4b0ca2d2686d543a37b'/>
<id>e5c359f70e4b5e7b6c2bf4b0ca2d2686d543a37b</id>
<content type='text'>
Some of the RCGs could be always ON from the XO source and could be used
as the clock on signal for the GDSC to be operational. In the cases where
the GDSCs are parked at different source with the source clock disabled,
it could lead to the GDSC to be stuck at ON/OFF during gdsc disable/enable.
Thus park the RCGs at XO during clock disable and update the rcg_ops to
use the shared_ops.

Fixes: 15d09e830bbc ("clk: qcom: camcc: Add camera clock controller driver for SC7180")
Signed-off-by: Taniya Das &lt;tdas@codeaurora.org&gt;
Link: https://lore.kernel.org/r/1616809265-11912-1-git-send-email-tdas@codeaurora.org
Signed-off-by: Stephen Boyd &lt;sboyd@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Some of the RCGs could be always ON from the XO source and could be used
as the clock on signal for the GDSC to be operational. In the cases where
the GDSCs are parked at different source with the source clock disabled,
it could lead to the GDSC to be stuck at ON/OFF during gdsc disable/enable.
Thus park the RCGs at XO during clock disable and update the rcg_ops to
use the shared_ops.

Fixes: 15d09e830bbc ("clk: qcom: camcc: Add camera clock controller driver for SC7180")
Signed-off-by: Taniya Das &lt;tdas@codeaurora.org&gt;
Link: https://lore.kernel.org/r/1616809265-11912-1-git-send-email-tdas@codeaurora.org
Signed-off-by: Stephen Boyd &lt;sboyd@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>clk: qcom: gcc-sc7180: Use floor ops for the correct sdcc1 clk</title>
<updated>2021-03-13T21:00:05+00:00</updated>
<author>
<name>Douglas Anderson</name>
<email>dianders@chromium.org</email>
</author>
<published>2021-02-24T17:50:25+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=148ddaa89d4a0a927c4353398096cc33687755c1'/>
<id>148ddaa89d4a0a927c4353398096cc33687755c1</id>
<content type='text'>
While picking commit a8cd989e1a57 ("mmc: sdhci-msm: Warn about
overclocking SD/MMC") back to my tree I was surprised that it was
reporting warnings.  I thought I fixed those!  Looking closer at the
fix, I see that I totally bungled it (or at least I halfway bungled
it).  The SD card clock got fixed (and that was the one I was really
focused on fixing), but I totally adjusted the wrong clock for eMMC.
Sigh.  Let's fix my dumb mistake.

Now both SD and eMMC have floor for the "apps" clock.

This doesn't matter a lot for the final clock rate for HS400 eMMC but
could matter if someone happens to put some slower eMMC on a sc7180.
We also transition through some of these lower rates sometimes and
having them wrong could cause problems during these transitions.
These were the messages I was seeing at boot:
  mmc1: Card appears overclocked; req 52000000 Hz, actual 100000000 Hz
  mmc1: Card appears overclocked; req 52000000 Hz, actual 100000000 Hz
  mmc1: Card appears overclocked; req 104000000 Hz, actual 192000000 Hz

Fixes: 6d37a8d19283 ("clk: qcom: gcc-sc7180: Use floor ops for sdcc clks")
Signed-off-by: Douglas Anderson &lt;dianders@chromium.org&gt;
Link: https://lore.kernel.org/r/20210224095013.1.I2e2ba4978cfca06520dfb5d757768f9c42140f7c@changeid
Reviewed-by: Taniya Das &lt;tdas@codeaurora.org&gt;
Signed-off-by: Stephen Boyd &lt;sboyd@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
While picking commit a8cd989e1a57 ("mmc: sdhci-msm: Warn about
overclocking SD/MMC") back to my tree I was surprised that it was
reporting warnings.  I thought I fixed those!  Looking closer at the
fix, I see that I totally bungled it (or at least I halfway bungled
it).  The SD card clock got fixed (and that was the one I was really
focused on fixing), but I totally adjusted the wrong clock for eMMC.
Sigh.  Let's fix my dumb mistake.

Now both SD and eMMC have floor for the "apps" clock.

This doesn't matter a lot for the final clock rate for HS400 eMMC but
could matter if someone happens to put some slower eMMC on a sc7180.
We also transition through some of these lower rates sometimes and
having them wrong could cause problems during these transitions.
These were the messages I was seeing at boot:
  mmc1: Card appears overclocked; req 52000000 Hz, actual 100000000 Hz
  mmc1: Card appears overclocked; req 52000000 Hz, actual 100000000 Hz
  mmc1: Card appears overclocked; req 104000000 Hz, actual 192000000 Hz

Fixes: 6d37a8d19283 ("clk: qcom: gcc-sc7180: Use floor ops for sdcc clks")
Signed-off-by: Douglas Anderson &lt;dianders@chromium.org&gt;
Link: https://lore.kernel.org/r/20210224095013.1.I2e2ba4978cfca06520dfb5d757768f9c42140f7c@changeid
Reviewed-by: Taniya Das &lt;tdas@codeaurora.org&gt;
Signed-off-by: Stephen Boyd &lt;sboyd@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>clk: qcom: rcg2: Rectify clk_gfx3d rate rounding without mux division</title>
<updated>2021-03-13T20:59:46+00:00</updated>
<author>
<name>Marijn Suijten</name>
<email>marijn.suijten@somainline.org</email>
</author>
<published>2021-03-02T23:41:06+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=0ae67123eafd056cc0e27ab27b0d3c5e4bdaf916'/>
<id>0ae67123eafd056cc0e27ab27b0d3c5e4bdaf916</id>
<content type='text'>
In case the mux is not divided parent_req was mistakenly not assigned to
leading __clk_determine_rate to determine the best frequency setting for
a requested rate of 0, resulting in the msm8996 platform not booting.
Rectify this by refactoring the logic to unconditionally assign to
parent_req.rate with the clock rate the caller is expecting.

Fixes: 7cbb78a99db6 ("clk: qcom: rcg2: Stop hardcoding gfx3d pingpong parent numbers")
Reported-by: Konrad Dybcio &lt;konrad.dybcio@somainline.org&gt;
Tested-by: Konrad Dybcio &lt;konrad.dybcio@somainline.org&gt;
Reviewed-By: AngeloGioacchino Del Regno &lt;angelogioacchino.delregno@somainline.org&gt;
Signed-off-by: Marijn Suijten &lt;marijn.suijten@somainline.org&gt;
Link: https://lore.kernel.org/r/20210302234106.3418665-1-marijn.suijten@somainline.org
Signed-off-by: Stephen Boyd &lt;sboyd@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
In case the mux is not divided parent_req was mistakenly not assigned to
leading __clk_determine_rate to determine the best frequency setting for
a requested rate of 0, resulting in the msm8996 platform not booting.
Rectify this by refactoring the logic to unconditionally assign to
parent_req.rate with the clock rate the caller is expecting.

Fixes: 7cbb78a99db6 ("clk: qcom: rcg2: Stop hardcoding gfx3d pingpong parent numbers")
Reported-by: Konrad Dybcio &lt;konrad.dybcio@somainline.org&gt;
Tested-by: Konrad Dybcio &lt;konrad.dybcio@somainline.org&gt;
Reviewed-By: AngeloGioacchino Del Regno &lt;angelogioacchino.delregno@somainline.org&gt;
Signed-off-by: Marijn Suijten &lt;marijn.suijten@somainline.org&gt;
Link: https://lore.kernel.org/r/20210302234106.3418665-1-marijn.suijten@somainline.org
Signed-off-by: Stephen Boyd &lt;sboyd@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>clk: qcom: rpmh: Update the XO clock source for SC7280</title>
<updated>2021-03-13T20:58:18+00:00</updated>
<author>
<name>Taniya Das</name>
<email>tdas@codeaurora.org</email>
</author>
<published>2021-03-10T18:18:03+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=c9b86db274d229a1ab47a4e8e11fa9775fd21cbb'/>
<id>c9b86db274d229a1ab47a4e8e11fa9775fd21cbb</id>
<content type='text'>
The bi_tcxo clock source for SC7280 requires a div 4 to derive 19.2MHz
from the xo_board. Thus update the same.

Fixes: fff2b9a65162 ("clk: qcom: rpmh: Add support for RPMH clocks on SC7280")
Signed-off-by: Taniya Das &lt;tdas@codeaurora.org&gt;
Link: https://lore.kernel.org/r/1615400283-20100-1-git-send-email-tdas@codeaurora.org
Signed-off-by: Stephen Boyd &lt;sboyd@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The bi_tcxo clock source for SC7280 requires a div 4 to derive 19.2MHz
from the xo_board. Thus update the same.

Fixes: fff2b9a65162 ("clk: qcom: rpmh: Add support for RPMH clocks on SC7280")
Signed-off-by: Taniya Das &lt;tdas@codeaurora.org&gt;
Link: https://lore.kernel.org/r/1615400283-20100-1-git-send-email-tdas@codeaurora.org
Signed-off-by: Stephen Boyd &lt;sboyd@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux</title>
<updated>2021-02-22T17:45:23+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2021-02-22T17:45:23+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=28b9aaac4cc5a11485b6f70656e4e9ead590cf5b'/>
<id>28b9aaac4cc5a11485b6f70656e4e9ead590cf5b</id>
<content type='text'>
Pull clk updates from Stephen Boyd:
 "This is all driver updates, the majority of which is a bunch of new
  Qualcomm clk drivers that dominate the diffstat because we add support
  for six SoCs from that particular vendor.

  The other big change is the removal of various clk drivers that are no
  longer used now that the kernel is dropping support for those SoCs.

  Beyond that there's the usual non-critical fixes for existing drivers
  and a good number of patches from Lee Jones that cleanup a bunch of
  W=1 enabled builds.

  Removed Drivers:
   - Remove efm32 clk driver
   - Remove tango4 clk driver
   - Remove zte zx clk driver
   - Remove sirf prima2/atlast clk drivers
   - Remove u300 clk driver

  New Drivers:
   - PLL support on MStar/SigmaStar ARMv7 SoCs
   - CPU clks for Qualcomm SDX55
   - GCC and RPMh clks for Qualcomm SC8180x and SC7280 SoCs
   - GCC clks for Qualcomm SM8350
   - GPU clks for Qualcomm SDM660/SDM630

  Updates:
   - Video clk fixups on Qualcomm SM8250
   - Improvements for multimedia clks on Qualcomm MSM8998
   - Fix many warnings with W=1 enabled builds under drivers/clk/
   - Support crystal load capacitance for Versaclock VC5
   - Add a "skip recall" DT binding for Silicon Labs' si570 to avoid
     glitches at boot
   - Convert Xilinx VCU clk driver to a proper clk provider driver
   - Expose Xilinx ZynqMP clk driver to more platforms
   - Amlogic pll driver fixup
   - Amlogic meson8b clock controller dt support clean up
   - Remove mipi clk from the Amlogic axg clock controller
   - New Rockchip rk3368 clock ids related to camera input
   - Use pr_notice() instead of pr_warn() on i.MX6Q pre-boot ldb_di_clk
     reparenting
   - A series from Liu Ying that adds some SCU clocks support for
     i.MX8qxp DC0/MIPI-LVDS subsystems
   - A series from Lucas Stach that adds PLL monitor clocks for i.MX8MQ,
     and clkout1/2 support for i.MX8MM/MN
   - Add I2c and Ethernet (RAVB) clocks on Renesas R-Car V3U
   - Add timer (TMU) clocks on most Renesas R-Car Gen3 SoCs
   - Add video-related (FCPVD/VSPD/VSPX), watchdog (RWDT), serial
     (HSCIF), pincontrol/GPIO (PFC/GPIO), SPI (MSIOF), SDHI, and DMA
     (SYS-DMAC) clocks on Renesas R-Car V3U
   - Add support for the USB 2.0 clock selector on Renesas RZ/G2 SoCs
   - Allwinner H616 SoC clk support"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (171 commits)
  clk: mstar: msc313-mpll: Fix format specifier
  clk: mstar: Allow MStar clk drivers to be compile tested
  clk: qoriq: use macros to generate pll_mask
  clk: qcom: Add Global Clock controller (GCC) driver for SC7280
  dt-bindings: clock: Add SC7280 GCC clock binding
  clk: qcom: rpmh: Add support for RPMH clocks on SC7280
  dt-bindings: clock: Add RPMHCC bindings for SC7280
  clk: qcom: gcc-sm8350: add gdsc
  dt-bindings: clock: Add QCOM SDM630 and SDM660 graphics clock bindings
  clk: qcom: Add SDM660 GPU Clock Controller (GPUCC) driver
  clk: qcom: mmcc-msm8996: Migrate gfx3d clock to clk_rcg2_gfx3d
  clk: qcom: rcg2: Stop hardcoding gfx3d pingpong parent numbers
  dt-bindings: clock: Add support for the SDM630 and SDM660 mmcc
  clk: qcom: Add SDM660 Multimedia Clock Controller (MMCC) driver
  clk: qcom: gcc-sdm660: Mark GPU CFG AHB clock as critical
  clk: qcom: gcc-sdm660: Mark MMSS NoC CFG AHB clock as critical
  clk: qcom: gpucc-msm8998: Allow fabia gpupll0 rate setting
  clk: qcom: gpucc-msm8998: Add resets, cxc, fix flags on gpu_gx_gdsc
  clk: qcom: gdsc: Implement NO_RET_PERIPH flag
  clk: mstar: MStar/SigmaStar MPLL driver
  ...
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull clk updates from Stephen Boyd:
 "This is all driver updates, the majority of which is a bunch of new
  Qualcomm clk drivers that dominate the diffstat because we add support
  for six SoCs from that particular vendor.

  The other big change is the removal of various clk drivers that are no
  longer used now that the kernel is dropping support for those SoCs.

  Beyond that there's the usual non-critical fixes for existing drivers
  and a good number of patches from Lee Jones that cleanup a bunch of
  W=1 enabled builds.

  Removed Drivers:
   - Remove efm32 clk driver
   - Remove tango4 clk driver
   - Remove zte zx clk driver
   - Remove sirf prima2/atlast clk drivers
   - Remove u300 clk driver

  New Drivers:
   - PLL support on MStar/SigmaStar ARMv7 SoCs
   - CPU clks for Qualcomm SDX55
   - GCC and RPMh clks for Qualcomm SC8180x and SC7280 SoCs
   - GCC clks for Qualcomm SM8350
   - GPU clks for Qualcomm SDM660/SDM630

  Updates:
   - Video clk fixups on Qualcomm SM8250
   - Improvements for multimedia clks on Qualcomm MSM8998
   - Fix many warnings with W=1 enabled builds under drivers/clk/
   - Support crystal load capacitance for Versaclock VC5
   - Add a "skip recall" DT binding for Silicon Labs' si570 to avoid
     glitches at boot
   - Convert Xilinx VCU clk driver to a proper clk provider driver
   - Expose Xilinx ZynqMP clk driver to more platforms
   - Amlogic pll driver fixup
   - Amlogic meson8b clock controller dt support clean up
   - Remove mipi clk from the Amlogic axg clock controller
   - New Rockchip rk3368 clock ids related to camera input
   - Use pr_notice() instead of pr_warn() on i.MX6Q pre-boot ldb_di_clk
     reparenting
   - A series from Liu Ying that adds some SCU clocks support for
     i.MX8qxp DC0/MIPI-LVDS subsystems
   - A series from Lucas Stach that adds PLL monitor clocks for i.MX8MQ,
     and clkout1/2 support for i.MX8MM/MN
   - Add I2c and Ethernet (RAVB) clocks on Renesas R-Car V3U
   - Add timer (TMU) clocks on most Renesas R-Car Gen3 SoCs
   - Add video-related (FCPVD/VSPD/VSPX), watchdog (RWDT), serial
     (HSCIF), pincontrol/GPIO (PFC/GPIO), SPI (MSIOF), SDHI, and DMA
     (SYS-DMAC) clocks on Renesas R-Car V3U
   - Add support for the USB 2.0 clock selector on Renesas RZ/G2 SoCs
   - Allwinner H616 SoC clk support"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (171 commits)
  clk: mstar: msc313-mpll: Fix format specifier
  clk: mstar: Allow MStar clk drivers to be compile tested
  clk: qoriq: use macros to generate pll_mask
  clk: qcom: Add Global Clock controller (GCC) driver for SC7280
  dt-bindings: clock: Add SC7280 GCC clock binding
  clk: qcom: rpmh: Add support for RPMH clocks on SC7280
  dt-bindings: clock: Add RPMHCC bindings for SC7280
  clk: qcom: gcc-sm8350: add gdsc
  dt-bindings: clock: Add QCOM SDM630 and SDM660 graphics clock bindings
  clk: qcom: Add SDM660 GPU Clock Controller (GPUCC) driver
  clk: qcom: mmcc-msm8996: Migrate gfx3d clock to clk_rcg2_gfx3d
  clk: qcom: rcg2: Stop hardcoding gfx3d pingpong parent numbers
  dt-bindings: clock: Add support for the SDM630 and SDM660 mmcc
  clk: qcom: Add SDM660 Multimedia Clock Controller (MMCC) driver
  clk: qcom: gcc-sdm660: Mark GPU CFG AHB clock as critical
  clk: qcom: gcc-sdm660: Mark MMSS NoC CFG AHB clock as critical
  clk: qcom: gpucc-msm8998: Allow fabia gpupll0 rate setting
  clk: qcom: gpucc-msm8998: Add resets, cxc, fix flags on gpu_gx_gdsc
  clk: qcom: gdsc: Implement NO_RET_PERIPH flag
  clk: mstar: MStar/SigmaStar MPLL driver
  ...
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge branches 'clk-socfpga', 'clk-mstar', 'clk-qcom' and 'clk-warnings' into clk-next</title>
<updated>2021-02-16T22:09:24+00:00</updated>
<author>
<name>Stephen Boyd</name>
<email>sboyd@kernel.org</email>
</author>
<published>2021-02-16T22:09:24+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=4d5c4ae32945ac86cf68740a2236205b333d5a66'/>
<id>4d5c4ae32945ac86cf68740a2236205b333d5a66</id>
<content type='text'>
 - PLL support on MStar/SigmaStar ARMv7 SoCs
 - CPU clks for Qualcomm SDX55
 - GCC and RPMh clks for Qualcomm SC8180x and SC7280 SoCs
 - GCC clks for Qualcomm SM8350
 - Video clk fixups on Qualcomm SM8250
 - GPU clks for Qualcomm SDM660/SDM630
 - Improvements for multimedia clks on Qualcomm MSM8998
 - Fix many warnings with W=1 enabled builds under drivers/clk/

* clk-socfpga:
  clk: socfpga: agilex: add clock driver for eASIC N5X platform
  dt-bindings: documentation: add clock bindings information for eASIC N5X

* clk-mstar:
  clk: mstar: msc313-mpll: Fix format specifier
  clk: mstar: Allow MStar clk drivers to be compile tested
  clk: mstar: MStar/SigmaStar MPLL driver
  clk: fixed: add devm helper for clk_hw_register_fixed_factor()
  dt-bindings: clk: mstar msc313 mpll binding description
  dt-bindings: clk: mstar msc313 mpll binding header

* clk-qcom: (42 commits)
  clk: qcom: Add Global Clock controller (GCC) driver for SC7280
  dt-bindings: clock: Add SC7280 GCC clock binding
  clk: qcom: rpmh: Add support for RPMH clocks on SC7280
  dt-bindings: clock: Add RPMHCC bindings for SC7280
  clk: qcom: gcc-sm8350: add gdsc
  dt-bindings: clock: Add QCOM SDM630 and SDM660 graphics clock bindings
  clk: qcom: Add SDM660 GPU Clock Controller (GPUCC) driver
  clk: qcom: mmcc-msm8996: Migrate gfx3d clock to clk_rcg2_gfx3d
  clk: qcom: rcg2: Stop hardcoding gfx3d pingpong parent numbers
  dt-bindings: clock: Add support for the SDM630 and SDM660 mmcc
  clk: qcom: Add SDM660 Multimedia Clock Controller (MMCC) driver
  clk: qcom: gcc-sdm660: Mark GPU CFG AHB clock as critical
  clk: qcom: gcc-sdm660: Mark MMSS NoC CFG AHB clock as critical
  clk: qcom: gpucc-msm8998: Allow fabia gpupll0 rate setting
  clk: qcom: gpucc-msm8998: Add resets, cxc, fix flags on gpu_gx_gdsc
  clk: qcom: gdsc: Implement NO_RET_PERIPH flag
  clk: qcom: mmcc-msm8998: Set bimc_smmu_gdsc always on
  clk: qcom: mmcc-msm8998: Add hardware clockgating registers to some clks
  clk: qcom: gcc-msm8998: Fix Alpha PLL type for all GPLLs
  clk: qcom: gcc-msm8998: Mark gpu_cfg_ahb_clk as critical
  ...

* clk-warnings: (27 commits)
  clk: zynq: clkc: Remove various instances of an unused variable 'clk'
  clk: versatile: clk-icst: Fix worthy struct documentation block
  clk: ti: gate: Fix possible doc-rot in 'omap36xx_gate_clk_enable_with_hsdiv_restore'
  clk: ti: dpll: Fix misnaming of '_register_dpll()'s 'user' parameter
  clk: ti: clockdomain: Fix description for 'omap2_init_clk_clkdm's hw param
  clk: st: clkgen-fsyn: Fix worthy struct documentation demote partially filled one
  clk: st: clkgen-pll: Demote unpopulated kernel-doc header
  clk: mvebu: ap-cpu-clk: Demote non-conformant kernel-doc header
  clk: socfpga: clk-pll-a10: Remove set but unused variable 'rc'
  clk: socfpga: clk-pll: Remove unused variable 'rc'
  clk: sifive: fu540-prci: Declare static const variable 'prci_clk_fu540' where it's used
  clk: bcm: clk-iproc-pll: Demote kernel-doc abuse
  clk: zynqmp: divider: Add missing description for 'max_div'
  clk: spear: Move prototype to accessible header
  clk: qcom: clk-rpm: Remove a bunch of superfluous code
  clk: clk-xgene: Add description for 'mask' and fix formatting for 'flags'
  clk: qcom: mmcc-msm8974: Remove unused static const tables 'mmcc_xo_mmpll0_1_2_gpll0{map}'
  clk: clk-npcm7xx: Remove unused static const tables 'npcm7xx_gates' and 'npcm7xx_divs_fx'
  clk: clk-fixed-mmio: Demote obvious kernel-doc abuse
  clk: qcom: gcc-ipq4019: Remove unused variable 'ret'
  ...
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
 - PLL support on MStar/SigmaStar ARMv7 SoCs
 - CPU clks for Qualcomm SDX55
 - GCC and RPMh clks for Qualcomm SC8180x and SC7280 SoCs
 - GCC clks for Qualcomm SM8350
 - Video clk fixups on Qualcomm SM8250
 - GPU clks for Qualcomm SDM660/SDM630
 - Improvements for multimedia clks on Qualcomm MSM8998
 - Fix many warnings with W=1 enabled builds under drivers/clk/

* clk-socfpga:
  clk: socfpga: agilex: add clock driver for eASIC N5X platform
  dt-bindings: documentation: add clock bindings information for eASIC N5X

* clk-mstar:
  clk: mstar: msc313-mpll: Fix format specifier
  clk: mstar: Allow MStar clk drivers to be compile tested
  clk: mstar: MStar/SigmaStar MPLL driver
  clk: fixed: add devm helper for clk_hw_register_fixed_factor()
  dt-bindings: clk: mstar msc313 mpll binding description
  dt-bindings: clk: mstar msc313 mpll binding header

* clk-qcom: (42 commits)
  clk: qcom: Add Global Clock controller (GCC) driver for SC7280
  dt-bindings: clock: Add SC7280 GCC clock binding
  clk: qcom: rpmh: Add support for RPMH clocks on SC7280
  dt-bindings: clock: Add RPMHCC bindings for SC7280
  clk: qcom: gcc-sm8350: add gdsc
  dt-bindings: clock: Add QCOM SDM630 and SDM660 graphics clock bindings
  clk: qcom: Add SDM660 GPU Clock Controller (GPUCC) driver
  clk: qcom: mmcc-msm8996: Migrate gfx3d clock to clk_rcg2_gfx3d
  clk: qcom: rcg2: Stop hardcoding gfx3d pingpong parent numbers
  dt-bindings: clock: Add support for the SDM630 and SDM660 mmcc
  clk: qcom: Add SDM660 Multimedia Clock Controller (MMCC) driver
  clk: qcom: gcc-sdm660: Mark GPU CFG AHB clock as critical
  clk: qcom: gcc-sdm660: Mark MMSS NoC CFG AHB clock as critical
  clk: qcom: gpucc-msm8998: Allow fabia gpupll0 rate setting
  clk: qcom: gpucc-msm8998: Add resets, cxc, fix flags on gpu_gx_gdsc
  clk: qcom: gdsc: Implement NO_RET_PERIPH flag
  clk: qcom: mmcc-msm8998: Set bimc_smmu_gdsc always on
  clk: qcom: mmcc-msm8998: Add hardware clockgating registers to some clks
  clk: qcom: gcc-msm8998: Fix Alpha PLL type for all GPLLs
  clk: qcom: gcc-msm8998: Mark gpu_cfg_ahb_clk as critical
  ...

* clk-warnings: (27 commits)
  clk: zynq: clkc: Remove various instances of an unused variable 'clk'
  clk: versatile: clk-icst: Fix worthy struct documentation block
  clk: ti: gate: Fix possible doc-rot in 'omap36xx_gate_clk_enable_with_hsdiv_restore'
  clk: ti: dpll: Fix misnaming of '_register_dpll()'s 'user' parameter
  clk: ti: clockdomain: Fix description for 'omap2_init_clk_clkdm's hw param
  clk: st: clkgen-fsyn: Fix worthy struct documentation demote partially filled one
  clk: st: clkgen-pll: Demote unpopulated kernel-doc header
  clk: mvebu: ap-cpu-clk: Demote non-conformant kernel-doc header
  clk: socfpga: clk-pll-a10: Remove set but unused variable 'rc'
  clk: socfpga: clk-pll: Remove unused variable 'rc'
  clk: sifive: fu540-prci: Declare static const variable 'prci_clk_fu540' where it's used
  clk: bcm: clk-iproc-pll: Demote kernel-doc abuse
  clk: zynqmp: divider: Add missing description for 'max_div'
  clk: spear: Move prototype to accessible header
  clk: qcom: clk-rpm: Remove a bunch of superfluous code
  clk: clk-xgene: Add description for 'mask' and fix formatting for 'flags'
  clk: qcom: mmcc-msm8974: Remove unused static const tables 'mmcc_xo_mmpll0_1_2_gpll0{map}'
  clk: clk-npcm7xx: Remove unused static const tables 'npcm7xx_gates' and 'npcm7xx_divs_fx'
  clk: clk-fixed-mmio: Demote obvious kernel-doc abuse
  clk: qcom: gcc-ipq4019: Remove unused variable 'ret'
  ...
</pre>
</div>
</content>
</entry>
<entry>
<title>clk: qcom: Add Global Clock controller (GCC) driver for SC7280</title>
<updated>2021-02-14T20:56:55+00:00</updated>
<author>
<name>Taniya Das</name>
<email>tdas@codeaurora.org</email>
</author>
<published>2021-02-10T18:26:19+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=a3cc092196ef63570c8744c3ac88c3c6c67ab44b'/>
<id>a3cc092196ef63570c8744c3ac88c3c6c67ab44b</id>
<content type='text'>
Add support for the global clock controller found on SC7280
based devices. This should allow most non-multimedia device
drivers to probe and control their clocks.

Signed-off-by: Taniya Das &lt;tdas@codeaurora.org&gt;
Link: https://lore.kernel.org/r/1612981579-17391-3-git-send-email-tdas@codeaurora.org
Signed-off-by: Stephen Boyd &lt;sboyd@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Add support for the global clock controller found on SC7280
based devices. This should allow most non-multimedia device
drivers to probe and control their clocks.

Signed-off-by: Taniya Das &lt;tdas@codeaurora.org&gt;
Link: https://lore.kernel.org/r/1612981579-17391-3-git-send-email-tdas@codeaurora.org
Signed-off-by: Stephen Boyd &lt;sboyd@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>clk: qcom: rpmh: Add support for RPMH clocks on SC7280</title>
<updated>2021-02-14T20:56:55+00:00</updated>
<author>
<name>Taniya Das</name>
<email>tdas@codeaurora.org</email>
</author>
<published>2021-02-10T17:13:50+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=fff2b9a651621f2979ca12c8206c74e3e07a6e31'/>
<id>fff2b9a651621f2979ca12c8206c74e3e07a6e31</id>
<content type='text'>
Add support for RPMH clocks on SC7280 SoCs.

Signed-off-by: Taniya Das &lt;tdas@codeaurora.org&gt;
Link: https://lore.kernel.org/r/1612977230-11566-3-git-send-email-tdas@codeaurora.org
Signed-off-by: Stephen Boyd &lt;sboyd@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Add support for RPMH clocks on SC7280 SoCs.

Signed-off-by: Taniya Das &lt;tdas@codeaurora.org&gt;
Link: https://lore.kernel.org/r/1612977230-11566-3-git-send-email-tdas@codeaurora.org
Signed-off-by: Stephen Boyd &lt;sboyd@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>clk: qcom: gcc-sm8350: add gdsc</title>
<updated>2021-02-14T20:56:55+00:00</updated>
<author>
<name>Vinod Koul</name>
<email>vkoul@kernel.org</email>
</author>
<published>2021-02-10T16:16:49+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=3fade948fbb3ccd30f6b06c474d0d084dffecb64'/>
<id>3fade948fbb3ccd30f6b06c474d0d084dffecb64</id>
<content type='text'>
Add the GDSC found in GCC for SM8350 SoC

Signed-off-by: Vinod Koul &lt;vkoul@kernel.org&gt;
Link: https://lore.kernel.org/r/20210210161649.431741-1-vkoul@kernel.org
Signed-off-by: Stephen Boyd &lt;sboyd@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Add the GDSC found in GCC for SM8350 SoC

Signed-off-by: Vinod Koul &lt;vkoul@kernel.org&gt;
Link: https://lore.kernel.org/r/20210210161649.431741-1-vkoul@kernel.org
Signed-off-by: Stephen Boyd &lt;sboyd@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>clk: qcom: Add SDM660 GPU Clock Controller (GPUCC) driver</title>
<updated>2021-02-14T20:56:54+00:00</updated>
<author>
<name>AngeloGioacchino Del Regno</name>
<email>angelogioacchino.delregno@somainline.org</email>
</author>
<published>2021-01-13T18:38:16+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=79b5d1fc93a1f114a0974a076b5a25ca64b37b0f'/>
<id>79b5d1fc93a1f114a0974a076b5a25ca64b37b0f</id>
<content type='text'>
The GPUCC manages the clocks for the Adreno GPU found on the
SDM630, SDM636, SDM660 SoCs.

Signed-off-by: AngeloGioacchino Del Regno &lt;angelogioacchino.delregno@somainline.org&gt;
Link: https://lore.kernel.org/r/20210113183817.447866-9-angelogioacchino.delregno@somainline.org
Signed-off-by: Stephen Boyd &lt;sboyd@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The GPUCC manages the clocks for the Adreno GPU found on the
SDM630, SDM636, SDM660 SoCs.

Signed-off-by: AngeloGioacchino Del Regno &lt;angelogioacchino.delregno@somainline.org&gt;
Link: https://lore.kernel.org/r/20210113183817.447866-9-angelogioacchino.delregno@somainline.org
Signed-off-by: Stephen Boyd &lt;sboyd@kernel.org&gt;
</pre>
</div>
</content>
</entry>
</feed>
