linux.git/drivers/clk/nxp, branch v4.5

clk: lpc32xx: add common clock framework driver

2015-12-24T20:31:26+00:00

Add support for all configurable clocks found on NXP LPC32xx SoC.

The list contains several heterogenous groups of clocks:
* system clocks including multiple dividers and muxes,
* x397 PLL, HCLK PLL and USB PLL,
* peripheral clocks inherited from rtc, hclk and pclk,
* USB controller clocks: AHB slave, I2C, OTG, OHCI and device.

Signed-off-by: Vladimir Zapolskiy 
Signed-off-by: Michael Turquette

clk: lpc18xx-cgu: fix potential system hang when disabling unused clocks

2015-10-26T19:36:58+00:00

The clock consumer (CCU) of the CGU must be able to check if a CGU
base clock is really running since access to the CCU registers
requires a running base clock. Access with a disabled base clock will
cause the system to hang. Fix this issue by adding code that check if
the parent clock is running in the is_enabled clk_ops callback. Since
certain clocks can be cascaded this must be added to all clock gates.

The hang would occur if the boot ROM or boot loader didn't setup and
enable the USB0 clock. Then when the clk framework tried to access
the CCU register it would hang the system.

Signed-off-by: Joachim Eastwood 
Signed-off-by: Stephen Boyd

clk: lpc18xx-ccu: fix potential system hang when disabling unused clocks

2015-10-26T19:36:56+00:00

CCU branch clock register must only be accessed while the base
(parent) clock is running. Access with a disabled base clock
will cause the system to hang. Fix this issue by adding code
that check if the parent clock is running in the is_enabled
clk_ops callback.

This hang would occur when disabling unused clocks after AMBA
runtime pm had already disabled some of the clocks.

Signed-off-by: Joachim Eastwood 
Signed-off-by: Stephen Boyd

clk: nxp: Remove clk.h include

2015-07-20T18:11:08+00:00

Clock provider drivers generally shouldn't include clk.h because
it's the consumer API. Remove the include here because this is a
provider driver.

Acked-by: Joachim Eastwood 
Signed-off-by: Stephen Boyd

clk: add lpc18xx ccu clk driver

2015-06-18T22:44:48+00:00

Add driver for NXP LPC18xx/43xx Clock Control Unit (CCU). The CCU
provides fine grained gating of most clocks present in the SoC.

Signed-off-by: Joachim Eastwood 
Signed-off-by: Michael Turquette

clk: add lpc18xx cgu clk driver

2015-06-18T22:44:47+00:00

Add driver for NXP LPC18xx/43xx Clock Generation Unit (CGU). The CGU
contains several clock generators and output stages that route the
clocks either directly to peripherals or to a Clock Control Unit
(CCU).

Signed-off-by: Joachim Eastwood 
Signed-off-by: Michael Turquette