linux.git/drivers/clk/meson, branch v4.18

clk: meson: audio-divider is one based

2018-06-21T08:10:50+00:00

The audio divider is one based. This offset was mistakenly dropped from
recalc_rate() when migrating to clk_regmap.

Fixes: 88a4e1283681 ("clk: meson: migrate the audio divider clock to clk_regmap")
Acked-by: Neil Armstrong 
Signed-off-by: Jerome Brunet

clk: meson-gxbb: set fclk_div2 as CLK_IS_CRITICAL

2018-06-19T15:20:11+00:00

On Amlogic Meson GXBB & GXL platforms, the SCPI Cortex-M4 Co-Processor
seems to be dependent on the FCLK_DIV2 to be operationnal.

The issue occurred since v4.17-rc1 by freezing the kernel boot when
the 'schedutil' cpufreq governor was selected as default :

  [   12.071837] scpi_protocol scpi: SCP Protocol 0.0 Firmware 0.0.0 version
  domain-0 init dvfs: 4
  [   12.087757] hctosys: unable to open rtc device (rtc0)
  [   12.087907] cfg80211: Loading compiled-in X.509 certificates for regulatory database
  [   12.102241] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'

But when disabling the MMC driver, the boot finished but cpufreq failed to
change the CPU frequency :

  [   12.153045] cpufreq: __target_index: Failed to change cpu frequency: -5

A bisect between v4.16 and v4.16-rc1 gave
05f814402d61 ("clk: meson: add fdiv clock gates") to be the first bad commit.
This commit added support for the missing clock gates before the fixed PLL
fixed dividers (FCLK_DIVx) and the clock framework basically disabled
all the unused fixed dividers, thus disabled a critical clock path for
the SCPI Co-Processor.

This patch simply sets the FCLK_DIV2 gate as critical to ensure
nobody can disable it.

Fixes: 05f814402d61 ("clk: meson: add fdiv clock gates")
Signed-off-by: Neil Armstrong 
Tested-by: Kevin Hilman 
[few corrections in the commit description]
Signed-off-by: Jerome Brunet

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

2018-06-09T19:06:24+00:00

Pull clk updates from Stephen Boyd:
 "This time we have a good set of changes to the core framework that do
  some general cleanups, but nothing too major. The majority of the diff
  goes to two SoCs, Actions Semi and Qualcomm. A brand new driver is
  introduced for Actions Semi so it takes up some lines to add all the
  different types, and the Qualcomm diff is there because we add support
  for two SoCs and it's quite a bit of data.

  Otherwise the big driver updates are on TI Davinci and Amlogic
  platforms. And then the long tail of driver updates for various fixes
  and stuff follows after that.

  Core:
   - debugfs cleanups removing error checking and an unused provider API
   - Removal of a clk init typedef that isn't used
   - Usage of match_string() to simplify parent string name matching
   - OF clk helpers moved to their own file (linux/of_clk.h)
   - Make clk warnings more readable across kernel versions

  New Drivers:
   - Qualcomm SDM845 GCC and Video clk controllers
   - Qualcomm MSM8998 GCC
   - Actions Semi S900 SoC support
   - Nuvoton npcm750 microcontroller clks
   - Amlogic axg AO clock controller

  Removed Drivers:
   - Deprecated Rockchip clk-gate driver

  Updates:
   - debugfs functions stopped checking return values
   - Support for the MSIOF module clocks on Rensas R-Car M3-N
   - Support for the new Rensas RZ/G1C and R-Car E3 SoCs
   - Qualcomm GDSC, RCG, and PLL updates for clk changes in new SoCs
   - Berlin and Amlogic SPDX tagging
   - Usage of of_clk_get_parent_count() in more places
   - Proper implementation of the CDEV1/2 clocks on Tegra20
   - Allwinner H6 PRCM clock support and R40 EMAC support
   - Add critical flag to meson8b's fdiv2 as temporary fixup for ethernet
   - Round closest support for meson's mpll driver
   - Support for meson8b nand clocks and gxbb video decoder clocks
   - Mediatek mali clks
   - STM32MP1 fixes
   - Uniphier LD11/LD20 stream demux system clock"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (134 commits)
  clk: qcom: Export clk_fabia_pll_configure()
  clk: bcm: Update and add Stingray clock entries
  dt-bindings: clk: Update Stingray binding doc
  clk-si544: Properly round requested frequency to nearest match
  clk: ingenic: jz4770: Add 150us delay after enabling VPU clock
  clk: ingenic: jz4770: Enable power of AHB1 bus after ungating VPU clock
  clk: ingenic: jz4770: Modify C1CLK clock to disable CPU clock stop on idle
  clk: ingenic: jz4770: Change OTG from custom to standard gated clock
  clk: ingenic: Support specifying "wait for clock stable" delay
  clk: ingenic: Add support for clocks whose gate bit is inverted
  clk: use match_string() helper
  clk: bcm2835: use match_string() helper
  clk: Return void from debug_init op
  clk: remove clk_debugfs_add_file()
  clk: tegra: no need to check return value of debugfs_create functions
  clk: davinci: no need to check return value of debugfs_create functions
  clk: bcm2835: no need to check return value of debugfs_create functions
  clk: no need to check return value of debugfs_create functions
  clk: imx6: add EPIT clock support
  clk: mvebu: use correct bit for 98DX3236 NAND
  ...

clk: meson: axg: let mpll clocks round closest

2018-05-21T09:31:59+00:00

Let the mpll dividers achieve the closest rate possible, even if
it means rounding the requested rate up.

This is done to improve the accuracy of the rates provided by these
plls to the audio subsystem

Acked-by: Neil Armstrong 
Signed-off-by: Jerome Brunet

clk: meson: mpll: add round closest support

2018-05-21T09:31:29+00:00

Allow the mpll driver to round the requested rate up if
CLK_MESON_MPLL_ROUND_CLOSEST is set and it provides a rate closer to the
requested rate.

Acked-by: Neil Armstrong 
Acked-by: Martin Blumenstingl
Signed-off-by: Jerome Brunet

clk: meson: meson8b: mark fclk_div2 gate clocks as CLK_IS_CRITICAL

2018-05-21T08:33:58+00:00

Until commit 05f814402d6174 ("clk: meson: add fdiv clock gates") we
relied on the bootloader to enable the fclk_div clock gates. It turns
out that our clock tree is incomplete at least on Meson8b (tested with
an Odroid-C1, which uses an RGMII PHY) because after the mentioned
commit Ethernet is not working anymore (no RX/TX activity can be seen).
At the same time Ethernet was still working on Meson8m2 with a RMII PHY.

Testing has shown that as soon as "fclk_div2" is disabled Ethernet stops
working on Odroid-C1. Unfortunately it's currently not clear what the
Ethernet controller IP block uses the fclk_div2 clock for. Mark the
clock as CLK_IS_CRITICAL to keep it enabled (as it's already enabled by
most bootloaders by default, which is why we didn't notice it before).

Fixes: 05f814402d6174 ("clk: meson: add fdiv clock gates")
Cc: stable@vger.kernel.org
Signed-off-by: Martin Blumenstingl 
Tested-by: Kevin Hilman 
Signed-off-by: Jerome Brunet

clk: meson: use SPDX license identifiers consistently

2018-05-18T10:08:29+00:00

Replace every license notices in drivers/clk/meson by SPDX license
identifiers, as described in license-rules.rst

Acked-by: Neil Armstrong 
Acked-by: Stephen Boyd 
Signed-off-by: Jerome Brunet

clk: meson: drop CLK_SET_RATE_PARENT flag

2018-05-15T12:19:43+00:00

The clk81 is not expected to be changed, so drop this flag.

Signed-off-by: Yixun Lan 
Signed-off-by: Jerome Brunet

clk: meson-axg: Add AO Clock and Reset controller driver

2018-05-15T12:19:43+00:00

Adds a Clock and Reset controller driver for the Always-On part
of the Amlogic Meson-AXG SoC.

Signed-off-by: Qiufang Dai 
Signed-off-by: Yixun Lan 
Signed-off-by: Jerome Brunet

clk: meson: aoclk: refactor common code into dedicated file

2018-05-15T12:19:42+00:00

We try to refactor the common code into one dedicated file,
while preparing to add new Meson-AXG aoclk driver, this would
help us to better share the code by all aoclk drivers.

Suggested-by: Jerome Brunet 
Signed-off-by: Yixun Lan 
Signed-off-by: Jerome Brunet