linux.git/drivers/clk/imx, branch v6.0

clk: imx93: drop of_match_ptr

2022-09-29T01:37:36+00:00

There is build warning when CONFIG_OF is not selected.
>> drivers/clk/imx/clk-imx93.c:324:34: warning: 'imx93_clk_of_match'
>> defined but not used [-Wunused-const-variable=]
     324 | static const struct of_device_id imx93_clk_of_match[] = {
         |                                  ^~~~~~~~~~~~~~~~~~

The driver only support DT table, no sense to use of_match_ptr.

Fixes: 24defbe194b6 ("clk: imx: add i.MX93 clk")
Reported-by: kernel test robot 
Signed-off-by: Peng Fan 
Link: https://lore.kernel.org/r/20220830033137.4149542-3-peng.fan@oss.nxp.com
Reviewed-by: Abel Vesa 
Signed-off-by: Stephen Boyd

clk: imx: imx6sx: remove the SET_RATE_PARENT flag for QSPI clocks

2022-09-28T20:26:16+00:00

There is no dedicate parent clock for QSPI so SET_RATE_PARENT flag
should not be used. For instance, the default parent clock for QSPI is
pll2_bus, which is also the parent clock for quite a few modules, such
as MMDC, once GPMI NAND set clock rate for EDO5 mode can cause system
hang due to pll2_bus rate changed.

Fixes: f1541e15e38e ("clk: imx6sx: Switch to clk_hw based API")
Signed-off-by: Han Xu 
Link: https://lore.kernel.org/r/20220915150959.3646702-1-han.xu@nxp.com
Tested-by: Fabio Estevam 
Reviewed-by: Abel Vesa 
Signed-off-by: Stephen Boyd

clk: imx: clk-fracn-gppll: Add more freq config for video pll

2022-06-16T14:28:59+00:00

Add the [484,498,445.3]MHz frequency support that will be used
by video subsystem on imx93.

Signed-off-by: Jacky Bai 
Signed-off-by: Peng Fan 
Reviewed-by: Ye Li 
Reviewed-by: Abel Vesa 
Link: https://lore.kernel.org/r/20220609132902.3504651-8-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa

clk: imx: clk-fracn-gppll: correct rdiv

2022-06-16T14:28:59+00:00

According to Reference Manual:
 000b - Divide by 1
 001b - Divide by 1
 010b - Divide by 2
 011b - Divide by 3
 100b - Divide by 4
 101b - Divide by 5
 110b - Divide by 6
 111b - Divide by 7

So only need increase rdiv by 1 when the register value is 0.

Fixes: 1b26cb8a77a4 ("clk: imx: support fracn gppll")
Signed-off-by: Peng Fan 
Reviewed-by: Jacky Bai 
Reviewed-by: Abel Vesa 
Link: https://lore.kernel.org/r/20220609132902.3504651-7-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa

clk: imx: clk-fracn-gppll: Return rate in rate table properly in ->recalc_rate()

2022-06-16T14:28:59+00:00

The PLL parameters in rate table should be directly compared with
those read from PLL registers instead of the cooked ones.

Fixes: 1b26cb8a77a4 ("clk: imx: support fracn gppll")
Cc: Abel Vesa 
Cc: Michael Turquette 
Cc: Stephen Boyd 
Cc: Shawn Guo 
Cc: Sascha Hauer 
Cc: Pengutronix Kernel Team 
Cc: Fabio Estevam 
Cc: NXP Linux Team 
Cc: Peng Fan 
Signed-off-by: Liu Ying 
Reviewed-by: Peng Fan 
Reviewed-by: Abel Vesa 
Link: https://lore.kernel.org/r/20220609132902.3504651-6-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa

clk: imx: clk-fracn-gppll: fix mfd value

2022-06-16T14:28:59+00:00

According to spec:
A value of 0 is disallowed and should not be programmed in this register

Fix to 1.

Fixes: 1b26cb8a77a4 ("clk: imx: support fracn gppll")
Signed-off-by: Peng Fan 
Reviewed-by: Jacky Bai 
Reviewed-by: Abel Vesa 
Link: https://lore.kernel.org/r/20220609132902.3504651-5-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa

clk: imx93: Correct the edma1's parent clock

2022-06-16T14:28:59+00:00

For EDMA1 in AONMIX, its parent clock should be from cm33_root,
so Correct it.

Fixes: 24defbe194b65("clk: imx: add i.MX93 clk")
Signed-off-by: Jacky Bai 
Signed-off-by: Peng Fan 
Reviewed-by: Peng Fan 
Reviewed-by: Abel Vesa 
Link: https://lore.kernel.org/r/20220609132902.3504651-4-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa

clk: imx93: correct nic_media parent

2022-06-16T14:28:59+00:00

NIC_MEDIA sources from media_axi_root, not media_apb_root.

Fixes: 24defbe194b6 ("clk: imx: add i.MX93 clk")
Signed-off-by: Peng Fan 
Reviewed-by: Abel Vesa 
Link: https://lore.kernel.org/r/20220609132902.3504651-3-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa

clk: imx93: use adc_root as the parent clock of adc1

2022-06-16T14:28:59+00:00

When debug, find after system boot up, all adc register operation
will trigger system hang, this is because the internal adc ipg
clock is gate off. In dts, only reference the IMX93_CLK_ADC1_GATE,
which is adc1, no one touch the adc_root, so adc_root will be gate
off automatically after system boot up.

Fixes: 24defbe194b6 ("clk: imx: add i.MX93 clk")
Signed-off-by: Haibo Chen 
Signed-off-by: Jacky Bai 
Signed-off-by: Peng Fan 
Reviewed-by: Peng Fan 
Reviewed-by: Abel Vesa 
Link: https://lore.kernel.org/r/20220609132902.3504651-2-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa

Merge tag 'driver-core-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2022-06-03T18:48:47+00:00

Pull driver core updates from Greg KH:
 "Here is the set of driver core changes for 5.19-rc1.

  Lots of tiny driver core changes and cleanups happened this cycle, but
  the two major things are:

   - firmware_loader reorganization and additions including the ability
     to have XZ compressed firmware images and the ability for userspace
     to initiate the firmware load when it needs to, instead of being
     always initiated by the kernel. FPGA devices specifically want this
     ability to have their firmware changed over the lifetime of the
     system boot, and this allows them to work without having to come up
     with yet-another-custom-uapi interface for loading firmware for
     them.

   - physical location support added to sysfs so that devices that know
     this information, can tell userspace where they are located in a
     common way. Some ACPI devices already support this today, and more
     bus types should support this in the future.

  Smaller changes include:

   - driver_override api cleanups and fixes

   - error path cleanups and fixes

   - get_abi script fixes

   - deferred probe timeout changes.

  It's that last change that I'm the most worried about. It has been
  reported to cause boot problems for a number of systems, and I have a
  tested patch series that resolves this issue. But I didn't get it
  merged into my tree before 5.18-final came out, so it has not gotten
  any linux-next testing.

  I'll send the fixup patches (there are 2) as a follow-on series to this
  pull request.

  All have been tested in linux-next for weeks, with no reported issues
  other than the above-mentioned boot time-outs"

* tag 'driver-core-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits)
  driver core: fix deadlock in __device_attach
  kernfs: Separate kernfs_pr_cont_buf and rename_lock.
  topology: Remove unused cpu_cluster_mask()
  driver core: Extend deferred probe timeout on driver registration
  MAINTAINERS: add Russ Weight as a firmware loader maintainer
  driver: base: fix UAF when driver_attach failed
  test_firmware: fix end of loop test in upload_read_show()
  driver core: location: Add "back" as a possible output for panel
  driver core: location: Free struct acpi_pld_info *pld
  driver core: Add "*" wildcard support to driver_async_probe cmdline param
  driver core: location: Check for allocations failure
  arch_topology: Trace the update thermal pressure
  kernfs: Rename kernfs_put_open_node to kernfs_unlink_open_file.
  export: fix string handling of namespace in EXPORT_SYMBOL_NS
  rpmsg: use local 'dev' variable
  rpmsg: Fix calling device_lock() on non-initialized device
  firmware_loader: describe 'module' parameter of firmware_upload_register()
  firmware_loader: Move definitions from sysfs_upload.h to sysfs.h
  firmware_loader: Fix configs for sysfs split
  selftests: firmware: Add firmware upload selftests
  ...