linux.git/drivers/clk/imx, branch v4.17

clk: imx6ull: use OSC clock during AXI rate change

2018-05-15T22:41:01+00:00

On i.MX6 ULL using PLL3 seems to cause a freeze when setting
the parent to IMX6UL_CLK_PLL3_USB_OTG. This only seems to appear
since commit 6f9575e55632 ("clk: imx: Add CLK_IS_CRITICAL flag
for busy divider and busy mux"), probably because the clock is
now forced to be on.

Fixes: 6f9575e55632("clk: imx: Add CLK_IS_CRITICAL flag for busy divider and busy mux")
Signed-off-by: Stefan Agner 
Signed-off-by: Stephen Boyd

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

2018-04-13T22:51:06+00:00

Pull clk updates from Stephen Boyd:
 "The large diff this time around is from the addition of a new clk
  driver for the TI Davinci family of SoCs. So far those clks have been
  supported with a custom implementation of the clk API in the arch port
  instead of in the CCF. With this driver merged we're one step closer
  to having a single clk API implementation.

  The other large diff is from the Amlogic clk driver that underwent
  some major surgery to use regmap. Beyond that, the biggest hitter is
  Samsung which needed some reworks to properly handle clk provider
  power domains and a bunch of PLL rate updates.

  The core framework was fairly quiet this round, just getting some
  cleanups and small fixes for some of the more esoteric features. And
  the usual set of driver non-critical fixes, cleanups, and minor
  additions are here as well.

  Core:
   - Rejig clk_ops::init() to be a little earlier for phase/accuracy ops
   - debugfs ops macroized to shave some lines of boilerplate code
   - Always calculate the phase instead of caching it in clk_get_phase()
   - More __must_check on bulk clk APIs

  New Drivers:
   - TI's Davinci family of SoCs
   - Intel's Stratix10 SoC
   - stm32mp157 SoC
   - Allwinner H6 CCU
   - Silicon Labs SI544 clock generator chip
   - Renesas R-Car M3-N and V3H SoCs
   - i.MX6SLL SoCs

  Removed Drivers:
   - ST-Ericsson AB8540/9540

  Updates:
   - Mediatek MT2701 and MT7622 audsys support and MT2712 updates
   - STM32F469 DSI and STM32F769 sdmmc2 support
   - GPIO clks can sleep now
   - Spreadtrum SC9860 RTC clks
   - Nvidia Tegra MBIST workarounds and various minor fixes
   - Rockchip phase handling fixes and a memory leak plugged
   - Renesas drivers switch to readl/writel from clk_readl/clk_writel
   - Renesas gained CPU (Z/Z2) and watchdog support
   - Rockchip rk3328 display clks and rk3399 1.6GHz PLL support
   - Qualcomm PM8921 PMIC XO buffers
   - Amlogic migrates to regmap APIs
   - TI Keystone clk latching support
   - Allwinner H3 and H5 video clk fixes
   - Broadcom BCM2835 PLLs needed another bit to enable
   - i.MX6SX CKO mux fix and i.MX7D Video PLL divider fix
   - i.MX6UL/ULL epdc_podf support
   - Hi3798CV200 COMBPHY0 and USB2_OTG_UTMI and phase support for eMMC"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (233 commits)
  clk: davinci: add a reset lookup table for psc0
  clk: imx: add clock driver for imx6sll
  dt-bindings: imx: update clock doc for imx6sll
  clk: imx: add new gate/gate2 wrapper funtion
  clk: imx: Add CLK_IS_CRITICAL flag for busy divider and busy mux
  clk: cs2000: set pm_ops in hibernate-compatible way
  clk: bcm2835: De-assert/assert PLL reset signal when appropriate
  clk: imx7d: Move clks_init_on before any clock operations
  clk: imx7d: Correct ahb clk parent select
  clk: imx7d: Correct dram pll type
  clk: imx7d: Add USB clock information
  clk: socfpga: stratix10: add clock driver for Stratix10 platform
  dt-bindings: documentation: add clock bindings information for Stratix10
  clk: ti: fix flag space conflict with clkctrl clocks
  clk: uniphier: add additional ethernet clock lines for Pro4
  clk: uniphier: add SATA clock control support
  clk: uniphier: add PCIe clock control support
  clk: Add driver for the si544 clock generator chip
  clk: davinci: Remove redundant dev_err calls
  clk: uniphier: add ethernet clock control support for PXs3
  ...

Merge branches 'clk-stratix10', 'clk-imx', 'clk-bcm', 'clk-cs2000' and 'clk-imx6sll' into clk-next

2018-04-06T20:22:12+00:00

* clk-stratix10:
  clk: socfpga: stratix10: add clock driver for Stratix10 platform
  dt-bindings: documentation: add clock bindings information for Stratix10

* clk-imx:
  clk: imx7d: Move clks_init_on before any clock operations
  clk: imx7d: Correct ahb clk parent select
  clk: imx7d: Correct dram pll type
  clk: imx7d: Add USB clock information
  clk: imx: pllv2: avoid using uninitialized values
  clk: imx6ull: Add epdc_podf instead of sim_podf
  clk: imx: imx7d: correct video pll clock tree
  clk: imx: imx7d: add the Keypad Port module clock
  clk: imx7d: add CAAM clock
  clk: imx: imx7d: add the snvs clock
  clk: imx: imx6sx: update cko mux options

* clk-bcm:
  clk: bcm2835: De-assert/assert PLL reset signal when appropriate

* clk-cs2000:
  clk: cs2000: set pm_ops in hibernate-compatible way

* clk-imx6sll:
  clk: imx: add clock driver for imx6sll
  dt-bindings: imx: update clock doc for imx6sll
  clk: imx: add new gate/gate2 wrapper funtion
  clk: imx: Add CLK_IS_CRITICAL flag for busy divider and busy mux

clk: imx: add clock driver for imx6sll

2018-04-06T18:27:27+00:00

Add clk driver support for imx6sll.

Signed-off-by: Bai Ping 
Acked-by: Dong Aisheng 
Signed-off-by: Stephen Boyd

clk: imx: add new gate/gate2 wrapper funtion

2018-04-06T18:27:25+00:00

Add new gate/gate2 wrapper function to register clocks with optional flags.

Signed-off-by: Bai Ping 
Acked-by: Dong Aisheng 
Signed-off-by: Stephen Boyd

clk: imx: Add CLK_IS_CRITICAL flag for busy divider and busy mux

2018-04-06T18:27:24+00:00

The busy divider and busy mux is actually used by the system critical clocks,
so add 'CLK_IS_CRITICAL' to clocks registered with these two type.

Signed-off-by: Bai Ping 
Acked-by: Dong Aisheng 
Signed-off-by: Stephen Boyd

clk: imx7d: Move clks_init_on before any clock operations

2018-04-06T17:14:04+00:00

For init on clocks we should move it at the first place in imx7d_clocks_init()
before any clock operations, else the clock operation may fail in case the clock
is still not on.

Acked-by: Ranjani Vaidyanathan 
Signed-off-by: Dong Aisheng 
Signed-off-by: Irina Tirdea 
Signed-off-by: Abel Vesa 
Signed-off-by: Stephen Boyd

clk: imx7d: Correct ahb clk parent select

2018-04-06T17:14:03+00:00

Design team change the ahb's clk parent options but
did NOT update the DOC accordingly in time, so the
AHB/IPG's clk rate in clk tree is incorrect, AHB is
67.5MHz and IPG is 33.75MHz, but using scope to
monitor them, they are actually 135MHz and 67.5MHz,
update the clk parent option to make clk tree info
correct.

Signed-off-by: Anson Huang 
Signed-off-by: Irina Tirdea 
Signed-off-by: Abel Vesa 
Signed-off-by: Stephen Boyd

clk: imx7d: Correct dram pll type

2018-04-06T17:13:59+00:00

DRAM PLL is a audio/video type PLL, need to correct
it to get correct ops of PLL.

There is a test_div placed before DRAM PLL's gate, so
add this test div clk.

Signed-off-by: Anson Huang 
Signed-off-by: Irina Tirdea 
Signed-off-by: Abel Vesa 
Signed-off-by: Stephen Boyd

clk: imx7d: Add USB clock information

2018-04-06T17:13:55+00:00

Add USB clock information, the pll_usb_main_clk is USB_PLL at CCM
which is the output of USBOTG2 PHY.

Signed-off-by: Peter Chen 
Signed-off-by: Irina Tirdea 
Signed-off-by: Abel Vesa 
Signed-off-by: Stephen Boyd