linux.git/drivers/clk/imx, branch v4.12

clk: imx7d: fix USDHC NAND clock

2017-04-19T16:44:14+00:00

The USDHC NAND root clock is not gated by any CCM clock gate. Remove
the bogus gate definition.

Signed-off-by: Stefan Agner 
Acked-by: Dong Aisheng 
Signed-off-by: Stephen Boyd

clk: imx7d: add the missing ipg_root_clk

2017-04-19T16:10:23+00:00

Add the missing ipg_root_clk which actually is already used by many
orphan clks in current tree.

Cc: Shawn Guo 
Cc: Fabio Estevam 
Reviewed-by: Stefan Agner 
Tested-by: Stefan Agner 
Signed-off-by: Dong Aisheng 
Signed-off-by: Stephen Boyd

clk: clk-imx7d: fix ahb clk definition

2017-04-19T16:10:12+00:00

MX7D ahb clk actually has no LPCG gate, current LPCG offset 0x4200
used actually is for adc, not ahb. After fix, correct ocram_s_clk
parent accordingly as well.

Cc: Shawn Guo 
Cc: Fabio Estevam 
Reviewed-by: Stefan Agner 
Tested-by: Stefan Agner 
Signed-off-by: Dong Aisheng 
Signed-off-by: Stephen Boyd

clk: imx: correct uart4_serial clock name in driver for i.MX6UL

2017-04-12T16:51:36+00:00

Reviewed-by: Fabio Estevam 
Signed-off-by: Robin van der Gracht 
Signed-off-by: Stephen Boyd 
Signed-off-by: Michael Turquette

clk: imx: clk-imx6ul: The i.mx6ul has no aips_tz3 clock

2017-04-12T16:51:27+00:00

The clock was mapped on CG15 (gpio2_clocks) in the CCRG0 register.

Reviewed-by: Fabio Estevam 
Signed-off-by: Robin van der Gracht 
Signed-off-by: Stephen Boyd 
Signed-off-by: Michael Turquette

Merge branch 'clk-imx7', 'clk-bcm2835' into clk-next

2017-01-26T23:52:37+00:00

* clk-imx7:
  clk: imx7d: Add the OCOTP clock

* clk-bcm2835:
  clk: bcm2835: Add leaf clock measurement support, disabled by default
  clk: bcm2835: Register the DSI0/DSI1 pixel clocks.
  clk: bcm2835: Don't rate change PLLs on behalf of DSI PLL dividers.

clk: imx7d: Add the OCOTP clock

2017-01-21T00:27:19+00:00

Add the OCOTP so that this hardware block can be used.

Signed-off-by: Fabio Estevam 
Signed-off-by: Stephen Boyd

clk: imx6: don't restrict LDB mux changes on QuadPlus

2017-01-20T23:22:37+00:00

The LDB mux/gate layout has been fixed on QuadPlus, so there is no need
to restrict the LDB mux changes on this hardware, as the erratum
preventing this from working properly is gone.

Signed-off-by: Lucas Stach 
Reviewed-by: Fabio Estevam 
Signed-off-by: Stephen Boyd

clk: imx: pllv3: support fractional multiplier on vf610 PLL1/PLL2

2017-01-10T00:06:41+00:00

On vf610, PLL1 and PLL2 have registers to configure fractional part of
frequency multiplier.

This patch adds support for these registers.

This fixes "fast system clock" issue on boards where bootloader sets
fractional multiplier for PLL1.

Suggested-by: Andrey Smirnov 
CC: Chris Healy 
Signed-off-by: Nikita Yushchenko 
Tested-by: Andrey Smirnov 
Signed-off-by: Stephen Boyd

Merge tag 'armsoc-fixes-nc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2016-12-15T23:15:13+00:00

Pull ARM SoC non-urgent fixes from Arnd Bergmann:
 "As usual, we queue up a few fixes that don't seem urgent enough to go
  in through -rc, or that just came a little too late given their size.

  The zx fixes make the platform finally boot on real hardware, the
  davinci and imx31 get the DT support working better for some of the
  machines that are still normally used with classic board files. One
  tegra fix is important for new bootloader versions, but the bug has
  been around for a while without anyone noticing.

  The other changes are mostly cosmetic"

* tag 'armsoc-fixes-nc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (22 commits)
  arm64: tegra: Add missing Smaug revision
  arm64: tegra: Add VDD_GPU regulator to Jetson TX1
  arm64: dts: zte: clean up gic-v3 redistributor properties
  arm64: dts: zx: Fix gic GICR property
  bus: vexpress-config: fix device reference leak
  soc: ti: qmss: fix the case when !SMP
  ARM: lpc32xx: drop duplicate header device.h
  ARM: ixp4xx: drop duplicate header gpio.h
  ARM: socfpga: fix spelling mistake in error message
  ARM: dts: imx6q-cm-fx6: fix fec pinctrl
  ARM: dts: imx7d-pinfunc: fix UART pinmux defines
  ARM: dts: imx6qp: correct LDB clock inputs
  ARM: OMAP2+: pm-debug: Use seq_putc() in two functions
  ARM: OMAP2+: Remove the omapdss_early_init_of() function
  mfd: tps65217: Fix mismatched interrupt number
  ARM: zx: Fix error handling
  ARM: spear: Fix error handling
  ARM: davinci: da850: Fix pwm name matching
  ARM: clk: imx31: properly init clocks for machines with DT
  clk: imx31: fix rewritten input argument of mx31_clocks_init()
  ...