linux.git/drivers/clk/Kconfig, branch v4.16

Merge branches 'clk-aspeed', 'clk-lock-UP', 'clk-mediatek' and 'clk-allwinner' into clk-next

2018-01-27T00:43:39+00:00

* clk-aspeed:
  clk: aspeed: Handle inverse polarity of USB port 1 clock gate
  clk: aspeed: Fix return value check in aspeed_cc_init()
  clk: aspeed: Add reset controller
  clk: aspeed: Register gated clocks
  clk: aspeed: Add platform driver and register PLLs
  clk: aspeed: Register core clocks
  clk: Add clock driver for ASPEED BMC SoCs
  dt-bindings: clock: Add ASPEED constants

* clk-lock-UP:
  clk: fix reentrancy of clk_enable() on UP systems

* clk-mediatek:
  clk: mediatek: adjust dependency of reset.c to avoid unexpectedly being built
  clk: mediatek: Fix all warnings for missing struct clk_onecell_data
  clk: mediatek: fixup test-building of MediaTek clock drivers
  clk: mediatek: group drivers under indpendent menu

* clk-allwinner:
  clk: sunxi-ng: a83t: Add M divider to TCON1 clock
  clk: sunxi-ng: fix the A64/H5 clock description of DE2 CCU
  clk: sunxi-ng: add support for Allwinner H3 DE2 CCU
  dt-bindings: fix the binding of Allwinner DE2 CCU of A83T and H3
  clk: sunxi-ng: sun8i: a83t: Use sigma-delta modulation for audio PLL
  clk: sunxi-ng: sun8i: a83t: Add /2 fixed post divider to audio PLL
  clk: sunxi-ng: Support fixed post-dividers on NM style clocks
  clk: sunxi-ng: sun50i: a64: Add 2x fixed post-divider to MMC module clocks
  clk: sunxi-ng: Support fixed post-dividers on MP style clocks
  clk: sunxi: Use PTR_ERR_OR_ZERO()

clk: Add clock driver for ASPEED BMC SoCs

2018-01-27T00:22:37+00:00

This adds the stub of a driver for the ASPEED SoCs. The clocks are
defined and the static registration is set up.

Reviewed-by: Andrew Jeffery 
Signed-off-by: Joel Stanley 
Reviewed-by: Benjamin Herrenschmidt 
Signed-off-by: Stephen Boyd

clk: sprd: Add common infrastructure

2017-12-21T23:00:51+00:00

Added Spreadtrum's clock driver framework together with common
structures and interface functions.

Signed-off-by: Chunyan Zhang 
Signed-off-by: Stephen Boyd

clk: Kconfig: Name RK805 in Kconfig for COMMON_CLK_RK808

2017-08-31T23:20:12+00:00

The RK808 and RK805 PMICs are using a similar register map.
We can reuse the clk driver for the RK805 PMIC. So let's add
the RK805 in the Kconfig description.

Signed-off-by: Elaine Zhang 
Signed-off-by: Joseph Chen 
Signed-off-by: Stephen Boyd

ARC: clk: introduce HSDK pll driver

2017-08-31T05:36:05+00:00

HSDK board manages its clocks using various PLLs. These PLL have same
dividers and corresponding control registers mapped to different addresses.
So we add one common driver for such PLLs.

Each PLL on HSDK board consists of three dividers: IDIV, FBDIV and
ODIV. Output clock value is managed using these dividers.

We add pre-defined tables with supported rate values and appropriate
configurations of IDIV, FBDIV and ODIV for each value.

As of today we add support for PLLs that generate clock for the
HSDK arc cpus, system, ddr, AXI tunnel and hdmi.

By this patch we add support for several plls (arc cpus pll and others),
so we had to use two different init types: CLK_OF_DECLARE for arc cpus pll
and regular probing for others plls.

Signed-off-by: Eugeniy Paltsev 
Reviewed-by: Vineet Gupta 
Signed-off-by: Stephen Boyd

clk: vc5: Add support for IDT VersaClock 5P49V6901

2017-07-17T18:51:00+00:00

Update IDT VersaClock 5 driver to support IDT VersaClock 6 5P49V6901.
This chip has two clock inputs (external XTAL or external CLKIN), four
fractional dividers (FODs) and five clock outputs (four universal clock
outputs and one reference clock output at OUT0_SELB_I2C).

Signed-off-by: Marek Vasut 
Cc: Alexey Firago 
Cc: Stephen Boyd 
Cc: Michael Turquette 
Cc: Laurent Pinchart 
Cc: linux-renesas-soc@vger.kernel.org
Tested-by: Laurent Pinchart 
on Salvator-XS with the display LVDS output.
Signed-off-by: Stephen Boyd

Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

2017-07-15T17:59:54+00:00

Pull MIPS updates from Ralf Baechle:
 "Boston platform support:
   - Document DT bindings
   - Add CLK driver for board clocks

  CM:
   - Avoid per-core locking with CM3 & higher
   - WARN on attempt to lock invalid VP, not BUG

  CPS:
   - Select CONFIG_SYS_SUPPORTS_SCHED_SMT for MIPSr6
   - Prevent multi-core with dcache aliasing
   - Handle cores not powering down more gracefully
   - Handle spurious VP starts more gracefully

  DSP:
   - Add lwx & lhx missaligned access support

  eBPF:
   - Add MIPS support along with many supporting change to add the
     required infrastructure

  Generic arch code:
   - Misc sysmips MIPS_ATOMIC_SET fixes
   - Drop duplicate HAVE_SYSCALL_TRACEPOINTS
   - Negate error syscall return in trace
   - Correct forced syscall errors
   - Traced negative syscalls should return -ENOSYS
   - Allow samples/bpf/tracex5 to access syscall arguments for sane
     traces
   - Cleanup from old Kconfig options in defconfigs
   - Fix PREF instruction usage by memcpy for MIPS R6
   - Fix various special cases in the FPU eulation
   - Fix some special cases in MIPS16e2 support
   - Fix MIPS I ISA /proc/cpuinfo reporting
   - Sort MIPS Kconfig alphabetically
   - Fix minimum alignment requirement of IRQ stack as required by
     ABI / GCC
   - Fix special cases in the module loader
   - Perform post-DMA cache flushes on systems with MAARs
   - Probe the I6500 CPU
   - Cleanup cmpxchg and add support for 1 and 2 byte operations
   - Use queued read/write locks (qrwlock)
   - Use queued spinlocks (qspinlock)
   - Add CPU shared FTLB feature detection
   - Handle tlbex-tlbp race condition
   - Allow storing pgd in C0_CONTEXT for MIPSr6
   - Use current_cpu_type() in m4kc_tlbp_war()
   - Support Boston in the generic kernel

  Generic platform:
   - yamon-dt: Pull YAMON DT shim code out of SEAD-3 board
   - yamon-dt: Support > 256MB of RAM
   - yamon-dt: Use serial* rather than uart* aliases
   - Abstract FDT fixup application
   - Set RTC_ALWAYS_BCD to 0
   - Add a MAINTAINERS entry

  core kernel:
   - qspinlock.c: include linux/prefetch.h

  Loongson 3:
   - Add support

  Perf:
   - Add I6500 support

  SEAD-3:
   - Remove GIC timer from DT
   - Set interrupt-parent per-device, not at root node
   - Fix GIC interrupt specifiers

  SMP:
   - Skip IPI setup if we only have a single CPU

  VDSO:
   - Make comment match reality
   - Improvements to time code in VDSO"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (86 commits)
  locking/qspinlock: Include linux/prefetch.h
  MIPS: Fix MIPS I ISA /proc/cpuinfo reporting
  MIPS: Fix minimum alignment requirement of IRQ stack
  MIPS: generic: Support MIPS Boston development boards
  MIPS: DTS: img: Don't attempt to build-in all .dtb files
  clk: boston: Add a driver for MIPS Boston board clocks
  dt-bindings: Document img,boston-clock binding
  MIPS: Traced negative syscalls should return -ENOSYS
  MIPS: Correct forced syscall errors
  MIPS: Negate error syscall return in trace
  MIPS: Drop duplicate HAVE_SYSCALL_TRACEPOINTS select
  MIPS16e2: Provide feature overrides for non-MIPS16 systems
  MIPS: MIPS16e2: Report ASE presence in /proc/cpuinfo
  MIPS: MIPS16e2: Subdecode extended LWSP/SWSP instructions
  MIPS: MIPS16e2: Identify ASE presence
  MIPS: VDSO: Fix a mismatch between comment and preprocessor constant
  MIPS: VDSO: Add implementation of gettimeofday() fallback
  MIPS: VDSO: Add implementation of clock_gettime() fallback
  MIPS: VDSO: Fix conversions in do_monotonic()/do_monotonic_coarse()
  MIPS: Use current_cpu_type() in m4kc_tlbp_war()
  ...

clk: boston: Add a driver for MIPS Boston board clocks

2017-07-11T12:13:06+00:00

Add a driver for the clocks provided by the MIPS Boston board from
Imagination Technologies. 2 clocks are provided - the system clock & the
CPU clock - and each is a simple fixed rate clock whose frequency can be
determined by reading a register provided by the board.

Signed-off-by: Paul Burton 
Acked-by: Stephen Boyd 
Reviewed-by: James Hogan 
Cc: Michael Turquette 
Cc: linux-clk@vger.kernel.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16483/
Signed-off-by: Ralf Baechle

clk: Add Gemini SoC clock controller

2017-06-21T17:45:54+00:00

The Cortina Systems Gemini (SL3516/CS3516) has an on-chip clock
controller that derive all clocks from a single crystal, using some
documented and some undocumented PLLs, half dividers, counters and
gates. This is a best attempt to construct a clock driver for the
clocks so at least we can gate off unused hardware and driver the
PCI bus clock.

Acked-by: Philipp Zabel 
Signed-off-by: Linus Walleij 
[sboyd@codeaurora.org: Fix devm_ioremap_resource() return value
checking]
Signed-off-by: Stephen Boyd

clk: keystone: Add sci-clk driver support

2017-06-14T16:05:07+00:00

In K2G, the clock handling is done through firmware executing on a
separate core. Linux kernel needs to communicate to the firmware
through TI system control interface to access any power management
related resources, including clocks.

The keystone sci-clk driver does this, by communicating to the
firmware through the TI SCI driver. The driver adds support for
registering clocks through DT, and basic required clock operations
like prepare/get_rate, etc.

Signed-off-by: Tero Kristo 
[sboyd@codeaurora.org: Make ti_sci_init_clocks() static]
Signed-off-by: Stephen Boyd