linux.git/drivers/char/ipmi, branch v5.0-rc2

drivers/ipmi: Replace synchronize_sched() with synchronize_rcu()

2018-11-27T17:21:36+00:00

Now that synchronize_rcu() waits for preempt-disable regions of code
as well as RCU read-side critical sections, synchronize_sched() can be
replaced by synchronize_rcu().  This commit therefore makes this change.

Signed-off-by: Paul E. McKenney 
Cc: Arnd Bergmann 
Cc: Greg Kroah-Hartman 
Cc: 
Acked-by: Corey Minyard

ipmi: Fix timer race with module unload

2018-10-12T01:08:27+00:00

Please note that below oops is from an older kernel, but the same
race seems to be present in the upstream kernel too.

---8<---

The following panic was encountered during removing the ipmi_ssif
module:

[ 526.352555] Unable to handle kernel paging request at virtual address ffff000006923090
[ 526.360464] Mem abort info:
[ 526.363257] ESR = 0x86000007
[ 526.366304] Exception class = IABT (current EL), IL = 32 bits
[ 526.372221] SET = 0, FnV = 0
[ 526.375269] EA = 0, S1PTW = 0
[ 526.378405] swapper pgtable: 4k pages, 48-bit VAs, pgd = 000000008ae60416
[ 526.385185] [ffff000006923090] *pgd=000000bffcffe803, *pud=000000bffcffd803, *pmd=0000009f4731a003, *pte=0000000000000000
[ 526.396141] Internal error: Oops: 86000007 [#1] SMP
[ 526.401008] Modules linked in: nls_iso8859_1 ipmi_devintf joydev input_leds ipmi_msghandler shpchp sch_fq_codel ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ip_tables x_tables autofs4 btrfs zstd_compress raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear i2c_smbus hid_generic usbhid uas hid usb_storage ast aes_ce_blk i2c_algo_bit aes_ce_cipher qede ttm crc32_ce ptp crct10dif_ce drm_kms_helper ghash_ce syscopyarea sha2_ce sysfillrect sysimgblt pps_core fb_sys_fops sha256_arm64 sha1_ce mpt3sas qed drm raid_class ahci scsi_transport_sas libahci gpio_xlp i2c_xlp9xx aes_neon_bs aes_neon_blk crypto_simd cryptd aes_arm64 [last unloaded: ipmi_ssif]
[ 526.468085] CPU: 125 PID: 0 Comm: swapper/125 Not tainted 4.15.0-35-generic #38~lp1775396+build.1
[ 526.476942] Hardware name: To be filled by O.E.M. Saber/Saber, BIOS 0ACKL022 08/14/2018
[ 526.484932] pstate: 00400009 (nzcv daif +PAN -UAO)
[ 526.489713] pc : 0xffff000006923090
[ 526.493198] lr : call_timer_fn+0x34/0x178
[ 526.497194] sp : ffff000009b0bdd0
[ 526.500496] x29: ffff000009b0bdd0 x28: 0000000000000082
[ 526.505796] x27: 0000000000000002 x26: ffff000009515188
[ 526.511096] x25: ffff000009515180 x24: ffff0000090f1018
[ 526.516396] x23: ffff000009519660 x22: dead000000000200
[ 526.521696] x21: ffff000006923090 x20: 0000000000000100
[ 526.526995] x19: ffff809eeb466a40 x18: 0000000000000000
[ 526.532295] x17: 000000000000000e x16: 0000000000000007
[ 526.537594] x15: 0000000000000000 x14: 071c71c71c71c71c
[ 526.542894] x13: 0000000000000000 x12: 0000000000000000
[ 526.548193] x11: 0000000000000001 x10: ffff000009b0be88
[ 526.553493] x9 : 0000000000000000 x8 : 0000000000000005
[ 526.558793] x7 : ffff80befc1f8528 x6 : 0000000000000020
[ 526.564092] x5 : 0000000000000040 x4 : 0000000020001b20
[ 526.569392] x3 : 0000000000000000 x2 : ffff809eeb466a40
[ 526.574692] x1 : ffff000006923090 x0 : ffff809eeb466a40
[ 526.579992] Process swapper/125 (pid: 0, stack limit = 0x000000002eb50acc)
[ 526.586854] Call trace:
[ 526.589289] 0xffff000006923090
[ 526.592419] expire_timers+0xc8/0x130
[ 526.596070] run_timer_softirq+0xec/0x1b0
[ 526.600070] __do_softirq+0x134/0x328
[ 526.603726] irq_exit+0xc8/0xe0
[ 526.606857] __handle_domain_irq+0x6c/0xc0
[ 526.610941] gic_handle_irq+0x84/0x188
[ 526.614679] el1_irq+0xe8/0x180
[ 526.617822] cpuidle_enter_state+0xa0/0x328
[ 526.621993] cpuidle_enter+0x34/0x48
[ 526.625564] call_cpuidle+0x44/0x70
[ 526.629040] do_idle+0x1b8/0x1f0
[ 526.632256] cpu_startup_entry+0x2c/0x30
[ 526.636174] secondary_start_kernel+0x11c/0x130
[ 526.640694] Code: bad PC value
[ 526.643800] ---[ end trace d020b0b8417c2498 ]---
[ 526.648404] Kernel panic - not syncing: Fatal exception in interrupt
[ 526.654778] SMP: stopping secondary CPUs
[ 526.658734] Kernel Offset: disabled
[ 526.662211] CPU features: 0x5800c38
[ 526.665688] Memory Limit: none
[ 526.668768] ---[ end Kernel panic - not syncing: Fatal exception in interrupt

Prevent mod_timer from arming a timer that was already removed by
del_timer during module unload.

Signed-off-by: Jan Glauber 
Cc:  # 3.19
Signed-off-by: Corey Minyard

ipmi:ssif: Add support for multi-part transmit messages > 2 parts

2018-09-18T21:18:44+00:00

The spec was fairly confusing about how multi-part transmit messages
worked, so the original implementation only added support for two
part messages.  But after talking about it with others and finding
something I missed, I think it makes more sense.

The spec mentions smbus command 8 in a table at the end of the
section on SSIF support as the end transaction.  If that works,
then all is good and as it should be.  However, some implementations
seem to use a middle transaction <32 bytes tomark the end because of the
confusion in the spec, even though that is an SMBus violation if
the number of bytes is zero.

So this change adds some tests, if command=8 works, it uses that,
otherwise if an empty end transaction works, it uses a middle
transaction <32 bytes to mark the end.  If neither works, then
it limits the size to 63 bytes as it is now.

Cc: Harri Hakkarainen 
Cc: Bazhenov, Dmitry 
Cc: Mach, Dat 
Signed-off-by: Corey Minyard

ipmi: Remove platform driver overrides and use the id_table

2018-09-18T21:15:33+00:00

The IPMI DMI code was adding platform overrides, which is not
really an ideal solution.  Switch to using the id_table in
the drivers to identify the devices.

Signed-off-by: Corey Minyard

ipmi: Free the address list on module cleanup

2018-09-18T21:15:33+00:00

Otherwise the memory is leaked.

Signed-off-by: Corey Minyard

ipmi: Don't leave holes in the I2C address list in the ssif driver

2018-09-18T21:15:33+00:00

The algorithm to populate the I2C address list would leave holes
in the list on duplicates.

Signed-off-by: Corey Minyard

ipmi: fix return value of ipmi_set_my_LUN

2018-09-18T21:15:33+00:00

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/char/ipmi/ipmi_msghandler.c: In function 'ipmi_set_my_LUN':
drivers/char/ipmi/ipmi_msghandler.c:1335:13: warning:
 variable 'rv' set but not used [-Wunused-but-set-variable]
  int index, rv = 0;

'rv' should be the correct return value.

Fixes: 048f7c3e352e ("ipmi: Properly release srcu locks on error conditions")
Signed-off-by: YueHaibing 
Signed-off-by: Corey Minyard

ipmi: Convert pr_xxx() to dev_xxx() in the BT code

2018-09-18T21:15:33+00:00

Cleanups, do the replacement and change the levels to the proper
ones for the function they are serving, as many were wrong.

Signed-off-by: Corey Minyard

ipmi:dmi: Ignore IPMI SMBIOS entries with a zero base address

2018-09-18T21:15:33+00:00

Looking at logs from systems all over the place, it looks like tons
of broken systems exist that set the base address to zero.  I can
only guess that is some sort of non-standard idea to mark the
interface as not being present.  It can't be zero, anyway, so just
complain and ignore it.

Signed-off-by: Corey Minyard

ipmi:dmi: Use pr_fmt in the IPMI DMI code

2018-09-18T21:15:33+00:00

It make things a little neater and saves some memory.

Signed-off-by: Corey Minyard