Pull UML updates from Richard Weinberger:

 - IRQ handling cleanups

 - Support for suspend

 - Various fixes for UML specific drivers: ubd, vector, xterm

* tag 'for-linus-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: (32 commits)
  um: Fix build w/o CONFIG_PM_SLEEP
  um: time-travel: Correct time event IRQ delivery
  um: irq/sigio: Support suspend/resume handling of workaround IRQs
  um: time-travel: Actually apply "free-until" optimisation
  um: chan_xterm: Fix fd leak
  um: tty: Fix handling of close in tty lines
  um: Monitor error events in IRQ controller
  um: allocate a guard page to helper threads
  um: support some of ARCH_HAS_SET_MEMORY
  um: time-travel: avoid multiple identical propagations
  um: Fetch registers only for signals which need them
  um: Support suspend to RAM
  um: Allow PM with suspend-to-idle
  um: time: Fix read_persistent_clock64() in time-travel
  um: Simplify os_idle_sleep() and sleep longer
  um: Simplify IRQ handling code
  um: Remove IRQ_NONE type
  um: irq: Reduce irq_reg allocation
  um: irq: Clean up and rename struct irq_fd
  um: Clean up alarm IRQ chip name
  ...

Pull s390 updates from Heiko Carstens:

 - Add support for the hugetlb_cma command line option to allocate
   gigantic hugepages using CMA

 - Add arch_get_random_long() support.

 - Add ap bus userspace notifications.

 - Increase default size of vmalloc area to 512GB and otherwise let it
   increase dynamically by the size of physical memory. This should fix
   all occurrences where the vmalloc area was not large enough.

 - Completely get rid of set_fs() (aka select SET_FS) and rework address
   space handling while doing that; making address space handling much
   more simple.

 - Reimplement getcpu vdso syscall in C.

 - Add support for extended SCLP responses (> 4k). This allows e.g. to
   handle also potential large system configurations.

 - Simplify KASAN by removing 3-level page table support and only
   supporting 4-levels from now on.

 - Improve debug-ability of the kernel decompressor code, which now
   prints also stack traces and symbols in case of problems to the
   console.

 - Remove more power management leftovers.

 - Other various fixes and improvements all over the place.

* tag 's390-5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (62 commits)
  s390/mm: add support to allocate gigantic hugepages using CMA
  s390/crypto: add arch_get_random_long() support
  s390/smp: perform initial CPU reset also for SMT siblings
  s390/mm: use invalid asce for user space when switching to init_mm
  s390/idle: fix accounting with machine checks
  s390/idle: add missing mt_cycles calculation
  s390/boot: add build-id to decompressor
  s390/kexec_file: fix diag308 subcode when loading crash kernel
  s390/cio: fix use-after-free in ccw_device_destroy_console
  s390/cio: remove pm support from ccw bus driver
  s390/cio: remove pm support from css-bus driver
  s390/cio: remove pm support from IO subchannel drivers
  s390/cio: remove pm support from chsc subchannel driver
  s390/vmur: remove unused pm related functions
  s390/tape: remove unsupported PM functions
  s390/cio: remove pm support from eadm-sch drivers
  s390: remove pm support from console drivers
  s390/dasd: remove unused pm related functions
  s390/zfcp: remove pm support from zfcp driver
  s390/ap: let bus_register() add the AP bus sysfs attributes
  ...

The UML random driver creates a dummy device under the guest,
/dev/hw_random. When this file is read from the guest, the driver
reads from the host machine's /dev/random, in-turn reading from
the host kernel's entropy pool. This entropy pool could have been
filled by a hardware random number generator or just the host
kernel's internal software entropy generator.

Currently the driver does not fill the guests kernel entropy pool,
this requires a userspace tool running inside the guest (like
rng-tools) to read from the dummy device provided by this driver,
which then would fill the guest's internal entropy pool.

This all seems quite pointless when we are already reading from an
entropy pool, so this patch aims to register the device as a hwrng
device using the hwrng-core framework. This not only improves and
cleans up the driver, but also fills the guest's entropy pool
without having to resort to using extra userspace tools in the guest.

This is typically a nuisance when booting a guest: the random pool
takes a long time (~200s) to build up enough entropy since the dummy
hwrng is not used to fill the guest's pool.

This port was originally attempted by Alexander Neville "dark" (in CC,
discussion in Link), but the conversation there stalled since the
handling of -EAGAIN errors were no removed and longer handled by the
driver. This patch attempts to use the existing method of error
handling but utilises the new hwrng core.

The issue can be noticed when booting a UML guest:

    [    2.560000] random: fast init done
    [  214.000000] random: crng init done

With the patch applied, filling the pool becomes a lot quicker:

    [    2.560000] random: fast init done
    [   12.000000] random: crng init done

Cc: Alexander Neville <dark@volatile.bz>
Link: https://lore.kernel.org/lkml/20190828204609.02a7ff70@TheDarkness/
Link: https://lore.kernel.org/lkml/20190829135001.6a5ff940@TheDarkness.local/
Cc: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Signed-off-by: Christopher Obbard <chris.obbard@collabora.com>
Acked-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>

This patch adds a dependency for KEYSTONE on HAS_IOMEM and OF to
prevent COMPILE_TEST build failures.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Driver of HiSilicon true random number generator(TRNG)
is removed from 'drivers/char/hw_random'.

Both 'Kunpeng 920' and 'Kunpeng 930' chips have TRNG,
however, PRNG is only supported by 'Kunpeng 930'.
So, this driver is moved to 'drivers/crypto/hisilicon/trng/'
in the next to enable the two's TRNG better.

Signed-off-by: Weili Qian <qianweili@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The s390-trng does provide 100% entropy. The quality value is supported
to be between 1 and 1024 and not 1..1000.  Use 1024 to make this driver
the preferred one. If we ever have a better driver that has the same
quality but is faster we can change this again when merging the new
driver. No need to be conservative.

This makes sure that the hw variant is preferred over things like
virtio-rng, where the hypervisor has a potential to be misconfigured
and thus should have a slightly lower confidence.

Cc: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

Clean up the check for irq. dev_err() is superfluous as
platform_get_irq() already prints an error. Check for zero
would indicate a bug. Remove curly braces to conform to
styling requirements.
Signed-off-by: Nigel Christian <nigel.l.christian@gmail.com>

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Pull crypto updates from Herbert Xu:
 "API:
   - Allow DRBG testing through user-space af_alg
   - Add tcrypt speed testing support for keyed hashes
   - Add type-safe init/exit hooks for ahash

  Algorithms:
   - Mark arc4 as obsolete and pending for future removal
   - Mark anubis, khazad, sead and tea as obsolete
   - Improve boot-time xor benchmark
   - Add OSCCA SM2 asymmetric cipher algorithm and use it for integrity

  Drivers:
   - Fixes and enhancement for XTS in caam
   - Add support for XIP8001B hwrng in xiphera-trng
   - Add RNG and hash support in sun8i-ce/sun8i-ss
   - Allow imx-rngc to be used by kernel entropy pool
   - Use crypto engine in omap-sham
   - Add support for Ingenic X1830 with ingenic"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (205 commits)
  X.509: Fix modular build of public_key_sm2
  crypto: xor - Remove unused variable count in do_xor_speed
  X.509: fix error return value on the failed path
  crypto: bcm - Verify GCM/CCM key length in setkey
  crypto: qat - drop input parameter from adf_enable_aer()
  crypto: qat - fix function parameters descriptions
  crypto: atmel-tdes - use semicolons rather than commas to separate statements
  crypto: drivers - use semicolons rather than commas to separate statements
  hwrng: mxc-rnga - use semicolons rather than commas to separate statements
  hwrng: iproc-rng200 - use semicolons rather than commas to separate statements
  hwrng: stm32 - use semicolons rather than commas to separate statements
  crypto: xor - use ktime for template benchmarking
  crypto: xor - defer load time benchmark to a later time
  crypto: hisilicon/zip - fix the uninitalized 'curr_qm_qp_num'
  crypto: hisilicon/zip - fix the return value when device is busy
  crypto: hisilicon/zip - fix zero length input in GZIP decompress
  crypto: hisilicon/zip - fix the uncleared debug registers
  lib/mpi: Fix unused variable warnings
  crypto: x86/poly1305 - Remove assignments with no effect
  hwrng: npcm - modify readl to readb
  ...

Replace commas with semicolons.  What is done is essentially described by
the following Coccinelle semantic patch (http://coccinelle.lip6.fr/):

// <smpl>
@@ expression e1,e2; @@
e1
-,
+;
e2
... when any
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Replace commas with semicolons.  What is done is essentially described by
the following Coccinelle semantic patch (http://coccinelle.lip6.fr/):

// <smpl>
@@ expression e1,e2; @@
e1
-,
+;
e2
... when any
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>